Page 2 - INTRODUCTION; Stamp; function, you can quickly and; FCC NOTICE
INTRODUCTION Thank you for purchasing the P-touch 2400/2410!Your new P-touch will allow you to create labels and stamps for any need. Its versatilityenables you to design custom labels by choosing from a variety of frame designs and frommany characters sizes and styles. In addition, the five tape wi...
Page 3 - CONTENTS; Getting Started
I CONTENTS Getting Started GENERAL DESCRIPTION .................................................................................... 2 GENERAL PRECAUTIONS ................................................................................... 4 BATTERIES .....................................................
Page 6 - GENERAL DESCRIPTION; TOP VIEW; LCD display
2 GENERAL DESCRIPTION TOP VIEW BOTTOM VIEW Tape compartmentcover LCD display Keyboard AC adaptorconnector Interfaceconnector Tape exit slot Battery compartment cover
Page 7 - KEYBOARD & LCD DISPLAY; Power key
3 KEYBOARD & LCD DISPLAY ¡ ¿ é ú " Ç ç Ñ ñ - ' ü í ó á Alt Tab Caps Font Size Width Style Underline Frame Line out Clear Symbol Accent Tab Length Tape Align Length A.Format Stamp Home End Store Recall M.Del Mirror Memory Off Space A S D F G H J K L : ; Z X C V B N M Shift / , ? . Q W E R T Y...
Page 8 - GENERAL PRECAUTIONS; dashboard or in the back of your car.; • Use eight AA alkaline batteries in this machine.
4 GENERAL PRECAUTIONS • Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. • Do not pull on the tape being fed from the P-touch. This may damage the tape cassette.• Do not use the machine in dusty places, and keep it out of both direct sunlight and rain.• Do not...
Page 9 - BATTERIES; line batteries; To change the batteries:; Remove the battery compartment cover on the back of the machine.
5 BATTERIES This lightweight and portable machine can be used anywhere by installing eight (8) AA alka- line batteries . When you change the batteries, always replace all eight at the same time. To change the batteries: 1 Remove the battery compartment cover on the back of the machine. 2 If batterie...
Page 10 - OPTIONAL AC ADAPTOR; To connect the optional AC adaptor:
6 OPTIONAL AC ADAPTOR The AC adaptor (model AD-60) allows you to use this machine wherever there is an electricaloutlet. To connect the optional AC adaptor: 1 Insert the plug on the adaptor cord into the connector marked DC IN 9.5V on the rightside of the machine. 2 Insert the plug on the adaptor in...
Page 11 - CONNECTING THE P-TOUCH TO A COMPUTER
7 CONNECTING THE P-TOUCH TO A COMPUTER This machine is equipped with an interface connector, allowing you to print labels and stampsthat you have created with the P-touch Editor software installed on your IBM PC-compatiblecomputer or Macintosh. To connect the P-touch to the computer: 1 Turn off both...
Page 12 - INSTALLING P-TOUCH EDITOR; Hard disk free space:
8 INSTALLING P-TOUCH EDITOR Installing the P-touch Editor software and printer driver add even more illustration and layoutfeatures to the label-making possibilities available with your PT-2400/2410. To install P-touch Editor and the printer driver on an IBM PC-compatible computer: 1 Check that your...
Page 17 - In the next dialog box that has appeared, click the Restart button.
13 Printer (serial) port: 8-pin connector jackCD-ROM drive 2 Connect the PT-2400/2410 to the computer’s printer port and turn on both the PT-2400/2410 and the computer. 3 Insert the P-touch Editor CD-ROM into the computer’s CD-ROM drive and double-clickthe CD-ROM icon. ☞ The installers for the P-tou...
Page 19 - STARTING UP P-TOUCH EDITOR; Click the Start button in the taskbar to display the Start menu.; Start up Windows Explorer.
15 STARTING UP P-TOUCH EDITOR The P-touch Editor application makes it easy for anyone to design and print labels for almostany need imaginable. To start up P-touch Editor on an IBM PC-compatible computer: By clicking the P-touch Editor icon:• Double-click the P-touch Editor 3 icon in the P-touch Edi...
Page 20 - To start up P-touch Editor on a Macintosh computer:; After P-touch Editor is started, the following window is displayed.
16 To start up P-touch Editor on a Macintosh computer: • Double-click the P-touch Editor Ver3.0 icon in the “P-touch Editor Ver3.0” folder installed on the computer. After P-touch Editor is started, the following window is displayed. Menu bar Draw toolbar Print toolbar Database toolbar Layout Area R...
Page 21 - DESIGNING AN AUTO FORMAT LAYOUT; To design a layout on an IBM PC-compatible computer:
17 DESIGNING AN AUTO FORMAT LAYOUT In addition to allowing you to draw pictures and arrange text using any of the available fonts,sizes, and styles, P-touch Editor comes with a variety of pre-formatted templates, which makecreating label layouts quick and easy. Now let’s see how simple it is to crea...
Page 22 - Click the Next button.; To design a layout on a Macintosh computer:
18 9 Click the Next button. 0 In the Auto Format Wizard (4/4) dialog box,click the desired options. A Click the Finish button. A new layout docu-ment containing the pre-formatted textappears in the layout area. To design a layout on a Macintosh computer: 1 On the File menu, click Auto Format com-man...
Page 24 - IMPORTING A GRAPHICS FILE; To import a graphics file:
20 IMPORTING A GRAPHICS FILE With the P-touch Editor application, you can also import image files in a variety of formats(.bmp, .dib, .jpg, .gif, .tif, .ico, and .wmf on the PC or PICT, JPEG, TIFF and BMP on the Mac)into your layout. To import a graphics file: 1 With a layout document displayed, sel...
Page 25 - READING THE USER’S GUIDE; To install Internet Explorer 4.01 on an IBM PC-compatible computer:; Click the Start button on the taskbar to display the Start menu.
21 READING THE USER’S GUIDE The P-touch Editor User’s Guide can be read either by inserting the CD-ROM into the driveeach time you wish to refer to it or by installing it onto your hard disk so that it is quickly avail-able at any time. Since the User’s Guide is an HTML document, a browser is needed...
Page 26 - To read the P-touch Editor User’s Guide on a Macintosh computer:
22 To read the P-touch Editor User’s Guide on a Macintosh computer: 1 If the User’s Guide was not installed onto the computer’s hard disk, insert the P-touch Edi-tor CD-ROM into the CD-ROM drive. 2 Double-click Main.htm in the User’s Guide folder of the CD-ROM’s P-touch folder (if theUser’s Guide is...
Page 27 - TAPE CASSETTE; To change the tape cassette:; Close the compartment cover, then turn on the machine if it is off.
