Bush Hog FTH 600 - Manual

IMPORTANT FEDERAL LAWS AND REGULATIONS* CONCERNING EMPLOYERS, EMPLOYEES AND OPERATIONS. *(This section is intended to explain in broad terms the concept and effect of the following federal laws and regulations. It is not intended as a legal interpretation of the laws and should not be considered as ...

1-1 INTRODUCTION We are pleased to have you as a Bush Hog cus-tomer. Your ATH/FTH Series Rotary Cutter hasbeen carefully designed to give maximum servicewith minimum down time.This manual is provided togive you the necessary operating and maintenanceinstructions for keeping your rotary cutter in top...

2-1 ATTACHING TO TRACTOR A. Attach to tractor Cat. I three point hitch as described in tractor operator’s manual. SECTION II PREPARATION FOR USE B. Raise and lower cutter to determine position with shortest distance between the tractor PTO shaftand gearbox input shaft. Shut down tractor leavingcutte...

SECTION III OPERATING INSTRUCTIONS 3-1 GENERAL SAFETY Only qualified people familiar with this operator’smanual and tractor operator’s manual should oper-ate this machine. Operator should wear hard hat,s a f e t y g l a s s e s a n d s a f e t y s h o e s . T h e o p e r a t o rshould read, understa...

SECTION IV MAINTENANCE 4-1 MAINTENANCE CHECK LIST Perform scheduled maintenance as outlined below.Lower implement to ground, turn off tractor, and setparking brake before doing maintenance inspectionsor work. Some checks may require raising machineoff ground and supporting with blocks. All boltss h ...

4-6 TROUBLESHOOTING Troubleshooting procedures are listed in Table 4-1 below. If the problem cannot be solved or replacement partsare necessary, contact your authorized Bush Hog dealer. Please have ready your machine name, model num-ber, serial number, purchase date and exact cause or description of...

T H E F O L L O W I N G S A F E T Y P R E C A U T I O N SS H O U L D B E T H O R O U G H L Y U N D E R S T O O DBEFORE ATTEMPTING MACHINE ASSEMBLY. 1. Wear personal protective equipment such as, but not limited to, protection for eyes, ears, feet,hands, lungs and head when assembling the equip-ment....

SAFETY DECALS To promote safe operation, Bush Hog supplies safety decals on all products manufactured. Because damagecan occur to safety decals either through shipment, use or reconditioning, Bush Hog will, upon request, providesafety decals for any of our products in the field at no charge. Contact...

BOLT DIAMETER WRENCH (IN.) “B” AND SAE SAE SAE SIZE (IN.) “A” THREAD SIZE GRADE 2 GRADE 5 GRADE 8 7/16 1/4 - 2O UNC 6 (7) 8 (11) 12 (16) 7/16 1/4 - 28 UNF 6 (8) 10 (13) 14 (18) 1/2 5/16 - 18 UNC 11 (15) 17 (23) 25 (33) 1/2 5/16 - 24 UNF 13 (17) 19 (26) 27 (37) 9/16 3/8 - 16 UNC 20 (27) 31 (42) 44 (6...