Buffalo Technology WLE-POE-R33 - Manual
Buffalo Technology WLE-POE-R33 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Mounting to the Wall Mount Kit; Installation; Mounting to the Wall; Standing on the Floor or Table
- Page 3 – Connecting the Devices; WARNING: Always connect the Power Supply Adapter to the; Compatible Power Supply Adapters; Connections
- Page 4 – Specifications
- Page 5 – FCC Statement
- Page 7 – Notes
■
NOTE: The WLE-POE-R33/R7 Adapter must be used with a compatible Power
Supply Adapter when supplying power to the AirStation. Check the specifications
on Page 4 to verify compatibility.
Package Contents:
Power Over Ethernet Receiver
Connecting to your
Power-Over-Ethernet Receiver
(WLE-POE-R33 / WLE-POE-R7)
The WLE-POE-R33/R7 Adapter is an adapter
that supplies power to the AirStation via a Power
Supply Adapter (such as the WLE-POE-S). Using
this product enables the AirStation to be used in
locations that are not provided with a nearby power
supply. The WLE-POE-R33/R7 Adapter can be
installed on the AirStation Wall Mounting Kit
(WLE-WK / WLE-WK33), which are sold
separately.
PY00-29025-DM20
◗
POE Receiver Adapter 1
(WLE-POE-R33 -OR- WLE-POE-R7)
◗
Attachment Bracket
1
◗
LAN Patch Cable
1
◗
5mm Screws
2
(For mounting product to bracket)
◗
12mm Screws
2
(For mounting bracket Wall Mount Kit)
◗
16mm Screws
2
(For mounting bracket to wall)
◗
Rubber Feet
4
◗
Setup Guide
1
(This guide)
◗
Warranty Certificate
1
Precautions:
◗
After properly connecting all the devices, turn ON the power to the Supply
Adapter.
◗
Always connect the Supply Adapter to the Receiver Adapter's POE port.
◗
The Receiver and Supply cannot be attached by CAT5 longer then 100M.
◗
Use POE CAT5 cables (all eight wires)
◗
The products will become warm during use; this does not indicate
malfunction.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Mounting to the Wall Mount Kit ■ NOTE: It is recommend to remove the Wall Mount Kit from the wall first. ◗ Mount the attachment to the Wall Mount Kit as show in the following diagram. ◗ Align the attachment screw holes (for mounting this product) with the screw holes on the rear panel of the POE Re...
3 Connecting the Devices ■ WARNING: Always connect the Power Supply Adapter to the POE Receiver's POE port. Connecting to the LAN port may result in damage or burnout of the equipment. Connecting a hub or PC to the POE port may result in damage or burnout of the hub or PC. ◗ Connect the AirStation t...
4 Specifications WLE-POE-R33 | WLE-POE-R7 Transmission Rate 100 Mbps (100BASE-TX) 10 Mbps (10BASE-T) POE Port 100BASE-TX / 10BASE-T dual purpose port (for connecting the Power Supply Adapter) LAN Port 100BASE-TX / 10BASE-T dual purpose port (for connecting the AirStation) Input Power Supply 36 to 57...