23 TAPE CASSETTE A single TZ tape cassette is supplied with this unit. However, since TZ tape cassettes are avail-able for this machine in a wide variety of colors and sizes, it is possible to make distinctivecolor-coded and stylized labels. In addition, this machine has been designed to allow you t...
Page 28 - ATTACHING LABELS; LAMINATED TAPE; Pass the tape halfway through the long narrow hole in the stick.; FABRIC TAPE; The label will have a white background on colored cloth.; STAMP TAPE
24 ATTACHING LABELS LAMINATED TAPE The enclosed stick enables you to easily remove the backing from labels printed on laminatedtapes. 1 Hold the tape in your left hand, with the printed surface facing up, and hold the stick inyour right hand. 2 Pass the tape halfway through the long narrow hole in t...
Page 29 - To clean the print head and rollers:
25 PRINT HEAD & ROLLERS Occasionally, specks of dust or dirt become attached to the machine’s print head and rollers.This is particularly likely when you are using the unit outdoors or in a very dusty environment.If a section of the print head is covered with dust, a blank horizontal streak may ...
Page 32 - DOOR LABEL EXAMPLE; Getting; To turn on the machine:; A B C D E F G H I J K L
28 DOOR LABEL EXAMPLE After you have inserted the batteries and the enclosed tape cassette as explained in the Getting Started chapter, let’s practice using some of the basic functions of your P-touch. We must firstbegin by turning on the power to the machine. The underline in the LCD display is cal...
Page 33 - ENTERING THE TEXT; type capital letters continuously without holding down; Also like on a typewriter or computer keyboard, the Space key (; blank spaces to the text.; To type in “MEETING”:
29 ENTERING THE TEXT Since all of the text will be in capital letters, we will use the Caps mode, which allows us to type capital letters continuously without holding down . Then, let’s type in the text in the same way that you would type on a typewriter or a computerkeyboard. Also like on a typewri...
Page 34 - E T I N G R O O M _
30 Type the second word, “ROOM”, to finish the text. Now that we are finished entering capital letters, we can exit Caps mode. Once you have entered the text, you can easily edit it by correcting mistakes or simply adjust-ing it or its format. For more detailed explanations of text editing methods, ...
Page 35 - PRINTING THE TEXT; To print the door label:
31 PRINTING THE TEXT Several format settings are available, however, in this example we will use the default settingspre-programmed into the machine and print out our label, which is then automatically cut offafter printing is finished. To print the door label: 7 Press once. The message “WORKING” ap...
Page 36 - ADDRESS LABEL EXAMPLE; To erase all of the text and reset the format functions:
32 ADDRESS LABEL EXAMPLE While making the multi-line address label in this example, we will learn how to create moredecorative labels using the various format settings. ☞ Five-line labels, such as this address label, can only be printed on either 3/4” (18-mm)-or 1” (24-mm)-wide tape. Before entering...
Page 37 - Let’s begin by typing in the first row of text, the name “Bill Reynolds”.; To type in “Bill Reynolds”:; To end the first line and begin another one:; O K T O
33 ENTERING THE TEXT Let’s begin by typing in the first row of text, the name “Bill Reynolds”. In a multi-line label, the return key ( ) is used to end one line and start the next one. The return mark ( ) indicates the end of the line. To type in “Bill Reynolds”: 3 Hold down and press once, then rel...
Page 38 - A B C T r a n s p o
34 Now, we can enter the company name, address, and telephone number: ABC Transport; 29South Main St.; Los Angeles, CA 88888; 012-345-6789. To type in the company name, address, and telephone number: 7 Type “ABC Transport”, and then press . 8 Type “29 South Main St.”, and then press . 9 Type “Los An...
Page 39 - FORMATTING THE TEXT; To select the BRUSSELS font setting:; O F F; R O U N D
35 FORMATTING THE TEXT Now the text is entered as we wish. If it were printed, the standard default settings would beused. The text would be aligned on the left side with 1” (25 mm) margins and would not beframed or underlined. In addition, the characters would be auto-sized (AUTO) and printedusing ...
Page 40 - If we want only one copy of the text, we could just press; To select the NONE tape margin setting:
36 Different format settings can be chosen either before or after the text is entered. The procedureshown above can also be used to change the other format settings. PRINTING THE TEXT If we want only one copy of the text, we could just press to print it. However, let’s assume that we have three lett...
Page 42 - STORAGE SHELF LABEL EXAMPLE; To clear the working area for a new label:
38 STORAGE SHELF LABEL EXAMPLE In this final example, we will practice using the New block function and the Local formatfunction as well as more specialized features such as the Barcode and Numbering functions.The following labels, which could be used to describe objects stored on a shelf, contain m...
Page 43 - Now, we can begin entering the text for our storage shelf label.; For more details on the New block function, refer to; NEW BLOCK FUNCTION on page 54.; To create a new block of text:
39 ENTERING THE TEXT Now, we can begin entering the text for our storage shelf label. Each time the number of lines in a section of the text changes, a new block of text must be cre-ated. Therefore, the text for our label must be entered in three separate blocks.Since we will now change from a one-l...
Page 44 - 9 S o u t h M a; L o s A n g e l e s; C O D E 3 9
40 Now, we must enter the third block of the text: the barcode. Although there are many barcodetypes available, let’s use CODE 39, which can use an unrestricted number of digits. Moredetails on the Barcode function can be found on pages 97 through 100. 6 Type “29 South Main St.”, then press . 7 Type...
Page 45 - To enter the barcode data:
41 If we wished to use a different type or change any of the default barcode settings, we couldpress , and then use the cursor keys to change the parameter settings. However, since we will use the default settings for this example, we can immediately input our barcode data. FORMATTING THE TEXT Now t...
Page 46 - NUMBERING FUNCTION on pages 103; To select the SOLID style setting for the first block:; B L O C K F O R M A T
42 PRINTING THE TEXT Finally, let’s assume that we want to put labels on two different shelves (B1 and B2) whilekeeping the same barcode. To do this, we can use the Numbering function to print two copiesof our text while automatically increasing the shelf number after each label is printed. Formore ...
Page 47 - S E T S T A R T P T; I N C R E A S E S
43 F Press until “1” is flashing. G Press . H Since we only want “1” in the numbering field, press again. I Press once. ☞ The number can be entered either bytyping it in using the number keys orby selecting it using and . 1: B 1 S E T S T A R T P T Alt Caps Width Length A.Format Undl/Frm Length 1: B...
Page 50 - POWER KEY; To turn off the machine:
46 POWER KEY The power key ( ) is located in the top right-hand corner of the keyboard. If batteries have been installed or the machine has been plugged in using the optional AC adaptor, theprevious session’s information is displayed when the machine is turned on. This feature allowsyou to stop work...
