Page 2 - INTRODUCTION
INTRODUCTION Thank you for purchasing the P-touch 210E! Your new P-touch will allow you to create labels for any application. Its extreme versa-tility enables you to design custom labels by choosing from different frame designs andmany character sizes and styles. In addition, the four tape widths (6...
Page 3 - NOTE; • Please read this notice carefully before starting; To insert a new tape cartridge; · REMOVE THE PAPER STOPPER
* NOTE * • Please read this notice carefully before starting To insert a new tape cartridge Cutting Tape AC Adapter connection · REMOVE THE PAPER STOPPER · USE YOUR FINGER TO TIGHTEN THE RIBBON · DO NOT PULL TAPE TO ADVANCE · USE AC ADAPTER DESIGNED EXCLUSIVELY FOR THIS UNIT · TO CUT TAPE, USE THE B...
Page 4 - CONTENTS; Getting started
CONTENTS Getting started GENERAL DESCRIPTION ................................................................. 2KEYBOARD & LCD DISPLAY ........................................................... 3GENERAL PRECAUTIONS ................................................................ 4BATTERIES .......
Page 6 - GENERAL DESCRIPTION; TOP VIEW
2 GENERAL DESCRIPTION TOP VIEW BOTTOM VIEW Tape release lever Print head Tape exit slot Batterycompartment Tape compartment AC adapter connector Back cover
Page 7 - KEYBOARD & LCD DISPLAY
3 KEYBOARD & LCD DISPLAY Z C B M . V 2 4 6 8 0 Code Caps N W R I P Y 3 Wide Clear 1 Size 9 5 Style 7 ABC E Tape ? Accent Q Length Symbol O U % T H.Ali D Å ! Œ A L Ø J F ( ) ’ , : C G ABC X S K A - O H / £ @ Print Mirror Setup Memory End Home Print Æ Repeat Number Barcode Feed uro Conversion 21O ...
Page 8 - GENERAL PRECAUTIONS
4 GENERAL PRECAUTIONS • Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. • Do not pull on the tape being fed from the P-touch. This may damage the tape cas-sette. • Do not put any foreign objects into or anything on the machine. • Do not clean the machine with...
Page 9 - BATTERIES; Alkaline batteries are recommended.; To change the batteries:
5 BATTERIES This lightweight and portable machine can be used anywhere by installing six (6) AA(AM3, LR6, SUM-3, R6) batteries. Alkaline batteries are recommended. When chang- ing the batteries, always replace all six at the same time. To change the batteries: 1 Remove the back cover by pressing in ...
Page 10 - OPTIONAL AC ADAPTER; To connect the optional AC adapter:
6 OPTIONAL AC ADAPTER The AC adapter allows you to use this machine wherever there is an electrical outlet. To connect the optional AC adapter: 1 Insert the plug on the adapter cord into the connector marked DC IN 9.5V on thebottom end of the machine. 2 Insert the plug on the adapter into the neares...
Page 11 - TAPE CASSETTE; To change the TZ tape cassette:
7 TAPE CASSETTE A single TZ tape cassette is supplied with this unit. However, since TZ tape cassettesare available for this machine in a wide variety of colours and sizes, it is possible tomake distinctive colour-coded and stylised labels. In addition, this machine has beendesigned to allow the tap...
Page 12 - ATTACHING LABELS; LAMINATED TAPE
8 ATTACHING LABELS LAMINATED TAPE The enclosed stick enables you to easily remove the backing from labels printed onlaminated tapes. 1 Hold the tape in your left hand, with the printed surface facing up, and hold thestick in your right hand. 2 Pass the tape halfway through the long narrow hole in th...
Page 16 - To clean the print head and rollers:
12 PRINT HEAD & ROLLERS Occasionally, specks of dust or dirt become attached to the machine’s print head androllers. This is particularly likely when you are using the unit outdoors or in a verydusty environment. If a section of the print head is covered with dust, a blank horizon-tal streak may...
Page 17 - CARRYING CASE
13 CARRYING CASE The enclosed hard case is designed to protect your P-touch and its accessories whileyou store or carry them. Therefore, keep them in this carrying case whenever they arenot being used. Before opening the carrying case, be sure that the side with the “brother P-touch” logofaces upwar...
