Capresso Z5 - Manual
Capresso Z5 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – C O F F E E R E A D Y; ACS
- Page 3 – Please note; Thermal Milk Container:; Coffee Coffee; COFFEE READY
- Page 5 – Overriding the Milk Volume for the Cappuccino Button:
- Page 10 – Push Dial to get to COFFEE READY; CUSTOMER SERVICE; Monday through Thursday 9AM – 9PM
Impressa
Z5/Z6
Quick
Reference
Guide
This Guide does not replace the Operating Instructions.
For details and cautions you must read all instructions.
Watch the DVD instructions!
Traces of Coffee Grounds in New Machine?
This is normal! Grinder was tested during assembly with
beans. Despite cleaning, traces of ground coffee may
be found.
RED TEXT
represents display text. Illustration numbers
on next page correspond with Operating Instructions.
A) First Time Ever Preparation
1. Fill water in tank, open Cover Lid (spring activated!),
remove Bean Container Safety Lid and add beans.
Only regular beans, no flavored or coated beans!!!
Replace Bean Container Safety Lid (Fig. 4).
2. DO NOT install the Clearyl Filter Cartridge now!
3. Turn the Main Power Switch on (bottom left by cord).
4. Push On/Off button on top (Fig. 3). Place a large cup
under the Hot Water Spout / Coffee Spouts and one
under the Auto Cappuccino System (ACS) (Fig. 5e).
PRESS RINSE
. Push the Rinse button.
SYSTEM
FILLS
, then
WELCOME TO JURA
then
UNIT IS
HEATING
then
PRESS RINSE
. Press the Rinse
Button.
COFFEE READY
.
5. Leave the cup under the coffee spouts and push the
1-cup Espresso Button.
FILL BEANS
. Push the
1-cup Espresso Button again. Wait until the Z5/Z6
displays
COFFEE READY
. Discard the coffee.
6. Your next cup will be perfect.
B) Daily Preparation
• Fill fresh water in tank and check bean container.
• Push On/Off button (Fig. 3).
MACHINE IS HEATING
then
RINSE
. Place a cup under the coffee spouts
and press the Rinse Button.
COFFEE READY
.
C) Installing the Auto Cappuccino System (ACS)
• Attach the Dial Component to the Dual Fixed Spouts.
(Fig. 5c)
65351R2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Bean container safety lid Lid for ground coffee Grind selector Fig. 5c Fig. 5d Fig. 5e Gap Coffee Nozzle Milk Nozzle Fig. 5f Milk & Froth(Cappuccino) Milk only(Latte) Steam only(Rinsing) Fig. 3 Milk Cappuccino Latte Special Coffee Hot Water 1-Cup 2-Cup 1-Cup 2-Cup Espresso Coffee On/Off Rotary D...
• Then attach the long Dual Nozzle System to the Dial component (Fig. 5d). Please note : The milk nozzle should sit tight. The coffee nozzle must have a gap(Fig. 5e). Make sure the dial points to the cup with saucer for cappuccino (Fig. 5f). • Attach the long hose to the dial component and insert th...
K) Adjusting the GrinderImportant: You can only adjust the fineness during the actual grinding process.• For darker, oily beans, grind somewhat coarser. For lighter beans, grind somewhat finer. • Open the Cover Lid and turn the Grind Selector while grinding (Fig. 4). Coarser: turn the dial towards t...