Page 51 - CURSOR KEYS; LEFT CURSOR KEY
47 CURSOR KEYS The machine’s LCD display shows two rows of 11 characters; however, the text that you entercan be up to 255 characters long. You can review and edit your text by using the cursor keysto move the cursor so that different parts are shown in the display. LEFT CURSOR KEY To move the curso...
Page 53 - CODE KEY; To use a function printed above a key:; EXAMPLE
49 CODE, ALT & SHIFT KEYS Most characters can be entered simply by pressing their keys. However, to use special func-tions or to enter capital letters, accented characters and some symbols, the following specialkeys are necessary. CODE KEY To use a function printed above a key: ● Hold down and p...
Page 54 - ALT KEY
50 ALT KEY To type in characters printed in color on the right-hand side of the keys: ● Hold down and press the key of the desired character. The Alt indicator on the left side of the display lights up while is held down. ☞ To type in the capital letter of a character written in color, hold down (or...
Page 55 - SHIFT KEY; CAPS MODE; To type in many capital letters:
51 SHIFT KEY To type in a capital letter or a symbol printed in the upper-left corner of a key: ● Hold down and press the key of the desired letter or symbol. EXAMPLE CAPS MODE The Caps mode allows you to type capital letters continuously without holding down . To type in many capital letters: 1 Hol...
Page 56 - SPACE KEY; ent from the right cursor key (
52 SPACE KEY The Space key ( ) lets you add blank spaces between characters in your text. It is differ- ent from the right cursor key ( ), which just moves the cursor without adding blank spaces.To add a space: ● Press . EXAMPLE To add a space: ● Press . Space Feed&Cut Space Space Feed&Cut S...
Page 57 - RETURN KEY; To select an item from a list:
53 RETURN KEY Like on a typewriter or word processor, this machine’s return key ( ) is used to end a line of text and start another one. When you have finished entering one line, press the returnkey to make a new line and move the cursor to it. ☞ Each block can only contain a maximum of seven text l...
Page 58 - NEW BLOCK FUNCTION; K ’ s G a r d e n _; K ’ s G a r d e n
54 NEW BLOCK FUNCTION Whenever the number of lines in a section of the text changes, a new block must be created. ☞ A single label can only contain a maximum of five blocks. If the cursor is located in the fifth block when is held down and is pressed, the error message “5 BLOCK LIMIT!” appears. If t...
Page 59 - TAB FUNCTION; To set the tab length:; J K L M N O P Q R S T U
55 TAB FUNCTION This function allows you to separate sections of a line of text by adding tabs. This enables youto create perfectly aligned columns without having to type in several spaces. All tabs have thesame length and are measured from either the beginning of the line or the previous tab if the...
Page 60 - the label shown below will be printed.; J K L M N O P Q R S T U
56 the label shown below will be printed. EXAMPLE To set the tab length: 1 Hold down and press once. 2 Press until 1.0inch is displayed. 3 Press . To add a tab: ● Hold down and press once. J K L M N O P Q R S T U A B C D E F G H I Margin Tab (2” (5 cm)) Tab (2” (5 cm)) Margin Alt Caps T A B L E N G ...
Page 61 - DELETE KEY; To delete one character:
57 DELETE KEY The delete key ( ) allows you to remove characters to the left of the cursor’s current posi- tion. It differs from the left cursor key ( ), which only moves the cursor without deleting any characters.The delete key can also be used to quit most functions and return to the previous disp...
Page 62 - LINE OUT FUNCTION; To delete a line of text:; s G a r d e n
58 LINE OUT FUNCTION With the Line Out function, you can easily remove an entire line of text. To delete a line of text: 1 Press , , or to position the cursor within the line of text that you wish to delete. 2 Hold down and press once. ☞ Each time is pressed while is held down, the line of text cont...
Page 63 - CLEAR FUNCTION
59 CLEAR FUNCTION When clearing the display before entering new text, the Clear function can be used to choosewhether all of the text is erased and all format functions (Font, Size, Width, Style, Underline,Frame, Tape margin, Alignment, Tab length, Mirror printing, and Length) are returned to theird...
Page 66 - ACCENT FUNCTION; To type in an accented character:
62 ACCENT FUNCTION The Accent function can also be used to add accented characters to your text. Many of these characters can also be found on the keys and typed in using (refer to page 50) or they can be entered using the Symbol function (refer to pages 64 and 65).The accented characters are groupe...
Page 67 - A C C E N T
63 EXAMPLE To add the accented character “É”: 1 Hold down and press . 2 Hold down and press . 3 Press until É flashes. 4 Press . a - y / A - U ? A C C E N T Alt Caps Width Length A.Format Undl/Frm Length Code Code Accent A Accent A 1: R E S U M _ Alt Caps Width Length A.Format Undl/Frm Length È É Ë ...
Page 68 - SYMBOL FUNCTION; Group; Ü Æ æ
64 SYMBOL FUNCTION In addition to the letters, symbols and numerals on the key tops, there are 67 additional marksavailable with the Symbol function.The following symbols are available: ☞ The use of certain symbols contained within this labelling machine may be governed bylocal, national or European...
Page 70 - AUTO FORMAT FUNCTION; To enter text in the layout:
66 AUTO FORMAT FUNCTION The Auto format function makes creating labels quick and easy. After simply selecting one ofthe various pre-formatted layouts and typing text into each of its fields, the overall style of thelabel can easily be changed by selecting one of the seven available style formats, an...
Page 71 - P R E S S
67 B Press . The first field for the selected layout appears in the display. C Repeat step 4 until the text is edited as you wish. The SELECT MENU appears again when is pressed after editing the last field in the layout. To finish using the Auto format function: D Press or until the EXIT command is ...
Page 72 - To change the character style of the label:
68 To change the character style of the label: 5 Press or until CHANGE STYLE is displayed. 6 Press . 7 Press or until ELEGANT is displayed. 8 Press . To print the label: 9 Press . Alt Caps S E L E C T M E N UC H N A G E S T Y L E Width Length A.Format Undl/Frm Length Home End Alt Caps C H A R . S T ...
Page 73 - NAME PLATE
69 REFERENCE No. Layout name Tape width × label length Layout fields 1 VCR VHS-1 3/4” × 5.5” (18 mm × 140 mm) 1 1 SYMBOL? 4 4 DURATION? 2 2 TITLE? 5 5 REC.MODE? 3 3 SUBTITLE? 6 6 DATE? 2 VCR VHS-2 1” × 3.0” (24 mm × 77 mm) 1 1 TITLE? 3 3 DATE? 2 2 SUBTITLE? 3 VCR 8mm-1 3/8” × 2.9” (9 mm × 73 mm) 1 1...