Page 20 - POWER KEY; To turn on the machine:; To turn off the machine:
16 POWER KEY The power key ( ) is located in the top right-hand corner of the keyboard. If bat- teries have been installed or the machine has been plugged in using the optional ACadapter, the previous session’s information is displayed when the machine is turnedon. This feature allows you to stop wo...
Page 21 - CODE KEY
17 CODE & CAPS KEYS Most characters can be entered simply by pressing their keys. However, to use specialfunctions or to enter uppercase letters, accented characters and some symbols, the fol-lowing special keys are necessary. CODE KEY To use a function or type in characters printed in yellow ab...
Page 22 - CAPS KEY; To type uppercase letters continuously:; A B C D E F G H I J K L; A B C D E F G H I J K L
18 CAPS KEY To type uppercase letters continuously: 1 To enter Caps mode, press until the Caps indicator ( ) on the left side of the display lights up. 2 Press the desired characters. 3 To exit Caps mode, press until the Caps indicator goes off. EXAMPLE To type in “JOHN”: 1 Press once. 2 Press , , ,...
Page 23 - CURSOR KEYS; LEFT CURSOR KEY
19 CURSOR KEYS The machine’s LCD display shows two rows of 11 characters; however, the text thatyou create can be up to 99 characters long. You can review and edit your text by using the cursor keys ( , , , ) to move the cursor so that different parts are shown in the display. LEFT CURSOR KEY To mov...
Page 25 - SPACE KEY
21 SPACE KEY The space key lets you add blank spaces between characters in your text. It is different from the right cursor key ( ), which just moves the cursor without adding blank spaces. To add a space: ● Press . EXAMPLE To add a space: ● Presss . Feed Caps A A B C A A A A A Length Auto A A A A A...
Page 26 - RETURN KEY; Tape widths
22 RETURN KEY Like on a typewriter or word processor, this machine’s return key ( ) is used to end a line of text and start another one. When you have finished entering one line of text,press the return key to add a return mark ( ) to the end of the line and start a new one. ☞ A maximum of four text...
Page 27 - J o h n S m i t h _; J o h n S m i t h
23 To add a new line: 1 Press , , or to position the cursor below the character imme- diately to the right of the one that you wish to end the line. 2 Press . The return mark ( ) appears at the end of the line and the cursor moves to the new line. EXAMPLE To add a second line: ● Press . Home End Mem...
Page 28 - To apply a selected item:; H i g h b u r y , L
24 To apply a selected item: ● Press once. EXAMPLE To add “ ” to your text: ● Hold down and press . Press “D”. ● Use cursor right to move to “ ”. ● Press once. Memory Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC ✏ Code Caps Symbol Caps A A B C A A A A A Length Auto A A A A A Wide ABC AB...
Page 29 - DELETE KEY; To delete one character:
25 DELETE KEY The delete key ( ) allows you to remove characters to the left of the cursor’s current position. It differs from the left cursor key ( ), which only moves the cursor without deleting any characters. The delete key can also be used to quit most functions and return to the previous dis-p...
Page 30 - To quit a function without changing your text:
26 To quit a function without changing your text: ● Press to return to your text. EXAMPLE 1 Press once. To delete “-678”: 2 Hold down until “-678” are deleted. To quit the Symbol function without adding a symbol to your text: ● Press . Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC 1: 1 2...
Page 31 - CLEAR FUNCTION; To delete all of the text:
27 CLEAR FUNCTION The Clear function is used to remove all characters from the display so that you canbegin entering new text. Although all of the text is erased, the Caps mode and thecharacter format settings (Size, Wide, Style, and the Underline and Frame functions)do not change. To delete all of ...
Page 32 - COMPOSITE CHARACTER KEYS; To type in a composite character:
28 COMPOSITE CHARACTER KEYS When writing in other languages, composite characters, which consist of a letter and adiacritical mark, are often used. This machine can also display and print these charac-ters. The diacritical marks available are ¨, ´, `, ˆ and ˜. The following diacritical mark and lett...
