Buffalo Technology WLI-TX1-G54 - Manual
Buffalo Technology WLI-TX1-G54 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step; Connect Using; Internet Protocol; Windows Setup
- Page 3 – OSX; Show; Macintosh Setup
- Page 6 – Windows
- Page 7 – Connect via; Ethernet; Configure; Using DHCP; Macintosh
- Page 8 – support using the following information:; User Manual; Available on the AirNavigator CD enclosed with your purchase.; Web; the Buffalo Technology website.; FCC Compliance Statement -
1
®
Quick Setup Guide
54Mbps Wireless Ethernet Converter-g
WLI-TX1-G54
Use this guide to quickly and easily install
your
Wireless Ethernet Converter-g
.
For detailed information, refer to the User
Manual on the Utility CD or refer to the
Buffalo Wireless Support Web Pages
.
Contents
◗
54Mbps Wireless Ethernet Converter
◗
CD-ROM
◗
7ft. Ethernet Cable
◗
AC Adapter
◗
Quick Setup Guide
◗
Warranty Statement
If any items are missing, please contact
the reseller from whom you purchased
this product.
System Requirements
◗
Desktop or Notebook Computer
with an available Ethernet (RJ-45)
port
◗
Web browser 5.0 or later
◗
802.11b or 802.11g access point
(Infrastructure Mode) OR a different
computer with an 802.11b or 802.11g
wireless adapter (Ad-hoc Mode).
www.buffalotech.com/wireless
PY00-29007-DM20 Rev A
AirStation 54Mbps Ethernet
Converter
.
•
•
54Mbps Wireless
Ethernet Converter.
www.buffalotech.com/wireless
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 2 Installation & Configuration Using Web Interface Step Installing the Wireless Ethernet Converter-g Install the Ethernet Converter to a computer by connecting one end of the included Ethernet cable into an available Ethernet port on your computer and the other end to the Ethernet Converter. E...
3 Select Use the following IP Addres s. Enter 1.1.1.2 into the IP Address field. Enter 255.255.255.0 into the Subnet Mask field. Click OK . Click OK again under the Network Properties window. OSX - Open your System Preferences and select Network . Set Show to Built-in Ethernet Set Configure to Manua...
6 Step Reset the TCP/IP settings of your computer Open your network properties. Connect Using should be set to use your active Ethernet NIC Card. Select Internet Protocol (TCP/IP). Click Properties Select Obtain and IP Address Automatically . Click OK . Click OK again under the Network Properties wi...
