Carrier 24APA7 Performance- User Manual
Carrier 24APA7 Performance– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
of
Project No.
ADDITION TO ZION'S CAUSE BAPTIST CHURCH
11530
DATE
06/20/11
C
COPYRIGHT , 2011 - MARCUM ENGINEERING, LLC
PHONE - 270.444.9274 FAX - 270.443.1904
S
T
A
TE
OF KENTU
C
K
Y
HVAC SCHEDULES
H-5
?
DIFFUSER AND GRILLE SCHEDULE
PHYSICAL DATA
PERFORMANCE DATA
MARK
MFG.
MODEL
SIZE
(INCHES)
NECK
SIZE
(INCHES)
CORE
TYPE
NOM.
CFM
TYPE OF
MOUNTING
THROW
PRESS.
DROP
(IN. H2O)
SOUND
RATING
(NC)
VOLUME
DAMPER
FT. AT
50 FPM
DIR.
S-1
PRICE
SPD
12 X 12
PLAQUE
125
LAY-IN
9
4-WAY
0.097
<15
NO
S-2
PRICE
SPD
24 X 24
PLAQUE
200
LAY-IN
7
4-WAY
0.042
<15
NO
S-3
PRICE
SPD
24 X 24
PLAQUE
300
LAY-IN
9
4-WAY
0.065
<15
NO
S-4
PRICE
SDB100
48
2-SLOT
185
LAY-IN
21
ADJ.
0.087
19
NO
S-5
PRICE
SDB100
48
4-SLOT
310
LAY-IN
27
ADJ.
0.060
20
NO
S-6
PRICE
520
10 X 6
---
LOUVER
200
SURFACE
20
ADJ.
0.058
<15
YES
S-7
PRICE
520
16 X 8
---
LOUVER
250
SURFACE
23
ADJ.
0.017
<15
NO
R-1
PRICE
80
24 X 24
22 X 22
GRID
1,995
LAY-IN
---
---
0.038
<15
NO
R-2
GREENHECK
AFS-120
42 X 60
40 X 58
LOUVER
1,700
SURFACE
---
---
0.020
<15
NO
R-3
PRICE
REMARKS AND ACCESSORIES:
1
FURNISH DIFFUSERS WITH SQUARE-TO-ROUND NECK TRANSITIONS AS REQUIRED.
2
FURNISH ALL DIFFUSERS AND GRILLES WITH POWDER-COATED FINISH IN COLOR AS SELECTED BY ARCHITECT FROM ALL AVAILABLE
OPTIONS.
3
GRILLE TAGGED R-2 SHALL BE CONTRUCTED OF ALUMINUM SIGHT-PROOF BLADES FILLED WITH FORMED FIBERGLASS INSULATION FOR
SOUND ABSORPTION.
4
COORDINATE LOCATION OF DIFFUSERS TAGGED S-7 AND GRILLES TAGGED R-2 AND R-3 WITH ARCHITECTURAL DRAWINGS.
5
SEE HVAC DETAILS FOR THROW DIRECTIONS FOR DIFFUSERS TAGGED S-4 AND S-5.
PRICE, METAL-AIRE, TITUS, OR APPROVED EQUAL
AIR COOLED CONDENSING UNIT SCHEDULE
MARK
MFG.
MODEL
SIZE REFRIG.
COOLING CAPACITY
VOLTAGE
/ PHASE
MCA
(AMPS)
MOCP
(AMPS)
REMARKS AND
ACCESSORIES
TOTAL
(MBH)
SENSIBLE
(MBH)
SEER
CU-1
CARRIER
24APA7
48
R-410A
51.0
36.4
13.6
27.8
40
SEE BELOW
CU-2
CARRIER
24APA7
24
R-410A
25.6
18.7
16.5
13.6
20
SEE BELOW
CU-3
CARRIER
24APA7
36
R-410A
37.1
26.9
16.5
22.1
35
SEE BELOW
CU-4
CARRIER
24APA7
48
R-410A
51.0
36.4
13.6
27.8
40
SEE BELOW
CU-5
CARRIER
24APA7
24
R-410A
25.6
18.7
16.5
13.6
20
SEE BELOW
CU-6
CARRIER
24APA7
36
R-410A
37.1
26.9
16.5
22.1
35
SEE BELOW
REMARKS AND ACCESSORIES:
1
COMPRESSOR(S) SHALL HAVE AT MINIMUM FOUR (4) YEAR EXTENDED WARRANTY.