Page 34 - ACCENT FUNCTION; To type in an accented character:
30 ACCENT FUNCTION The Accent function can also be used to add accented characters to your text. Theaccented characters are grouped according to the uppercase or lowercase letter thatthey are combined with. The following accented characters are available: ☞ Some of these composite characters can als...
Page 35 - A C C E N T; ë é è ê e e; ë é è ê
31 4 Press . The accented character is added to the text. ☞ To type in a sequence of accented characters, hold down before pressing . Continue adding accented characters to your text by select- ing them, then holding down while pressing . Press just after the last character in the sequence is chosen...
Page 36 - Ë É È Ê E E; Ë É È Ê
32 To add the accented character “É”: 1 Hold down and press . 2 Hold down and press . 3 Press until “É” flashes. 4 Press . Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC a - z / A - Z ? A C C E N T Code ? Accent Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC 1: R E S U M _ Ë É ...
Page 37 - SYMBOL FUNCTION; Group
33 SYMBOL FUNCTION In addition to the letters, symbols and numerals on the key tops, there are 50 addi-tional characters available with the Symbol function. These symbols are divided intofive groups, corresponding to the letters A through F. The following symbols are available: To type in a symbol: ...
Page 38 - S Y M B O L
34 EXAMPLE To add the symbol “ ”: 1 Hold down and press . 2 Press . 3 Press until “ ” flashes. 4 Press . Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC S E L E C T A - F ? S Y M B O L Code Caps Symbol Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC ✏ D Å Caps A A B C A A A A A L...
Page 39 - CURRENCY CONVERSION FUNCTION; SETTING UP THE CURRENCY CONVERSION FUNCTION
35 CURRENCY CONVERSION FUNCTION By simply setting up the Currency conversion function once, you can quickly and easilyconvert one currency into another, add the two values to your text, and then print out thelabel in the format that you have selected. SETTING UP THE CURRENCY CONVERSION FUNCTION Gene...
Page 40 - To set up the first currency:
36 To set up the first currency: 1 Hold down and press . “1ST CURRENCY” is displayed. ☞ To quit the Currency conversion function without changing any parame- ters, hold down and press . To skip to the second currency setup, press or until “2ND CURRENCY” is displayed, and then continue with step A . ...
Page 43 - To set up the second currency:
39 8 Press (or ). The message “NEXT?” is displayed. 9 Press or to select either “YES” (to continue the setup) or “NO” (to exit the setup). ☞ In order to convert currencies automatically, two currencies must be setup. 0 Press . ☞ If “YES” was selected, “2ND CURRENCY” is displayed. If “NO” wasselected...
Page 44 - To set up the print layout:
40 D Repeat steps 5 through 9 until all parameters for the second currency are set as you wish. E Press . ☞ If “YES” was selected, “PRINT SETUP” is displayed. If “NO” was selected,“EXIT SETUP” is displayed. To set up the print layout: F With “PRINT SETUP” displayed, press (or ). “CURRENCY” is dis- p...
Page 46 - USING THE CURRENCY CONVERSION FUNCTION; To convert currencies:
42 USING THE CURRENCY CONVERSION FUNCTION To convert currencies: 1 Press . The two setup currencies are displayed. 2 Type in the value that you wish to convert. ☞ Up to 10 digits can be entered. To change the direction for calculating the currencies, press or so that the arrow points in the desired ...
Page 47 - C U R R E N C Y; E U R O; L A Y O U T
43 EXAMPLE To set up the Currency conversion function to convert between euros and deutsche-mark: ☞ This example will work exactly as described only if none of the settings in theCurrency conversion function have been changed yet. 1 Hold down and press . 2 Press (or ). 3 Since “EURO” is already sele...
Page 48 - D I V I D E R; Y E S
44 5 Since “.” is already selected, press (or ). 6 Since “,” is already selected, press (or ). 7 Since “YES” is already selected, press . 8 Press (or ). Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC , D I V I D E R Memory Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC Y E S N ...