Page 75 - ” FLO PPY; Layout name
71 1 VCR VHS-1 2 VCR VHS-2 3 VCR 8mm-1 4 VCR 8mm-2 5 VCR VHSC-1 6 VCR VHSC-2 7 AUDIO-1 8 AUDIO-2 37 3.5” FLOPPY 1” × 2.7” (24 mm × 69 mm) 1 1 TITLE? 3 3 NAME? 2 2 SUBTITLE? 38 3/4” × 2.7” (18 mm × 69 mm) 39 5” FLO PPY 1” × 3.1” (24 mm × 79 mm) 1 1 TITLE? 3 3 NAME? 2 2 SUBTITLE? 40 3/4” × 3.1” (18 mm...
Page 79 - REFERENCE
75 REFERENCE CHAR. STYLE Setting Sample Font Setting Style Setting ORIGINAL Layout default ITALIC Layout default ITALIC DYNAMIC ISTANBUL SOLID CUTE FLORIDA OUTLINE FORMAL BRUSSELS ITALIC ELEGANT US NORMAL NATURAL SAN DIEGO NORMAL
Page 80 - STAMP FUNCTION; S T A M P
76 STAMP FUNCTION The Stamp function allows you to quickly and easily create your own stamp stencil films forcustomized stamps. Select this function to automatically center the text and adjust the tapelength and margins to a perfect format for the pre-inked stamp film holders. Since the stampholder ...
Page 83 - LOCAL FORMAT FUNCTION
79 LOCAL FORMAT FUNCTION The Local format function allows you to emphasize a block of the text by printing it with afont, size, width, style, underline or frame setting that is different from the rest of the text.To use the Local format function: 1 Press , , or to position the cursor in the block th...
Page 84 - FONT FUNCTION; To change the font setting:
80 FONT FUNCTION With the Font function, you can choose one of eight fonts for your text.The following font settings are available: HELSINKI, BRUSSELS, BELGIUM, US, SAN DIEGO, FLORIDA, LOS ANGELES, and ISTAN-BUL The default font setting is HELSINKI.Refer to Reference at the end of this section for s...
Page 86 - SIZE & WIDTH FUNCTIONS; Tape widths
82 SIZE & WIDTH FUNCTIONS The character size can be adjusted using both the Size and Width functions. Since the charac-ter size that can be used depends on the width of the tape, the following table shows the char-acter sizes that can be used with each tape width. The default size setting is AUT...
Page 87 - A U T O; S I Z E
83 To change the size setting: 1 While holding down , press once, and keep held down to display the current size setting. 2 While still holding down , continue pressing until the desired size setting is displayed and is shown by the size indicator. ☞ The current character size setting is also shown ...
Page 88 - M E D I U M; W I D E
84 To change the width setting: 1 While holding down , press once, and keep held down to display the current width setting. 2 While still holding down , continue pressing until the desired width setting is displayed. ☞ The Width indicator lights up when either the NARROW or WIDE setting isselected. ...
Page 90 - STYLE FUNCTION; To change the style setting:; N O R M A L
86 STYLE FUNCTION You can choose from eleven different character styles to apply to your text. ☞ Characters printed using the smaller sizes may be difficult to read if certain style settings(e.g., I+SHADOW) are selected. The following style settings are available: NORMAL I+BOLD (italic & bold) B...
Page 91 - Font; S T Y L E
87 REFERENCE 2 While still holding down , con- tinue pressing until I+SHADOW is displayed. 3 Release . Font setting Style setting NORMAL BOLD OUTLINE SOLID SHADOW ITALIC HELSINKI BRUSSELS BELGIUM US SAN DIEGO FLORIDA LOS ANGELES ISTANBUL I + S H A D O W S T Y L E Alt Caps Width Length A.Format Undl/...
Page 93 - UNDERLINE FUNCTION; To change the underline setting:; ON; To select the ON underline setting:; O N
89 UNDERLINE FUNCTION You can add emphasis to your text by underlining it or striking it out.The default underline setting is OFF. When the Underline function is set to ON or STRIKE-OUT, the Undl/Frm indicator on the right side of the display lights up. To change the underline setting: 1 While holdi...
Page 94 - FRAME FUNCTION; To change the frame setting:; B A N N E R
90 FRAME FUNCTION With the Frame function, you can choose from various frames and highlights to make moredecorative or emphasized text.The following frame settings are available: OFF, SQUARE, ROUND, CANDY, POINTING, NAMEPLATE, DOG, MOVIE FILM, DINO-SAUR, TELEPHONE, HANDS, WINDOW, BANNER, DOT, DIAMON...
Page 96 - TAPE MARGIN FUNCTION; To change the tape margin setting:; F E E D; F U L L
92 TAPE MARGIN FUNCTION The Tape margin function allows you to adjust the size of the margins on the left and rightsides of your text.The default tape margin setting is FULL; however, three other settings are also available. FULL (1” (25 mm) margins)NONE (1/6” (4 mm) margins)NARROW (1/3” (8 mm) marg...
Page 97 - HORIZONTAL ALIGNMENT FUNCTION; To change the horizontal alignment setting:; LEFT; To select the RIGHT horizontal alignment setting:; L E F T; R I G H T
93 HORIZONTAL ALIGNMENT FUNCTION You can choose to align lines of text in one of three ways. In addition, if the Length functionwas used to set the length of the label, the text will align within the label according to theselected horizontal alignment setting.The default horizontal alignment setting...
Page 98 - MIRROR PRINTING FUNCTION; To turn on or off the mirror printing setting:; To select the ON mirror printing setting:
94 MIRROR PRINTING FUNCTION With this function, you can print your text so that the characters can be read from the adhesiveside of the tape. If mirror-printed labels are attached to glass or some other clear material, theycan be read correctly from the opposite side. ☞ When using the Mirror printin...
Page 99 - LENGTH FUNCTION; To turn on or off the Length function:
95 LENGTH FUNCTION Although the length of the printed label automatically adjusts to fit the length of the enteredtext, there may be times when you will want to make a label with a specific length. The Lengthfunction allows you to set the label length between 1.6 and 11.8 inches (4.0 and 30.0 centim...
Page 101 - BARCODE FUNCTION; PARAMETER
97 BARCODE FUNCTION The Barcode function, which enables barcodes to be printed as part of labels, is one of thismachine’s most advanced features. ☞ This section will explain how to enter a barcode into your text. It is not intended as acomprehensive introduction to the concept of barcoding. For more...
