Buffalo Technology HD-HGLAN Series - Manual
Buffalo Technology HD-HGLAN Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – LinkStation Setup; end of the power code into a power outlet. Then, connect the included
- Page 4 – Link Navigator Setup
- Page 6 – LinkStation Configuration
- Page 7 – Accessing LinkStation Data from a PC
- Page 8 – Technical Specifications
- Page 9 – Buffalo Technology
- Page 10 – MEMO
- Page 12 – products shall be returned with a copy of proof of purchase.; BUFFALO TECHNOLOGY UK LTD; Warranty Statement
Unpacking and Setup
This section provides unpacking and setup information for LinkStation.
Open the shipping carton of LinkStation and carefully unpack its contents. The
carton should contain the following items:
Main unit (LinkStation)
1
LinkStation Base Plate
1
Base Rubber Feet
4
Ethernet Cable
1
Power Cord
1
LinkNavigator Installation CD
1
Quick Setup Guide (this user’s guide)
1
Warranty card
1
If any items are missing or damaged, please contact the reseller or retailer from
which the product was purchased.
The front face of the LinkStation has a protective plastic film covering for
protection from scratching during assembly and shipping. The film can be
removed by peeling it away from any corner of the front face.
Quick Setup Guide
LinkStation
HD-HGLAN Series
www.buffalo-technology.com
PY00-31003-DM20-01 1-01
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 LinkStation Setup Plug LinkStation’s power cord into the back of LinkStation. Plug the other end of the power code into a power outlet. Then, connect the included Ethernet Cable into the Ethernet port on the back of LinkStation. Press the power button on the front of LinkStation to turn LinkStatio...
4 Insert the LinkNavigator CD into the PC’s CD-ROM drive. Depending on the PC’s configuration, the EasySetup program may launch. If it does not automatically launch, manually launch it by pressing the ‘ Start ’ menu and selecting the ‘ Run... ’ option. When the ‘Run’ dialog opens, type x:\easysetup.e...
6 The LinkStation name will be required to access LinkStation. A friendly, easy name is recommended. Enter a suitable name in the ‘ LinkStation Name ’ field. Feel free to use your first or last name, a description of the data to be installed on LinkStation, or simply name it LinkStation. Enter a short...
