Buffalo Technology LPV3-U2 - Manual
Buffalo Technology LPV3-U2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 8 – Restart; OK’
- Page 9 – Installing the Printer
- Page 19 – Macintosh Setup; Print Server Configuration
- Page 24 – Technical Support; days a week for this product. Customers in the United States and; Technical Specifications
Unpacking and Setup
This section provides unpacking and setup information for the
USB Print Server.
Unpacking
Open the shipping carton of the USB Printer Server and carefully unpack
its contents. The carton should contain the following items:
Main unit (LPV3-U2)
1
AC adapter
1
Power cord
1
USB A-to-B cable
1
Ethernet cable
1
Installation CD
1
Manual (this user’s guide)
1
Warranty card
1
If any item is found missing or damaged, please contact your local
reseller or retailer for replacement.
User Manual
USB Print Server
LPV3-U2
www.buffalotech.com/wireless
PY00-30052-DM20-01 1-01
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
8 To view information about the USB Print Server, press the ‘ Information ’ tab. This tab will display the current information about the USB Print Server. To reset the device or to restore the factory default settings, press the ‘ Reset ’ tab. Restart : Reboots the USB Print Server Set to Factory De...
9 Open the ‘Printers and Faxes’ folder. To do so, open the ‘ Control Panel ’ and then open the ‘ Printers and Faxes ’ folder. Double click on the ‘ Add Printer ’ icon. This will open the ‘Add Printer Wizard’. Press the ‘ Next ’ button. Select ‘ Local printer attached to this computer ’. Also, unchec...
19 It is recommended that you connect the print server directly to your Apple computer using a cross over Ethernet Cable or connect the Apple computer and the print server to a hub or switch, to perform the initial configuration. The print server will attempt to obtain an IP address from a DHCP serve...