Page 103 - To add the barcode to your text:
99 A Press to add the selected special character to the barcode data. To add the barcode to your text: B Press . EXAMPLE 59 [ 76 FF 92 | 60 \ 77 CR 93 GS 61 ] 78 SO 93 } 62 ^ 79 SI 94 RS 63 _ 80 DLE 94 ~ 64 NUL 81 DC1 95 US 64 ` 82 DC2 95 DEL 65 SOH 83 DC3 96 FNC 3 66 STX 84 DC4 97 FNC 2 67 ETX 85 N...
Page 105 - AUTO CUT FUNCTION; To turn on or off the Auto cut function:
101 AUTO CUT FUNCTION The Auto cut function allows you to set whether or not the machine will automatically cut offeach label after it is printed. Turn on the Auto cut function before starting to print in order tocut off the labels automatically after printing them. ☞ After printing a label with the...
Page 106 - PRINT KEY AND FEED & CUT FUNCTION
102 PRINT KEY AND FEED & CUT FUNCTION After you have entered your text and chosen the desired format settings, you are ready to printthe label. The Feed & Cut function is used to feed out 1” (25 mm) of tape and automatically cut it off, forexample after printing with the Auto cut function se...
Page 107 - NUMBERING FUNCTION; To use the Numbering function:
103 NUMBERING FUNCTION This function can be used to print many copies of the same text while increasing certain char-acters (letters, numbers or barcode data) after each label is printed. This type of automaticincrementation is very useful when printing serial number labels, production control label...
Page 110 - REPEAT PRINTING FUNCTION
106 REPEAT PRINTING FUNCTION This function allows you to print multiple copies of the same text. To use the Repeat printing function: 1 Hold down and press . “COPIES” appears in the display. ☞ To quit the Repeat printing function without printing, hold down and press (or press just ). 2 Type in the ...
Page 112 - MEMORY FUNCTIONS; STORING TEXT; To store a text file:
108 MEMORY FUNCTIONS You can use the memory to store your most frequently used text files. The text remains in thememory, even after all characters are removed from the display using the Clear function (seepage 59).When each file is stored, it is given a number to make recalling it easier. Up to 100...
Page 113 - RECALLING TEXT; To recall a text file:; DELETING A FILE; To delete a text file:
109 RECALLING TEXT To recall a text file: 1 Hold down and press . The file number and the beginning of the most recently stored or recalled text are displayed. ☞ To quit the Recall function without recalling text, hold down and press (or press just ). 2 Press or until the file number and text that y...
Page 115 - To delete the text stored under file number 8:
111 To delete the text stored under file number 8: 1 Hold down and press . 2 Press or until 8 is displayed. 3 Press . 4 Press . Alt Caps [ 4 ] N O S M O K I N C L E A R Width Length A.Format Undl/Frm Length Code Code M.Del ( 9 M.Del ( 9 Alt Caps [ 8 ] J . S m i t h C L E A R Width Length A.Format Un...
Page 116 - TROUBLESHOOTING; Problem
112 TROUBLESHOOTING Problem Solution 1. The display stays blank after you have turned on the machine. • Check that the AC adaptor is connected correctly. • If you are using alkaline batteries, check that they are correctly inserted. • If the batteries are low, replace them with new ones. 2. The mach...
Page 117 - ERROR MESSAGE LIST; Error Message
113 ERROR MESSAGE LIST Error Message Cause Solution 7 LINELIMIT! • This message appears if seven lines already exist when you press , or you delete to join two blocks, causing the block to exceed seven lines. • Limit the number of lines in a block to seven. 1 BARCODEPER BLOCK! • This message appears...
Page 122 - SPECIFICATIONS; HARDWARE; dots
118 SPECIFICATIONS HARDWARE SOFTWARE Input device: Keyboard - 51 keys LCD: 7 × 5 dots 12 characters × 2 lines 17 indicators Print tape: Pressure-sensitive, adhesive-based8-m longFive widths available: 1/4” (6 mm)3/8” (9 mm)1/2” (12 mm)3/4” (18 mm)1” (24 mm) Power supply: Eight AA alkaline batteries ...
Page 123 - ACCESSORIES; Description
119 ACCESSORIES ● SuppliesObtain tape cassettes from your nearest authorized dealer. Use only Brother TZ tapes with this machine. Brother cannot be held responsible fortrouble caused by the use of unauthorized supplies. Do not use tapes that do not have the mark. Stock No. Description QTY/PACK AGE P...
Page 125 - P-TOUCH ACCESSORY ORDER FORM; * Prices subject to change without notice.
P-TOUCH ACCESSORY ORDER FORM Dear Customer:This order form is provided for your convenience should your retailer not stock the item(s)needed. To order by mail, send this completed form along with proper payment to the addressbelow OR credit card holders: Call toll-free 1-888-879-3232, fax completed ...
Page 130 - INTRODUCCIÓN; sellos; , podrá hacer membretes con facilidad; AVISO DE LA FCC
INTRODUCCIÓN Gracias por adquirir el P-touch 2400/2410!Su nuevo P-touch le permitirá diseñar y crear etiquetas y sellos para cualquier tipo deaplicación. Su versatilidad le permitirá crear etiquetas personales seleccionando distintosdiseños de marcos y muchos tamaños y estilos de caracteres. Además,...
Page 131 - ÍNDICES; GUIA DE INSTRUCCIONES
I ÍNDICES GUIA DE INSTRUCCIONES PRECAUCIONES GENERALES ............................................................................. 1 PILAS .................................................................................................................. 2 ADAPTADOR DE CA OPCIONAL ....................
Page 133 - PRECAUCIONES GENERALES; de instrumentos ni en la parte trasera de su automóvil.; • Este equipo utiliza ocho pibs ocho pilas alcalinas del tamaño AA.
1 PRECAUCIONES GENERALES • Con esta máquina emplee sólo cintas TZ Brother. No emplee cintas que no tengan la marca . • No tire de la cinta que se alimenta desde el P-touch. Podría dañar el casete de cinta.• No utilice la máquina en lugares polvorientos, y manténgala alejada de la luz solar directa y...
Page 134 - PILAS; Cuando cambie las pilas, reemplace siempre las ocho pilas; Para cambiar las pilas:; Coloque la cubierta del compartimiento de las pilas.
2 PILAS El rotulador electronico de Brother es ligero y portátil puede utilizarse en cualquier lugar insta-lando ocho (8) pilas alcalinas AA. Cuando cambie las pilas, reemplace siempre las ocho pilas al mismo tiempo. Para cambiar las pilas: 1 Extraiga la cubierta del compartimiento de las pilas de l...
