Buffalo Technology WLA-G54 - Manual
Buffalo Technology WLA-G54 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Recommeded Browsers and Updating Firmware
- Page 3 – AirStation 54Mbps Bridge; and plug the other end into the Ethernet port on; Step
- Page 5 – root; The AirStation 54Mbps Bridge configuration page will open.; Encrypt Wireless; - Click this button to configure the AirStation for advanced func-
- Page 6 – LAN or Wired MAC address
- Page 8 – Click; the “signal strength meter” icon; In OSX, you can select your wireless network in two locations:; Select; Join a specific network
- Page 9 – Choose Network
- Page 10 – Open your web browser and enter; The AirStation Web configuration page will open.
- Page 11 – Configure your TCP/IP Settings to match LAN settings
- Page 12 – support using the following information:; Online Help; Available on the AirNavigator CD enclosed with your purchase.; Web; FCC Compliance Statement -; See owners manual for complete statement.
1
®
Macintosh Quick Setup Guide
54Mbps Wireless Bridge Base Station-g
WLA-G54
Preparation
This Quick Setup Guide will guide you
through quickly and easily installing this
product on your Macintosh. For detailed
setup and configuration instructions, please
refer to the Buffalo Support Web Pages.
Package Contents:
◗
54Mbps Wireless Bridge-g
◗
Utility CD-ROM
(Software for PC only)
◗
Quick Setup Guides
◗
AC Adapter
◗
7ft. Ethernet Cable
◗
Warranty Statement
If any of the contents are missing, please
contact the reseller from which this
product was purchased.
System Requirements
◗
Macintosh Desktop or notebook with
Airport or Airport Extreme card or
third-party wireless adapter installed
◗
Existing Local Area Network to connect
to the
AirStation 54Mbps Bridge
.
There are 2 methods of configuring your
AirStation 54Mbps Bridge.
Depending on the configuration of your
computer, choose the appropriate
method to configure the
AirStation
54Mbps Bridge
.
www.buffalotech.com/wireless
MAC-WLA-G54 Rev A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Do not connect the AirStation 54Mbps Bridge to your existingnetwork until configuration of the AirStation is complete! Deciding on a Mode for Initial Connection to the AirStation Wireless Connection Wired Connection Configuration using a Web Browser Buffalo recommends using a wired connection, mea...
3 Configuring the AirStation using an Ethernet Connection Do not connect the AirStation 54Mbps Bridge to your existingnetwork until configuration of the AirStation is complete! Plug the provided 7ft. Ethernet cable into one of the 10/100M Ethernet ports on the AirStation 54Mbps Bridge and plug the o...
5 Open your web browser and enter 192.168.11.1 into the browser address field. You will be prompted to enter a UserID and Password User ID: root Password: leave blank (enter no password) NOTE: These are the factorydefault settings The AirStation 54Mbps Bridge configuration page will open. Step Confi...
