Buffalo Technology WLI-U2-KG125S - Manual

5 Select Install Wireless Drivers . Click Next . AirNavigator

The Software License Agreement will appear. Select Agree and then click Next . If you have Windows XP on your PC, turn to page 7 to install your adapter. If you are using Windows 98se, Me, or 2000, turn to page 8. AirNavigator - Installing Drivers

Installing with Windows XP 2. Installing the Wireless USB Adapter with Windows XP * : Plug the Wireless USB Adapter or stand into an available USB port on your PC. The Found New Hardware Wizard will launch automatically. If this screen doesn’t appear, remove the Wireless USB Adapter and restart the ...

11 3. Installing Client Manager Client Manager lets you configure your wireless network, survey and connect to available access points, enable and use WEP encryption, initiate AOSS, and create connection profiles. Note: During Installation, Client Manager disables Windows XP’s Zero Configuration Too...

1 You may use Client Manager to configure your wireless network manually. Client Manager consists of the Status page, the Survey page, and the Profiles page. You can access each page by clicking the corresponding button at the top of Client Manager. Several dialog boxes are also available. You can a...

15 • Network Type – Displays whether network is in Ad-Hoc or Infrastructure mode. • Rate – The speed of communication between wireless devices. If the Client Manager is not connected to a remote wireless device (access point or another client), no rate will be displayed. • Channel – The channel that...

1 Click the Scan button to open this page. Here, you can survey the area, display available access points, and connect to available access points. This page includes the following components: • SSID – The SSID is the “name” of a wireless network. Each wireless device on a network must use identical ...

1 This dialog will open. If you are not using encryption, just click Connect to connect to your network. If your AP uses encryption, the correct encryption type should already be selected automatically in the Encryption Method drop down list. Only change this setting if necessary.The Encryption Key ...

1 Profiles Page Click the Profiles tab to open this page. Use this page to access your profiles. Profiles allow you to save the information associated with a specific wireless network so you can quickly and easily connect to that network when you are in that location. The Profiles page allows you to...

19 New Profile Dialog Box • Select Profile – Select whether the profile is for a wireless or wired connection. • Profile Name – Enter the name you want to associate with the new profile. • Network Type – Select the network mode you want to associate with the new profile. Select Infrastructure if you...

20 Advanced Profile Options • Network Tab – Displays the network information tab. A static IP can be specified for this wireless profile here. It is not recommended to change any of these settings unless specified by an administrator. • Browser Tab – Displays settings to change your browser preferen...

21 Your WLI-U2-KG125S has its AOSS button in the Client Manager 3 software. If your router or access point supports AOSS, then AOSS will let you connect the WLI-U2-KG125S to your wireless network, easily and securely.Start Client Manager by double clicking on the black antenna icon in your System Tr...

2 Wireless Zero Configuration Wireless Zero Configuration Service (Windows XP) Windows XP offers the Wireless Zero Configuration Service to support 802.11a, 802.11b and 802.11g wireless networking. This service automatically polls the area for available wireless access points. If an available wirele...

25 Using Wireless Zero Configuration: Normally, Windows XP will scan for available wireless access points once the Wireless Notebook Adapter is installed. If Windows detects an access point, a networking icon appears on the task bar. One or more wireless networks are available appears as a caption a...

2 Click the Advanced button to enter an SSID network name or WEP/WPA encryption key manually. To add an SSID network name that is not listed, click the Add button. Connecting

2 Specifications Wireless LAN Interface Standards Compliance IEEE802.11g, IEEE802.11b Communication Protocol Direct Sequence Spread Spectrum (DS-SS), Half Duplex Frequency Range 2.412-2.472Ghz Transmission Rate 802.11g: 1, 2, 5.5, 11, 18, 24, 36, 48, 54Mbps 125* Mode: 13, 20, 27, 40, 54, 80, 110, 12...

29 Troubleshooting / FAQ Use this section to locate answers to frequently asked questions. What should I do if I already have a version of Client Manager on my PC? Update your Client Manager to the version on the CD. If you do not update your Client Manager, there could be a loss of functionally, as...

0 Troubleshooting / FAQ Why won't Client Manager function properly? In Windows XP, the Wireless Zero Configuration Service conflicts with Client Manager. Normally, Zero Config is disabled when Client Manager is installed, but other software may turn it back on. You may disable Wireless Zero Config m...

5 Contact Information (Europe) ADDRESS Buffalo Technology (Europe), Inc. 176 Buckingham Avenue, Slough, Berkshire, SL1 4RD United Kingdom GENERAL INQUIRIES Email: [email protected] TECHNICAL SUPPORT Technical Support in Europe is available between the hours of 9am-6pm (GMT) Mon - day to T...