Page 135 - ADAPTADOR DE CA OPCIONAL; Para conectar el adaptador de CA opcional:
3 ADAPTADOR DE CA OPCIONAL El adaptador de CA (modelo AD-60) le permite emplear esta máquina siempre que dispongade una toma de corriente eléctrica. Para conectar el adaptador de CA opcional: 1 Inserte la clavija del adaptador en el conector que tiene la marca DC IN 9.5V al ladoderecho de la máquina...
Page 136 - CONEXIÓN DE LA P-TOUCH A UNA PC; interfaz
4 CONEXIÓN DE LA P-TOUCH A UNA PC Es equipo está equipada con un conector de interfase, que le permitirá imprimir las etiquetas ysellos que haya creado con el software P-touch Editor instalado en su PC compatible con IBMPC o Macintosh. Para conectar la P-touch al a la PC: 1 Desconecte la alimentació...
Page 137 - INSTALACIÓN DEL P-TOUCH EDITOR; Espacio libre en el disco duro:
5 INSTALACIÓN DEL P-TOUCH EDITOR La instalación del software de P-touch Editor y el controlador de la impresora añadirá más fun-ciones de ilustración y composición a las posibilidades de confección de etiquetas con su PT-2400/2410. Para instalar el P-touch Editor y el controlador de la impresora en ...
Page 144 - Haga clic sobre el icono del P-touch Editor:; Con el Explorador de Windows:; Active el Explorador de Windows.
12 UTILIZACIÓN DEL-P-TOUCH EDITOR La aplicación P-touch Editor facilita a cualquier usuario el diseño y la impresión de etiquetaspara casi cualquier necesidad imaginable. Activación del P-touch Editor en un ordenador compatible con PC de IBM: Haga clic sobre el icono del P-touch Editor: • Haga doble...
Page 145 - Activación del P-touch Editor en un ordenador Macintosh:; instalada en el ordenador.
13 Activación del P-touch Editor en un ordenador Macintosh: • Haga doble clic sobre el icono P-touch Editor Ver3.0 en la carpeta “P-touch Editor Ver3.0” instalada en el ordenador. Una vez iniciado el P-touch Editor, se visualizará la pantalla siguiente: Barra de menús Barra de herramien- tas de dibu...
Page 146 - DISEÑO DE UNA COMPOSICIÓN DE FORMATO AUTOMÁTICO; Haga clic en el botón Next.; Repita los pasos
14 DISEÑO DE UNA COMPOSICIÓN DE FORMATO AUTOMÁTICO Además de permitirle trazar dibujos y disponer texto utilizando cualquiera de las fuentes,tamaños, y estilos disponibles, el P-touch Editor dispone de gran variedad de plantillas prefor-mateadas que facilitan y agilizan la creación de composiciones ...
Page 147 - Para designar una composición en un ordenador Macintosh:
15 9 Haga clic en el botón Next. 0 En el cuadro de diálogo Auto Format Wizard(4/4), haga clic en las opciones deseadas. A Haga clic en el botón Finish. En el área devisualización aparecerá una nueva composi-ción que contendrá el texto preformateado. Para designar una composición en un ordenador Maci...
Page 149 - IMPORTACIÓN DE UN ARCHIVO DE GRÁFICOS; Importación de un archivo de gráficos:
17 IMPORTACIÓN DE UN ARCHIVO DE GRÁFICOS Con la aplicación del P-touch Editor también puede importar archivos de imágenes de distin-tos formatos (.bmp, .dib, .jpg, .gif, .tif, .ico, y .wmf en el PC o PICT, JPEG, TIFF y BMP en elMac) en su composición. Importación de un archivo de gráficos: 1 Con un ...
Page 150 - LECTURA DE LA GUÍA DE USUARIO; Instalación de Internet Explorer 4.01 en un ordenador Macintosh:; Haga doble clic sobre Main.htm en la carpeta Manual.
18 LECTURA DE LA GUÍA DE USUARIO La Guía de Usuario del P-touch Editor puede leerse íntroduciendo el CD-ROM en su disque-tera siempre que desee remitirse a la misma o instalándola en el disco duro de modo quepueda acceder a ella rápidamente. Dado que la Guía de Usuario es un documento HTML, esnecesa...
Page 152 - CASETES DE CINTA; Para cambiar el casete de cinta:; Si ya hay un casete instalado, extráigalo tirando hacia arriba.
20 CASETES DE CINTA Un casete de TZ se suministra con la unidad. Sin embargo, para este equipo hay disponiblesuna amplia gama de casetes de cinta TZ de distintos colores y tamaños, es posible crear eti-quetas diferentes codificadas por colores o tamaños.Además, este equipo ha sido diseñada para perm...
Page 153 - COLOCACIÓN DE ETIQUETAS; CINTA LAMINADA; Pele el papel del dorso de la etiqueta.; CINTAS DE TELA; La etiqueta tendrá un fondo blanco sobre tela de color.; CINTAS DE SELLOS
21 COLOCACIÓN DE ETIQUETAS CINTA LAMINADA La varilla suministrada permite que, en las cintas laminadas, usted pueda extraer facilmente elpapel del dorso de la etiqueta. 1 Tome la cinta con la mano izquierda, con la superficie impresa arriba y tome la varillacon la mano derecha. 2 Pase la mitad de la...
Page 154 - CABEZAL DE IMPRESIÓN Y RODILLOS; Para limpiar el cabezal de impresión y los rodillos:; Desconecte la alimentación de la máquina.
22 CABEZAL DE IMPRESIÓN Y RODILLOS De vez en cuando, motas de polvo se adhieren al cabezal de impresión y a los rodillos de lamáquina. Suele suceder cuando se emplea la unidad en exteriores o en lugares con muchopolvo. Si alguna parte del cabezal de impresión está cubierta de polvo, es posible que a...
Page 155 - TECLA DEL CURSOR; TECLA DEL CURSOR IZQUIERDA
23 TECLA DEL CURSOR El visualizador de LCD de esta máquina muestra dos filas de 11 caracteres; sin embargo, eltexto que usted cree puede tener hasta 255 caracteres de longitud. Podrá revisar y editar eltexto empleando las teclas del cursor para moverlo y que muestre las distintas partes en elvisuali...
Page 157 - TECLAS CODE, ALT Y SHIFT; TECLA CODE; Para emplear una función impresa encima de la tecla:; TECLA ALT
25 TECLAS CODE, ALT Y SHIFT La mayoría de los caracteres pueden introducirse simplemente presionando sus teclas. Sinembargo, para emplear funciones especiales o para introducir letras en mayúsculas, caracteresacentuados y algunos símbolos, se requieren las siguientes teclas especiales. TECLA CODE Pa...
