Buffalo Technology WZR-G300N - Manual
Buffalo Technology WZR-G300N – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step 1: Connect Your Equipment
- Page 3 – Step 2: Configure Your Router; AirStation with an Ethernet cable for initial configuration.; root; blank
- Page 4 – System Info; Step 3: Configure Wireless Settings
- Page 6 – AOSS; Client Manager Software; Alternative Step 3: Configure Wireless Settings with AOSS
- Page 7 – Buffalo Technology Technical Support; Technical Support using the following information:
- Page 8 – Europe – EU Declaration of Conformity; Safety of Information Technology Equipment; Intended use; EU and EFTA member states.; EU Countries intended for use
- Page 9 – EU countries not intended for use; None; Potential restrictive use; EU and EFTA member states, except in France, Belgium
- Page 10 – MEMO
- Page 11 – BUFFALO WARRANTY STATEMENT; obligation to notify any individual or entity.; Important Notice; with a copy of proof of purchase.
- Page 12 – BUFFALO TECHNOLOGY UK LTD
http://www.buffalo-technology.com/
Quick Setup Guide - AirStation Draft-N WZR-G300N
Nfiniti Wireless Router & AP
PY00-32004-DM20-01
Package Contents
•
WZR-G300N AirStation
•
Base Stand
•
AC Adapter and Power Cable
•
CAT5 LAN cable
•
Utility CD with Manual
•
Quick Setup Guide
•
Warranty Statement
1-01
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 . Make sure that all equipment is powered off, including the AirStation, PCs, and your cable or DSL modem. 2 . Connect the Ethernet cable from your cable or DSL modem to the WAN port on your AirStation. The WAN port is the port closest to the power connector. This is the only port that will work f...
Step 2: Configure Your Router Next, you need to configure your router. This is done from a web browser on a computer connected to the router. We recommend that you use a wired computer that is plugged into the AirStation with an Ethernet cable for initial configuration. 1 . Launch the web browser on...
A . From a web bowser or a PC on the network, log in to the AirStation Configuration Utility. Open a web browser, type http://192.168.11.1 into the address field and press Enter. Enter root as the User name and leave the password field blank. This will take you to the Home page, where you can click ...