2
PROVIDE UNIT WITH FACTORY INSTALLED LOW PRESSURE SWITCH, HIGH PRESSURE SWITCH, CRANKCASE
HEATER, AND FILTER DRIER.
3
CONDENSING UNIT AND MATCHING INDOOR DX COIL SHALL BE FURNISHED BY FURNACE MANUFACTURER.
4
5
6
MAINTAIN MINIMUM MANUFACTURERS RECOMMENDED CLEARANCES.
7
PROVIDE UNIT WITH LOUVERED COIL/HAIL GUARD.
8
PROVIDE UNIT WITH THERMAL OVERLOAD PROTECTION.
9
PROVIDE UNIT WITH TWO (2) STAGE SCROLL COMPRESSOR FOR TWO (2) STAGE COOLING.
10
PROVIDE UNIT WITH SOUND BLANKET AND MOTOR/BLOWER VIBRATION ISOLATION TO MINIMIZE UNIT NOISE.
CARRIER, TRANE, YORK, OR APPROVED EQUAL
FURNACE SCHEDULE
MARK
MFG.
MODEL
TYPE
CONFIGURATION
SIZE
CFM
EXT.
S.P.
DRIVE
MOTOR
H.P.
RPM
NATURAL GAS FIRED FURNACE DATA
COND.
UNIT
ELECTRICAL DATA
REMARKS AND
ACCESSORIES
INPUT
(MBH)
OUTPUT
(MBH)
EFF.
FLUE
SIZE
FLUE TYPE
MCA
(AMPS)
MOCP
(AMPS)
VOLTAGE/
PHASE
F-1
CARRIER
58MEC
UPFLOW
100-20
1,600
0.5
DIRECT
1.0
1,050
100.0
93.0
93%
3"
CONCENTRIC
CU-1
15.9
20
SEE BELOW
F-2
CARRIER
58MEC
HORIZONTAL
060-12
800
0.5
DIRECT
1/2
1,050
60.0
56.0
93%
2"
CONCENTRIC
CU-2
11.0
15
SEE BELOW
F-3
CARRIER
58MEC
HORIZONTAL
080-12
1,200
0.5
DIRECT
1/2
1,050
80.0
75.0
94%
2"
CONCENTRIC
CU-3
11.0
15
SEE BELOW
F-4
CARRIER
58MEC
UPFLOW
100-20
1,600
1.0
DIRECT
1.0
1,050
100.0
93.0
93%
3"
CONCENTRIC
CU-4
15.9
20
SEE BELOW
F-5
CARRIER
58MEC
HORIZONTAL
060-12
800
0.5
DIRECT
1/2
1,050
60.0
56.0
93%
2"
CONCENTRIC
CU-5
11.0
15
SEE BELOW
F-6
CARRIER
58MEC
HORIZONTAL
080-12
1,200
0.5
DIRECT
1/2
1,050
80.0
75.0
94%
2"
CONCENTRIC
CU-6
11.0
15
SEE BELOW
REMARKS AND ACCESSORIES
1
FURNISH UNIT WITH A TWENTY (20) YEAR LIMITED HEAT EXCHANGER WARRANTY AND ONE (1) YEAR PARTS AND LABOR WARRANTY.
2
PROVIDE WITH MATCHING CASED DX COOLING COIL BY FURNACE MANUFACTURER. UNIT SHALL BE SUITABLE FOR TWO (2) STAGE COOLING.
3
PROVIDE UNIT WITH 1" THICK FIBERGLASS FILTERS.
4
MAINTAIN MANUFACTURER'S MINIMUM CLEARANCES.
5
PROVIDE UNIT WITH AT MINIMUM FIVE (5) SPEED ECM MOTOR.
6
PROVIDE UNIT WITH AT MINIMUM TWO (2) STAGE NATURAL GAS HEAT.
7
PROVIDE UNIT WITH MANUFACTURER'S CONENTRIC VENT.
8
PROVIDE UNIT WITH 7-DAY PROGRAMMABLE THERMOSTAT CAPABLE OF CONTROLLING ALL UNIT FUNCTIONS.
CARRIER, TRANE, YORK, OR APPROVED EQUAL
ELECTRIC UNIT HEATER SCHEDULE
MARK
MFG.