Page 158 - TECLA DE RETORNO; tar archivos. En estos casos, si presiona; Anchuras de cinta
26 TECLA DE RETORNO Al igual que en una máquina de escribir o procesador de texto, la tecla de retorno ( ) de esta máquina se emplea para poner fin a una línea de texto y empezar otra. Cuando hayaterminado de introducir una línea, presione la tecla de retorno para hacer una línea nueva ymover al cur...
Page 159 - FUNCIÓN DE NUEVO BLOQUE; Para añadir un nuevo bloque:
27 FUNCIÓN DE NUEVO BLOQUE Cuando cambie el número de líneas de una sección del texto, tendrá que crear un nuevo blo-que. ☞ Una etiqueta solamente podrá contener un máximo de cinco bloques. Si el cursor se encuentra en el quinto bloque cuando mantenga presionado y presione , aparecerá el mensaje de ...
Page 160 - TABULACIÓN; Para ajustar la longitud de las tabulaciones:
28 TABULACIÓN Esta función le permitirá separar secciones de una línea de texto añadiendo tabulaciones. Estole permitirá crear columnas perfectamente alineadas sin tener que introducir varios espacios.Todas las tabulaciones tendrán la misma longitud y se medirán desde el comienzo de la línea,o de la...
Page 162 - Para borrar una línea de texto:
30 FUNCIÓN DE BORRADO DE LÍNEA (LINE OUT) Con la función de borrado de línea, podrá sacar con facilidad una línea entera de texto. Para borrar una línea de texto: 1 Presione , , o para situar el cursor dentro de la línea del texto que usted desee borrar. 2 Mantenga presionado y presione una vez. ☞ C...
Page 163 - FUNCIÓN DE ACENTOS; Para escribir un carácter acentuado:
31 FUNCIÓN DE ACENTOS La función de Acentos también puede utilizarse para añadir caracteres acentuados a su texto.Muchos de estos caracteres también pueden encontrarse en las teclas, y escribirse utilizando (consulte la page 25), o podrán introducirse utilizando la función de símbolos (consulte las ...
Page 164 - FUNCIÓN DE SÍMBOLOS; Para escribir un símbolo:
32 FUNCIÓN DE SÍMBOLOS Además de letras, de los símbolos y los números de las teclas, hay 67 marcas adicionales conla función de símbolos.Los siguientes símbolos están disponibles: ☞ La utilización de ciertos símbolos contenidos en esta máquina etiquetadora puede estarregulada por las normas locales...
Page 165 - FUNCIÓN DE FORMATO AUTOMÁTICO; Para introducir texto en la disposición:
33 FUNCIÓN DE FORMATO AUTOMÁTICO La función de Formato automático agiliza y facilita la creación de etiquetas. Después deseleccionar simplemente una de las diversas disposiciones preformateadas y de escribir eltexto en cada campo de la disposición, el estilo global de la etiqueta podrá cambiarse fác...
Page 166 - Para cambiar el texto introducido en la disposición:
34 Para cambiar el texto introducido en la disposición: A Presione o hasta que se visualice el comando EDIT MORE. B Presione . En el visualizador aparecerá el primer campo para la disposición seleccionada. C Repita el paso 4 hasta editar el texto en la forma deseada. Cuando presione des- pués de hab...
Page 169 - Nombre del
37 37 3.5” FLOPPY 1” × 2.7” (24 mm × 69 mm) 1 1 TITLE? 3 3 NAME? 2 2 SUBTITLE? 38 3/4” × 2.7” (18 mm × 69 mm) 39 5” FLO PPY 1” × 3.1” (24 mm × 79 mm) 1 1 TITLE? 3 3 NAME? 2 2 SUBTITLE? 40 3/4” × 3.1” (18 mm × 79 mm) No. Nombre del formato Anchura de cinta × longitud de etiqueta Campos de distribució...
Page 170 - FUNCIÓN DE CREACION DE SELLOS; Para adherir un sello:
38 FUNCIÓN DE CREACION DE SELLOS La función de sellos le permite crear con rapidez y facilidad sus propios clichés para sellospersonalizados. Seleccione esta función para centrar automáticamente el texto y ajustar la lon-gitud de la cinta y los márgenes a un formato perfecto para los soportes de pel...
Page 173 - FUNCIONES DE TAMAÑO Y DE ANCHURA; Anchos de cinta
41 FUNCIONES DE TAMAÑO Y DE ANCHURA El tamaño de los caracteres puede ajustarse empleando las funciones de tamaño (Size) y deancho (Wide). Puesto que el tamaño de los caracteres que puede utilizarse depende del anchode la cinta, la tabla siguiente indica los tamaños de caracteres que pueden utilizar...
Page 175 - FUNCIÓN DE ESTILO
43 FUNCIÓN DE ESTILO Podrá seleccionar entre 11 estilos de caracteres distintos que podrá aplicar a su texto. ☞ Los caracteres que se imprimen utilizando los tamaños más pequeños pueden resultardifíciles de leer si se seleccionan ciertos ajustes de estilos (por ejemplo, I+SHADOW). Hay disponibles lo...
Page 176 - FUNCIÓN DE SUBRAYADO; Para cambiar el ajuste del subrayado:
44 FUNCIÓN DE SUBRAYADO Podrá acentuar el texto tachándolo o subrayándolo.El ajuste de subrayado predeterminado es OFF. Cuando haya ajustado la función de subra-yado a ON o STRIKEOUT, el indicador Undl/Frm de la parte derecha del visualizador seencenderá. Para cambiar el ajuste del subrayado: 1 Mant...
Page 177 - FUNCIÓN DE MARCOS
45 FUNCIÓN DE MARCOS Con la función de marcos, podrá seleccionar diversos marcos y funciones destacadas parahacer un diseño más decorativo o una etiqueta con más énfasis.Los marcos disponibles son: OFF, SQUARE, ROUND, CANDY, POINTING, NAMEPLATE, DOG, MOVIE FILM, DINOSAUR, TELEPHONE, HANDS, WINDOW, B...
Page 178 - REFERENCIA
46 REFERENCIA Ajustes del marco Muestras de marco Ajustes del marco Muestras de marco OFF (normal) DINOSAUR SQUARE TELEPHONE ROUND HANDS CANDY WINDOW POINTING BANNER NAMEPLATE DOT DOG DIAMOND MOVIE FILM SLANT
Page 179 - FUNCIÓN DE MARGENES; Para cambiar el ajuste de la cinta:
47 FUNCIÓN DE MARGENES La función de margenes le permite ajustar el tamaño de los márgenes de los lados izquierdo yderecho del texto.El ajuste inicial de margen cinta es FULL, aunque hay también disponibles otros tres ajustes. FULL (márgenes de 1” (25 mm))NONE (márgenes de 1/6” (4 mm))NARROW (márgen...
