Buffalo Technology WLA-G54C - Manual
Buffalo Technology WLA-G54C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Additional Requirements:; Desktop or Laptop PC with Wired or Wireless Ethernet
- Page 3 – Setting up the Router WBR-G54; Note: You can use either a Wired or Wireless connection from the PC; It is strongly recommended; you
- Page 4 – Wired; Locate the provided Ethernet cable and connect one end to; Perform the next step for both Wireless; AND; Wired Router; Locate Power adapter for the Wireless Router and Plug in to; Perform the next step for; Wireless; You will need the SSID of your router to properly connect; The Remaining Steps apply to both Wired and Wireless; Power up you Cable or DSL Modem
- Page 6 – Step 3 Access the AirStation confi guration page
- Page 8 – : If your ISP requires; PPPoE Connection: IF your ISP requires PPPoE; FOR CABLE Broadband Service:; Click on the CATV button
- Page 9 – Click the link appropriate to your Cable Providers Requirements:; The IP Address is Acquired Automatically; If your provider requires you; NOTE; : If at any time you wish to restore to factory defaults, press the
- Page 11 – A. Using a signal strength indicator to determine the best; Ensure you are connected; : Consult the documentation that came with your Wireless
- Page 12 – : Refer to your Wireless manufactures documentation for
- Page 13 – Surveying your Environment:; Note areas where the signal strength begins to drop off.
- Page 14 – : To achieve maximum overall range, you may place the; : Alternatively, to use your repeater to avoid obstructions
- Page 15 – : The ranges given in the above step are estimates only, the; Windows XP users (Using Windows XP wireless Zero; : Consult your XP documentation for proper confi guration of
- Page 16 – Other Windows Versions (Client Manager Software
- Page 17 – Check Signal Strength:
- Page 18 – Backing Up and Restoring your Confi guration; Backing Up; : See further information in this manual for details of connecting
- Page 19 – The Main Device confi guration screen will appear:; : The screen shown below is the main confi guration screen for
- Page 20 – Restoring; Click the restore button.
- Page 21 – Device Pre-configuration Settings; These settings can be used to manually restore Kit settings
- Page 22 – Wireless LAN; WBR-G54 Specifications; Wired LAN
- Page 23 – WLA-G54C Specifications
1
Package Contents
◗
WBR-G54 Wireless
1
Broadband Base Station-g
◗
WLA-G54C Wireless
1
Compact Repeater Bridge-g
◗
Ethernet Cable
1
◗
3V Power Supplies
2
◗
CD with Manuals
1
◗
Setup Guide
1
◗
Warranty Statement
1
If any item is found missing or damaged, please contact your local
reseller or retailer for replacement.
Setup Guide
Wireless Router/
Repeater Kit
WRB-G54K
www.buffalotech.com/wireless
PY00-29010-DM20
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Additional Requirements: ◗ Desktop or Laptop PC with Wired or Wireless Ethernet adapter. ◗ DSL or Cable Modem with internet service. ◗ Web browser (I.E. or Netscape versions 4.5 or greater). ***WARNING*** Your Router/Repeater kit comes with settings preconfigured for easy setup. This includes WDS (...
3 Setting up the Router WBR-G54 ■ Note: You can use either a Wired or Wireless connection from the PC you are using to setup your router. It is strongly recommended you use the Wired method to avoid possible errors or connection issues during the initial setup. STEP 1. Connecting cables (Refer to Fi...
4 Perform the next step for Wired (Recommended) Router Setup only : ◗ Locate the provided Ethernet cable and connect one end to any one of the four numbered SWITCH ports located on the back of the router. Connect the other end of this cable to the properly installed Ethernet (NIC) port on the PC you...
