Page 2 - Note
2 2 Load plain Letter/A4 paper a Pull the paper tray a completely out of the machine. b Open the paper tray cover a . c With both hands, gently press and slide the paper side guides a and then the paper length guide b to fit the paper size. Make sure that the triangular marks c on the paper side gui...
Page 5 - Install the ink cartridges; WARNING
5 4 Install the ink cartridges WARNING If ink gets in your eyes, wash them out with water at once, and if irritation occurs consult a doctor. a Make sure that the power is turned on.The LCD shows: b Open the ink cartridge cover a . c Remove the green protective part a . d Unpack the ink cartridge. e...
Page 8 - Choose the correct Receive Mode
8 7 Choose the correct Receive Mode The correct Receive Mode is determined by the external devices and telephone subscriber services (Voice Mail, Distinctive Ring, etc.) you have (or will be using) on the same line as the Brother machine. a Press Menu . b Press a or b to choose Initial Setup . Press...
Page 10 - Set your station ID
10 10 Set your station ID You should store your name and fax number to be printed on all fax pages that you send. a Press Menu . b Press a or b to choose Initial Setup . Press OK . c Press a or b to choose Station ID . Press OK . d Enter your fax number (up to 20 digits) on the dial pad, and then pr...
Page 13 - Choose your connection type; For USB interface cable
13 W indows ® Macintosh ® Window s ® Macintosh ® USB W ired Network Wirele ss Network 14 Choose your connection type For USB interface cable Windows ® , go to page 14 Macintosh ® , go to page 18 For Wired Network Windows ® , go to page 21 Macintosh ® , go to page 26 For Wireless Network Windows ® an...
Page 14 - Windows Vista
14 Windows ® USB For USB Interface Users (For Windows ® 2000 Professional/XP/ XP Professional x64 Edition/ Windows Vista ® ) 15 Before you install a Make sure that your computer is ON and you are logged on with Administrator rights. b Unplug the machine from the AC outlet and from your computer, if ...
Page 15 - indows
15 Windows ® USB W indows ® Macintosh ® USB c When the ScanSoft ™ PaperPort ™ 11SE License Agreement window appears, click Yes if you agree to the Software License Agreement . d The installation of ScanSoft™ PaperPort™ 11SE will automatically start and is followed by the installation of MFL-Pro Suit...
Page 16 - Connect the USB cable
16 Windows ® USB 17 Connect the USB cable a Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position. b Connect the USB cable to the USB socket marked with a symbol. You will find the USB socket inside the machine on...
Page 17 - Connect the power cord; Finish and restart; Now go to; Finish
17 Windows ® USB W indows ® Macintosh ® USB 18 Connect the power cord a Connect the power cord. The installation will continue automatically.The installation screens appear one after another. b When the On-Line Registration screen is displayed, make your selection and follow the on-screen instructio...
Page 18 - For USB Interface Users (For Mac OS
18 Macintosh ® USB For USB Interface Users (For Mac OS ® X 10.2.4 or greater) 15 Before you install a Make sure your machine is connected to the power and your Macintosh ® is ON. You must be logged on with Administrator rights. 16 Connect the USB cable a Using both hands, use the plastic tabs on bot...
Page 19 - Install MFL-Pro Suite
19 Macintosh ® USB W indows ® Macintosh ® USB 17 Install MFL-Pro Suite a Put the supplied CD-ROM into your CD-ROM drive. b Double-click the Start Here OSX icon to install. c Choose Local Connection , and then click Next . Follow the on-screen instructions. d The Brother software will search for the ...
Page 20 - PageManager
20 Macintosh ® USB 18 Install Presto! ® PageManager ® When Presto! ® PageManager ® is installed OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! ® PageManager ® . a Double-click the Presto! PageManager icon and follow the o...
Page 21 - Window; Connect the network
21 Windows ® Wired Network Window s ® Macintosh ® Wired Network For Wired Network Interface Users (For Windows ® 2000 Professional/XP/ XP Professional x64 Edition/ Windows Vista ® ) 15 Before you install a Make sure that your computer is ON and you are logged on with Administrator rights. b Unplug t...
Page 25 - Install MFL-Pro Suite on
25 Windows ® Wired Network Window s ® Macintosh ® Wired Network i When the On-Line Registration screen is displayed, make your selection and follow the on-screen instructions. Once you have completed the registration process, close your web browser to return to this window.Then click Next . 19 Finis...