SERVICE
MODEL
SIZE
CFM
MOUNTING
HEIGHT
KW
VOLTAGE/
PHASE
MCA
(AMPS)
MOCP
(AMPS)
REMARKS AND
ACCESSORIES
UH-1
QMARK
STORAGE &
EQUIPMENT 108
MUH
05-81
350
7' - 6"
5.0
30.0
35
SEE BELOW
UH-2
QMARK
MECH. ROOM 134
MUH
03-21
350
7' - 6"
2.2
13.8
20
SEE BELOW
REMARKS AND ACCESSORIES:
1
MOUNTING HEIGHT IS FROM FINISHED FLOOR TO BOTTOM OF UNIT.
2
PROVIDE UNIT WITH THERMAL OVERLOAD PROTECTION.
3
PROVIDE WITH NON-FUSED ELECTRICAL DISCONNECT SWITCH WITH SINGLE POINT ELECTRICAL CONNECTION.
4
PROVIDE UNIT WITH AUTOMATIC RESET CONTROL.
5
PROVIDE UNIT WITH ADJUSTABLE DISCHARGE LOUVERS.
6
MAINTAIN MANUFACTURER'S MINIMUM RECOMMENDED CLEARANCES.
7
PROVIDE WITH UNIT MOUNTED THERMOSTAT.
MARKEL, QMARK, REZNOR, OR APPROVED EQUAL
LOUVER SCHEDULE
MARK
MFG.
DESCRIPTION
MODEL/TYPE
SIZE
(INCHES)
CFM
FREE AREA
(SQ. FT.)
FACE VELOCITY
(FPM)
PRESSURE
DROP
(IN. H2O)
TYPE OF
FRAME AND
MOUNTING
MOUNTING
HEIGHT
SERVICE
REMARKS AND
ACCESSORIES
L-1
GREENHECK
COMBINATION
LOUVER/DAMPER
EAC-601
32 X 16 X 6
155
0.75
207
0.01
CHANNEL
16' - 4"
VENT. AIR INTAKE
SEE BELOW
L-2
GREENHECK
COMBINATION
LOUVER/DAMPER
EAC-601
32 X 16 X 6
460
0.75
614
0.05
CHANNEL
16' - 4"
VENT. AIR INTAKE
SEE BELOW
L-3
GREENHECK
COMBINATION
LOUVER/DAMPER
EAC-601
16 X 16 X 6
230
0.34
678
0.06
CHANNEL
8' - 0"
VENT. AIR INTAKE
SEE BELOW
REMARKS AND ACCESSORIES:
1
MOUNTING HEIGHT MEASURED FROM BOTTOM OF LOUVER TO TOP OF FINISHED FLOOR. REFER TO ARCHITECTURAL PLANS FOR FINISHED MOUNTING HEIGHT AND LOCATION.
2
SIZES ARE SPECIFIED AS: FIRST FIGURE-WIDTH, SECOND FIGURE-HEIGHT, AND THIRD FIGURE- DEPTH.
3
PROVIDE UNIT WITH EXTENDED SILL.
4
PROVIDE UNIT IN ALUMINUM CONSTRUCTION.
5
PROVIDE UNIT WITH ALUMINUM BIRD SCREEN.
6
PROVIDE UNIT WITH 70% KYNAR FINISH. COLOR TO BE SELECTED BY ARCHITECT.
7
INSTALL UNIT IN 18 GAUGE SHEETMETAL WALL SLEEVE.
8
GREENHECK, NCA, RUSKIN, OR APPROVED EQUAL
VENTILATING FAN SCHEDULE
PHYSICAL DATA
PERFORMANCE DATA
UNIT OPERATION CONTROL
ELECTRICAL DATA
REMARKS AND
ACCESSORIES
MARK
MFG.
AREA SERVED
MODEL/
TYPE
SIZE
APPROX.
UNIT
WEIGHT
(LBS.)
MOUNTING
RATED
CFM
ESP
(IN. H2O)
DRIVE
FRPM
MOTOR
TYPE
MOTOR
RPM
dBA
SWITCH
OCC.
T-STAT
WATTS
HP
ELECT.
CHAR.