Page 49 - D E M
45 9 Press or until “DEM” is selected. 0 Press (or ). A Since the default layout for the deutsche- mark is already selected, press (or ) twice. B Press or until “,” is selected. Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC D E M C U R R E N C Y Home End Caps A A B C A A A A A Length Aut...
Page 50 - S P A C E
46 C Press (or ). D Press or until “SPACE” is selected. E Press (or ). Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC , D I V I D E R Memory Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC S P A C E D I V I D E R Home End Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC...
Page 51 - S E T U P; S E P A R A T O R
47 F Since “YES” is already selected, press . G Press (or ). H Since both the first and second cur-rencies are already set to “Y”, press (or ) . Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC S E T U P P R I N T Memory Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC 1 S T : Y 2 ...
Page 53 - P R I N T E R; E U R O D E M; E U R O D E M
49 EXAMPLE To make a price tag using the Currency conversion function to convert from deutsche-mark to euros: 1 Type “PRINTER”, then press . 2 Press . 3 Press so that “ → ” changes to “ ← ”. 4 Type “199.95”. 5 Press . A A B C A A A A A Length Auto A A A A A Wide ABC ABC Caps 2: _ 1: P R I N T E R Me...
Page 54 - R O U N D
50 6 Keep held down and continue pressing until “ROUND” is displayed. 7 Press . A A B C A A A A A Length Auto A A A A A Wide ABC ABC Caps R O U N D F R A M E Code 9 ABC Print Mirror Print
Page 55 - LENGTH FUNCTION; To change the Length setting:
51 LENGTH FUNCTION Although the length of the printed label automatically adjusts to fit the length of theentered text, there may be times when you will want to make a label with a specificlength. With this function, various settings are available which allow you to set thelabel length between 5.0 c...
Page 56 - O N; L E N G T H c m; L E N G T H c m
52 EXAMPLE To select a label length of 10.2 cm: 1 Hold down and press once. 2 Keep held down and continue pressing until “ON” is displayed. 3 Release . 4 Press until setting 10.2 is displayed. 5 Press . Code Q Length Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC Caps A A B C A A A A A Le...
Page 57 - SIZE & WIDE FUNCTIONS; Size settings
53 SIZE & WIDE FUNCTIONS The character size can be adjusted using both the Size and Wide functions. All charac-ters in the text will be printed in the selected character size. With the AUTO Size setting, the machine compares your text with the width of theinstalled tape and automatically adjusts...
Page 58 - To change the Size setting:; A U T O; S I Z E
54 To change the Size setting: 1 Hold down and press once. The currently selected Size setting appears in the display. ☞ The indicators above the display also show the current Size setting. 2 Keep held down and continue pressing until the desired setting appears in the display and is shown by the in...
Page 59 - To change the Wide setting:; O F F
55 To change the Wide setting: 1 Hold down and press once. The currently selected Wide setting appears in the display. 2 Keep held down and continue pressing until the desired setting appears in the display. 3 Release to apply the selected Wide setting to all of the characters in the text. ☞ The Wid...
Page 60 - STYLE FUNCTION
56 STYLE FUNCTION You can choose to apply one of nine different character styles to create a more decora-tive label. The following Style settings are available: The default Style setting is NORMAL. The currently selected Style setting is alwaysshown by the indicators below the display. ☞ Characters ...
Page 61 - To change the Style setting:; N O R M A L; B O L D
57 To change the Style setting: 1 Hold down and press once. The currently selected Style setting appears in the display. 2 Keep held down and continue pressing until the desired setting appears in the display. 3 Release to apply the selected Style setting to all of the characters in the text. ☞ The ...
Page 62 - UNDERLINE FUNCTION; To change the Underline setting:
58 UNDERLINE FUNCTION You can underline your entire text in order to emphasise it. The following Underline settings are available: OFF ON The default Underline setting is OFF. If ON is selected, the Underline indicator ( ABC )on the right side of the display lights up. ☞ If a frame has been chosen w...
Page 64 - FRAME FUNCTION; To change the Frame setting:
60 FRAME FUNCTION With the Frame function, you can choose from various frames and highlights for deco-rating your label. The following Frame settings are available: The default Frame setting is OFF. If any setting other than OFF is selected, the Frameindicator ( ) on the right side of the display li...