Page 26 - For Wired Network Interface Users (For Mac OS
26 Macintosh ® Wired Network For Wired Network Interface Users (For Mac OS ® X 10.2.4 or greater) 15 Before you install a Make sure your machine is connected to the power and your Macintosh ® is ON. You must be logged on with Administrator rights. 16 Connect the network cable a Using both hands, use...
Page 29 - For Wireless Network Users; Wirele; For Wireless Network Interface Users
29 For Wireless Network Users Wirele ss Network For Wireless Network Interface Users 15 Before you begin First you must configure the wireless network settings of your machine to communicate with your network access point (router). After the machine is configured to communicate with your access poin...
Page 30 - Confirm your network environment (Infrastructure Mode)
30 For Wireless Network Users 16 Confirm your network environment (Infrastructure Mode) The following instructions will offer two methods for installing your Brother machine in a wireless network environment. Both methods are for infrastructure mode, using a wireless router or access point that uses...
Page 31 - Connecting the Brother machine to the wireless network
31 For Wireless Network Users Wirele ss Network Connecting the Brother machine to the wireless network 17 Configure the wireless settings (Typical Wireless Setup in infrastructure mode) a On your machine, press Menu . Press a or b to choose Network and press OK . Press a or b to choose WLAN and pres...
Page 32 - step
32 For Wireless Network Users You can use the d and c keys to move the cursor left and right. For example, to enter the letter a , press the 2 key on the dial pad once. To enter the number 3 , press the 3 key on the dial pad seven times. The letters appear in this order: lower case, upper case and t...
Page 33 - Configure the wireless
33 For Wireless Network Users Wirele ss Network 17 Configure the wireless settings using the automatic wireless (one- push) method a Confirm your wireless router or access point has the SecureEasySetup™, Wi-Fi Protected Setup™ or AOSS™ symbol as shown below. b Place the Brother machine within range ...
Page 34 - Wireless setup is now complete. To
34 For Wireless Network Users Wireless setup is now complete. To install MFL-Pro Suite, continue to step 18 . For Windows ® Users: Now go to Page 35 For Mac OS ® Users: Now go to Page 39
Page 35 - Windows
35 Windows ® Wireless Network Windows ® Macinto sh ® Wirele ss Network Install the Drivers & Software (For Windows ® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista ® ) 18 Before you install MFL-Pro Suite a Make sure that your computer is ON and you are logged on with Administrat...
Page 39 - Before you install
39 Macintosh ® Wireless Network Windows ® Macinto sh ® Wirele ss Network Install the Drivers & Software(For Mac OS ® X 10.2.4 or greater) 18 Before you install MFL-Pro Suite a Make sure your machine is connected to the power and your Macintosh ® is ON. You must be logged on with Administrator ri...
Page 42 - Install FaceFilter Studio
42 Windows ® Install Optional Applications 1 Install FaceFilter Studio supported by Reallusion, Inc FaceFilter Studio is an easy-to-use borderless photo printing application. FaceFilter Studio also lets you edit your photo data and add photo effects such as red eye reduction or skin tone enhancement...
Page 43 - Install
43 Windows ® Install Optional Applications 3 Install BookScan&Whiteboard Suite supported by Reallusion, Inc You can install BookScan&Whiteboard Suite . The BookScan Enhancer software can correct your scanned book images automatically. The Whiteboard Enhancer software cleans up and enhances t...
Page 44 - For Network Users; BRAdmin Light utility (For Windows; Install the BRAdmin Light
44 For Network Users BRAdmin Light utility (For Windows ® users) BRAdmin Light is a utility for initial setup of Brother network connected devices. It also can search for Brother products on your network, view the status and configure basic network settings, such as IP address.For more information o...
Page 45 - BRAdmin Light utility (For Mac OS; Set your IP address, Subnet Mask
45 For Network Users BRAdmin Light utility (For Mac OS ® X users) BRAdmin Light is a utility for initial setup of Brother network connected devices. It also can search for Brother products on your network, view the status and configure basic network settings, such as IP address from a computer runni...
Page 46 - Restore the network settings to factory default; Entering Text for Wireless Settings
46 For Wireless Network Users Restore the network settings to factory default To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below. a Make sure the machine is not operating, then disconnect all the cables from the machine (except the pow...
Page 47 - Consumables; Replacement consumables; Ink cartridge
Consumables Replacement consumables When the time comes to replace ink cartridges, an error message will be indicated on the LCD. For more information about the ink cartridges for your machine, visit http://www.brother.com/original/ or contact your local Brother re-seller. Ink cartridge Trademarks T...