EF-1
GREENHECK
MENS TOILET 133
SP
A410
50
CEILING
300
0.15
DIRECT
826
ODP
1,000
36
X
121
---
1-6
EF-2
GREENHECK
JANITOR 131
SP
A70
20
CEILING
40
0.15
DIRECT
697
ODP
850
29
X
20
---
1-6
EF-3
GREENHECK
WOMENS TOILET 113
SP
A410
50
CEILING
300
0.15
DIRECT
826
ODP
1,000
36
X
121
---
1-6
EF-4
GREENHECK
TOILET 117
SP
A90
20
CEILING
50
0.15
DIRECT
709
ODP
900
27
X
29
---
1-6
EF-5
GREENHECK
TOILET 124
SP
A90
20
CEILING
50
0.15
DIRECT
709
ODP
900
27
X
29
---
1-6
EF-6
GREENHECK
TOILET 127
SP
A90
20
CEILING
50
0.15
DIRECT
709
ODP
900
27
X
29
---
1-6
EF-7
GREENHECK
STORAGE & EQUIPMENT 108
AP
A200
35
CEILING
200
0.15
DIRECT
850
ODP
900
39
X
48
---
1-6
EF-8
GREENHECK
TOILET 208
SP
A90
20
CEILING
50
0.15
DIRECT
709
ODP
900
27
X
29
---
1-6
EF-9
GREENHECK
ALTERNATE TOILET
SP
A110
25
CEILING
75
0.15
DIRECT
834
ODP
950
30
X
49
---
1-7
EF-10
GREENHECK
ALTERNATE TOILET
SP
A110
25
CEILING
75
0.15
DIRECT
834
ODP
950
30
X
49
---
1-7
REMARKS AND ACCESSORIES:
1
PROVIDE UNIT WITH ALUMINUM INTAKE GRILLE WITH WHITE ENAMEL FINISH.
2
PROVIDE UNIT WITH ROUND DUCT CONNECTOR.
3
PROVIDE UNIT WITH CAST ALUMINUM BRICK VENT TERMINATION WITH 70% MINIMUM KYNAR FINISH AND INTEGRAL BACKDRAFT DAMPER (GREENHECK MODEL BVC OR EQUAL). COLOR TO BE SELECTED BY ARCHITECT.
4
PROVIDE UNIT WITH SOLID-STATE FAN SPEED CONTROL.
5
PROVIDE UNIT WITH VIBRATION ISOLATION KIT.
6
PROVIDE UNIT WITH THERMAL OVERLOAD PROTECTION.
7
THIS UNIT SHALL BE FURNISHED AS AN ALTERNATE. REFERENCE ARCHITECTURAL DRAWINGS FOR APPROPRIATE ALTERNATE NUMBER.
UNIT OPERATION CONTROL:
SWITCH - UNIT SHALL BE CONTROLLED BY INDEPENDENT PILOT LIT SWITCH.
OCC. - UNIT SHALL BE ELECTRICALLY INTERLOCKED WITH AND CONTROLLED BY ZONE LIGHT CONTROL.
T-STAT - NOT USED.
COOK, GREENHECK, PENNBARRY, OR APPROVED EQUAL
PACKAGED AIR CONDITIONING UNIT WITH NATURAL GAS HEAT SCHEDULE
UNIT PHYSICAL DATA
COOLING PERFORMANCE
NATURAL GAS HEAT PERFORMANCE
ELECTRICAL DATA
REMARKS AND
ACCESSORIES
MARK
MFG.
MODEL
SIZE
CONFIG.
REFRIG.
APPROX.
UNIT
WEIGHT
(LBS.)
OUTSIDE
AIR
(CFM)
SUPPLY FAN DATA
COOLING CAP.
(S)EER @
AHRI COND.
INPUT
(MBH)
OUTPUT
(MBH)
AFUE
EFFICIENCY
(%)
TEMP.