Page 180 - FUNCIÓN DE LA ALINEACIÓN HORIZONTAL; Para cambiar el ajuste de la alineación horizontal:
48 FUNCIÓN DE LA ALINEACIÓN HORIZONTAL Podrá elegir alinear texto en una de las tres formas disponibles. Además, si utilizó la funciónde longitud para ajustar la longitud de la etiqueta, los texto se alinearán dentro de la etiquetade acuerdo con el ajuste de alineación horizontal seleccionado.El aju...
Page 181 - FUNCIÓN DE IMPRESIÓN EN MODO ESPEJO; Para activar o desactivar la impresión en modo espejo:
49 FUNCIÓN DE IMPRESIÓN EN MODO ESPEJO Con esta función, podrá imprimir el texto de modo que los caracteres puedan leerse desde ellado del adhesivo de la cinta. Si se adhieren etiquetas con impresión en modo espejo a unvidrio, o en otro material transparente, podrán leerse correctamente desde el lad...
Page 182 - FUNCIÓN DE LONGITUD; Para activar y desactivar la función de longitud:
50 FUNCIÓN DE LONGITUD Aunque la longitud de la etiqueta impresa ajusta automáticamente dicha longitud de acuerdocon el texto introducido, es posible que usted desee hacer una etiqueta con una longitud espe-cífica. La función de longitud le permitirá ajustar la longitud de la etiqueta entre 1,6” y 1...
Page 183 - FUNCIÓN DE CÓDIGO DE BARRAS; PARÁMETRO
51 FUNCIÓN DE CÓDIGO DE BARRAS La función de Código de barras, que permite imprimir códigos de barras como parte de las eti-quetas, es una de las características más avanzadas de la máquina. ☞ En esta sección explicaremos cómo introducir un código de barras en su texto. No tieneel propósito de ser u...
Page 185 - Presione; Para añadir el código de barras a su texto:
53 A Presione para añadir el carácter especial seleccionado al código de barras. Para añadir el código de barras a su texto: B Presione . 60 \ 77 CR 93 GS 61 ] 78 SO 93 } 62 ^ 79 SI 94 RS 63 _ 80 DLE 94 ~ 64 NUL 81 DC1 95 US 64 ` 82 DC2 95 DEL 65 SOH 83 DC3 96 FNC 3 66 STX 84 DC4 97 FNC 2 67 ETX 85 ...
Page 186 - FUNCIÓN DE CORTE AUTOMÁTICO; Para activar o desactivar la función de corte automático:
54 FUNCIÓN DE CORTE AUTOMÁTICO La función de corte automático le permite ajustar si la máquina va a cortar automáticamente ono una etiqueta después de imprimirse ésta. Active la función de corte automático antes deempezar a imprimir para cortar automáticamente las etiquetas después de imprimirlas. ☞...
Page 187 - TECLA DE IMPRESIÓN & FUNCIÓN DE AVANCE Y CORTE
55 TECLA DE IMPRESIÓN & FUNCIÓN DE AVANCE Y CORTE Después de haber introducido su texto y de haber elegidos los ajustes de formato deseados,podrá imprimir. La función de avance y corte se utiliza para hacer que la cinta avance 1” (25 mm) y se corteautomáticamente, por ejemplo después de haber im...
Page 188 - FUNCIÓN DE NUMERACIÓN; Para utilizar la función de numeración:
56 FUNCIÓN DE NUMERACIÓN Esta función podrá utilizarse para imprimir muchas copias del mismo texto aumentando cier-tos caracteres (letras, números, o códigos de barras) después de la impresión de cada etiqueta.Este tipo de incremento automático será muy útil para imprimir etiquetas de números en ser...
Page 189 - FUNCIÓN DE IMPRESIÓN REPETIDA
57 6 Escriba el número deseado o presione o hasta que se visualice el número de copias deseado. 7 Para iniciar la impresión, presione (o ). Antes de que comience la impre- sión aparecerá el mensaje “WORKING” y después se visualizará “COPIES” seguido por elnúmero de la copia que esté imprimiéndose. ☞...
Page 190 - FUNCIONES DE LA MEMORIA; ALMACENAMIENTO DE TEXTO; Para almacenar un archivo de texto:
58 FUNCIONES DE LA MEMORIA Usted podrá utilizar la memoria para almacenar sus archivos de texto más frecuentemente uti-lizados. El texto permanecerá en la memoria, incluso después de haber eliminado todos loscaracteres del visualizador utilizando la función de Borrado (consulte la page 29).Cuando se...
Page 191 - INVOCACIÓN DE TEXTO; Para invocar un archivo de texto:; BORRADO DE UN ARCHIVO; Para borrar un archivo de texto:
59 INVOCACIÓN DE TEXTO Para invocar un archivo de texto: 1 Mantenga presionado y presione . Se visualizarán el número de archivo y el comienzo del texto más recientemente almacenado o invocado. ☞ Para abandonar la función de Invocación sin almacenar el texto, mantenga presio- nado y presione (o simp...
Page 192 - SOLUCIÓN DE PROBLEMAS; Problema
60 SOLUCIÓN DE PROBLEMAS Problema Remedio 1. El visualizador se queda en blanco después de haber conectado la ali-mentación de la máquina. • Compruebe que el adaptador de CA esté correctamente enchufado. • Si está empleando pilas alcalinas, compruebe que estén correctamente insertadas. • Si las pila...
Page 193 - LISTA DE MENSAJES DE ERROR; Mensaje de error
61 LISTA DE MENSAJES DE ERROR Mensaje de error Causa Remedio 7 LINELIMIT! • Este mensaje aparecerá si ya existen siete líneas cuando presione , o si borra para unir dos bloques, haciendo que el bloque sobrepase siete líneas. • Limite el número de líneas de un bloque a siete. 1 BARCODEPER BLOCK! • Es...
Page 199 - ESPECIFICACIONES; Teclado de 51 teclas
67 ESPECIFICACIONES HARDWARE SOFTWARE Dispositivo de entrada: Teclado de 51 teclas LCD: 7 × 5 puntos 12 caracteres × 2 líneas 17 indicadores Cinta de impresión: Sensible a la presión, base adhesiva, 8 m de longitudCinco anchos disponibles: 1/4” (6 mm)3/8” (9 mm)1/2” (12 mm)3/4” (18 mm)1” (24 mm) Ali...
Page 200 - ACCESORIOS; producto
68 ACCESORIOS ● Accesorios de consumoAdquiera los casetes de cinta en el distribuidor autorizado que le quede más cerca.Emplee sólo cintas Brother TZ con esta máquina. Brother no puede hacerse responsablepor los problemas causados por el empleo de accesorios de consumo no autorizados. Noemplee cinta...