Page 65 - N A M E P L A T E
61 EXAMPLE To select the NAMEPLATE Frame setting: 1 Hold down and press once. 2 Keep held down and continue pressing until the NAMEPLATE Frame setting is displayed. 3 Release . Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC O F F F R A M E Code 9 ABC Caps A A B C A A A A A Length Auto A A...
Page 66 - TAPE FEED FUNCTION
62 TAPE FEED FUNCTION The Tape feed function allows you to adjust the size of the blank spaces on the left andright sides of your text. In addition, the NONE Tape feed setting can be used to printone label with many different format styles. The following Tape feed settings are available: The default...
Page 67 - To change the Tape feed setting:; C O P I E S; PostScript e; N O N E
63 To change the Tape feed setting: 1 Hold down and press once. The currently selected Tape feed setting appears in the display. 2 Keep held down and continue pressing until the desired setting appears in the display. 3 Release to apply the selected Tape feed setting to the entire text. EXAMPLE To m...
Page 69 - F E E D
65 0 Press . A Hold down and press . B Press in the tape cutter lever to cut the tape. Print Mirror Print Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC 1: M a n a g e r _ C O P I E S 1 / 1 C O P I E S Caps A A B C A A A A A Length...
Page 70 - HORIZONTAL ALIGNMENT FUNCTION; To change the Horizontal alignment setting:; LEFT
66 HORIZONTAL ALIGNMENT FUNCTION You can choose to align the characters in the text in one of three ways. In addition, ifthe Length function was used to set the length of the label, the text will align within thelabel according to the selected Horizontal alignment setting. The following Horizontal a...
Page 71 - L E F T; R I G H T
67 EXAMPLE To select the RIGHT Horizontal alignment setting: 1 Hold down and press once. 2 Keep held down and continue pressing until the RIGHT Horizontal alignment setting is displayed. 3 Release . Code T H.Ali Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC L E F T H . A L I Caps A A B C...
Page 72 - MIRROR PRINTING FUNCTION; To change the Mirror printing setting:
68 MIRROR PRINTING FUNCTION With this function, you can print your text so that the characters can be read from theadhesive side of the tape. If mirror-printed labels are attached to glass, such as a showroomwindow or some other clear material, the text can be read correctly from the opposite side. ...
Page 73 - BAR CODE FUNCTION; PARAMETER
69 BAR CODE FUNCTION The Bar code function, which enables bar codes to be printed as part of labels, is oneof this machine’s most advanced features. ☞ This section will explain how to enter a bar code into your text. It is notintended as a comprehensive introduction to the concept of bar coding. For...
Page 75 - To delete the bar code from your text:; C O D E 3 9
71 To delete the bar code from your text: 1 Press , , or until the cursor is positioned either below the right bar code mark or immediately to the right of the second bar code mark. 2 Press . The message “OK TO CLEAR? ”. 3 Press . EXAMPLE To create a bar code: 1 Hold down and press . 2 Press . 3 Pre...
Page 76 - C L E A R
72 5 Press . 6 Press , , , , then . 7 Press . Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC ✱ _ ✱ C O D E 3 9 Memory Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC ✱ 1 2 3 4 5 F ✱ _ C O D E 3 9 1 Size 2 3 Wide 4 5 Style Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC...
Page 77 - PRINT KEY & FEED FUNCTION
73 PRINT KEY & FEED FUNCTION After you have entered your text and chosen the desired format settings, you are readyto print the label. To print a label: ● Press . The message “COPIES 1/1” is displayed while the label is printed. The label comes out of the tape exit slot in the top end of the mac...
Page 78 - NUMBERING FUNCTION; To use the Numbering function:; S T U D I O 1
74 NUMBERING FUNCTION This function can be used to print many copies of the same text while increasing a cer-tain number in the text by 1 after each label is printed. To use the Numbering function: 1 Press , , or to position the cursor below the number that you wish to increase. 2 Hold down and pres...