RISE
VOLTAGE /
PHASE
MCA
(AMPS)
MOCP
(AMPS)
CFM
ESP
(IN. H20)
MOTOR
POWER
(BHP)
MOTOR
RPM
TOTAL
(MBH)
SENSIBLE
(MBH)
AC-1
CARRIER
48TCE
09
HORIZONTAL
R-410A
1,000
335
3,400
0.8
1.2
750
100.4
72.0
11.0
180.0
147.6
82%
46
40.0
50
1-24
AC-2
CARRIER
48TCE
09
HORIZONTAL
R-410A
1,000
335
3,400
0.8
1.2
750
100.4
72.0
11.0
180.0
147.6
82%
46
40.0
50
1-24
AC-3
CARRIER
48TCE
04
HORIZONTAL
R-410A
500
250
1,200
0.6
0.5
855
35.7
26.3
13.0
115.0
93.0
81%
72
19.4
25
1-21
AC-4
CARRIER
48TCE
05
HORIZONTAL
R-410A
600
230
1,600
0.8
0.7
973
46.8
32.8
13.0
115.0
93.0
81%
59
23.5
30
1-21
AC-5
CARRIER
48ES
024
HORIZONTAL
R-410A
300
95
800
0.5
0.3
1,050
23.0
17.0
13.2
40.0
32.0
80%
50
19.7
30
1-16, 25
REMARKS AND ACCESSORIES:
1
TEMPERATURE.
2
PROVIDE UNIT WITH THERMOSTATIC EXPANSION VALVES (TXV) ON ALL DX COILS.
3
PROVIDE UNIT WITH AT MINIMUM TWO (2) STAGE HEATING.
4
PROVIDE UNIT WITH STAINLESS STEEL HEAT EXCHANGER.
5
PROVIDE UNIT WITH HINGED, GASKETED CABINET ACCESS DOORS.
6
PROVIDE UNIT WITH AT MINIMUM 1" THICK, DOUBLE-WALL INSULATED HOUSING.
7
PROVIDE UNIT WITH 2" THICK, 30% EFFICIENT PLEATED FILTERS.
8
PROVIDE UNIT WITH MOTOR/BLOWER VIBRATION ISOLATION.
9
PROVIDE UNIT WITH HAIL-GUARD ON CONDENSING COIL.
10 PROVIDE UNIT WITH UNIT-MOUNTED, NON-FUSED WEATHERPROOF DISCONNECT SWITCH WITH SINGLE-POINT ELECTRICAL CONNECTION.
11 PROVIDE UNIT WITH THERMAL OVERLOAD PROTECTION.
12 PROVIDE UNIT WITH ONE (1) YEAR PARTS AND LABOR WARRANTY, FIVE (5) YEAR COMPRESSOR WARRANTY, AND TEN (10) YEAR HEAT EXCHANGER WARRANTY.
13 THE CONTRACTOR SHALL FURNISH AND INSTALL AN ADDITIONAL SHEAVE, IF NECESSARY, TO BRING AIR SYSTEM TO WITHIN 10% OF DESIGN.
14 MAINTAIN MANUFACTURER'S RECOMMENDED MINIMUM CLEARANCES.
15 PROVIDE UNIT WITH MANUFACTURER'S START-UP AND CERTIFIED REPORT. INSTALLING CONTRACTOR START-UP IS NOT ACCEPTABLE.
16 PROVIDE UNIT WITH 7-DAY PROGRAMMABLE THERMOSTAT CAPABLE OF CONTROLLING ALL UNIT FUNCTIONS.
17 PROVIDE UNIT WITH ELECTRICAL PHASE LOSS PROTECTION.
18 PROVIDE UNIT WITH MODULATING HOT GAS REHEAT FOR HUMIDITY CONTROL.
19 PROVIDE UNIT WITH RETURN AIR HUMIDITY SENSOR FOR CONTROL OF DEHUMIDIFICATION CYCLE.
20 PROVIDE UNIT WITH MODULATING OUTSIDE AIR DAMPER FOR CO2 DEMAND VENTILATION CONTROL.
21 PROVIDE UNIT WITH RETURN AIR MOUNTED CO2 SENSOR FOR DEMAND VENTILATION CONTROL.
22 PROVIDE UNIT WITH SMOKE DETECTOR MOUNTED IN THE RETURN-AIR STREAM TO SHUT DOWN UNIT OPERATION AND INITIATE AN ALARM CONDTION AT THE PRESENCE OF SMOKE.
23 PROVIDE UNIT WITH TWO (2) INDEPENDENT REFRIGERANT CIRCUITS FOR TWO (2) STAGE COOLING.
24 PROVIDE UNIT WITH FULLY-MODULATING ECONOMIZER WITH COMPARATIVE ENTHALPY CONTROL FOR AIRSIDE ECONOMIZER OPERATION.
25 PROVIDE UNIT WITH MANUAL OUTSIDE AIR DAMPER.
CARRIER, TRANE, YORK, OR APPROVED EQUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