Page 79 - N U M B E R; U N T I L 3
75 2 Hold down and press . 3 Press . 4 Press (or ). 5 Press in the tape cutter lever to cut the tape, then use scissors to cut along the printeddots to separate the labels. Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC U N T I L 1 - 9 ? N U M B E R Code V Number Caps A A B C A A A A A Le...
Page 80 - REPEAT PRINTING FUNCTION; To use the Repeat printing function:
76 REPEAT PRINTING FUNCTION This function allows you to print up to 9 copies of the same text. To use the Repeat printing function: 1 Hold down and press . The message “COPIES UNTIL 1–9?” appears in the display. 2 Press the number key ( to ) of the number of labels that you want. ☞ To quit the Repea...
Page 82 - MEMORY FUNCTIONS; STORING TEXT; To store a text file:
78 MEMORY FUNCTIONS You can use the memory to store your most frequently used text files. The text remainsin the memory, even after all characters are removed from the display using the Clear function (holding down and pressing ). When each file is stored, it is given a number to make recalling it e...
Page 83 - To overwrite the stored file with the new one:; RECALLING TEXT; To recall a text file:; DELETING A FILE; To delete a text file:
79 To overwrite the stored file with the new one: ● Press to delete the previously stored file and store the new one under the selected number. ☞ To go back and choose another file number without overwriting the text file, press , then press the number key of a different file number. RECALLING TEXT ...
Page 84 - S T O R E
80 3 Press . The message “CLEAR SELECT 1–9?” appears on the display. 4 Press the number key ( to ) of the file number containing the text that you wish to delete. The text stored under the selected file number is shown. ☞ To see other parts of the selected text file, press or . To display the text s...
Page 85 - R E C A L L
81 3 Press . To recall the text from file number 4: 1 Hold down and press . 2 Press until “RECALL” flashes on the display. 3 Press . 4 Press . 5 Press . Caps A A B C A A A A A Length Auto A A A A A Wide ABC ABC 1: C O D E _ C L E A R 8 Screen 104??? Caps A A B C A A A A A Length Auto A A A A A Wide ...
Page 87 - TROUBLESHOOTING; Problem
83 TROUBLESHOOTING Problem Remedy 1. The display stays blank after you have turned on the machine. • Check that the AC adapter is con- nected correctly.Ensure the correct AC adapter is used. • If you are using alkaline batteries, check that they are correctly inserted. • If the batteries are low, re...
Page 88 - ERROR MESSAGE LIST; Error
84 ERROR MESSAGE LIST Error Message Cause Remedy 1 BARLIMIT! • This message appears if a bar code already exists when you hold down and press . • Limit the number of bar codes in the text to one. 4 DIGITMIN. • This message appears when less than the minimum four digits are entered when making a bar ...
Page 92 - SPECIFICATIONS; HARDWARE
88 SPECIFICATIONS HARDWARE SOFTWARE Input device: Keyboard with 52 keys LCD: 7 × 5 dots 12 characters 2 line17 indicators Print tape: Pressure-sensitive, adhesive-based8 m longFour widths available: 6 mm9 mm12 mm18 mm Power supply: Six AA alkaline batteries (AM3, LR6) or optional AC adapterAuto powe...
Page 93 - ACCESSORIES; Supplies
89 ACCESSORIES ● Supplies Obtain tape cassettes and AC adapters from your nearest authorised dealer. Brothercannot be held responsible for trouble caused by the use of unauthorised supplies.Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. Stock no. Description...
Page 94 - Description
90 TZ-B31 Black characters on fluorescent orange adhesive TZ-C31 Black characters on fluorescent yellow adhesive TZ-D31 Black characters on fluorescent green adhesive TZ-M31 Black characters on clear (mat) adhesive 9 mm laminated tapes TZ-121 Black characters on clear adhesive TZ-122 Red characters ...
Page 96 - Quick guide; To set up the Currency conversion function:
Quick guide To set up the Currency conversion function: 1 Hold down and press . 2 With "1ST CURRENCY" displayed, press (or ). 3 Press or to select the first currency, and then press (or ) . 4 Press or to select the currency layout, and then press (or ). 5 If "___XXX.XX___" was select...
