Brother MFC-230C- User Manual

Section I Windows ® I Printing 2 Scanning 28 ControlCenter3 53 Network Scanning (For models with built-in network support) 79 Remote Setup (Not available for DCP models and MFC-230C) 87 Brother PC-FAX Software (MFC models only) 89 PhotoCapture Center ® 105 Firewall settings (For Network users) 108

2 1 1 Note • The screens in this section are from Windows ® XP. Screens on your PC may vary depending on your operating system. • If your PC is protected by a firewall, and you are unable to network print, network scan or PC Fax, you may need to configure the firewall settings. For more information,...

Printing 3 1 Choosing the right type of paper 1 For high quality printing, it is important to choose the right type of paper. Be sure to read About paper in the User’s Guide before buying paper. Simultaneous printing, scanning and faxing 1 Your machine can print from your computer while sending or r...

Printing 4 1 Monitoring the machine’s status 1 Once you start up your PC, the Status Monitor icon appears on the tasktray. „ A green icon indicates the normal stand-by condition. „ A yellow icon indicates a warning. „ A red icon indicates an error has occurred. There are two locations where you can ...

Printing 5 1 Printer driver settings 1 You can change the following printer settings when you print from your PC: „ Media Type / Quality (Speed) „ Paper Size „ Page Layout „ Color Matching / Halftone „ Color Enhancement „ Scaling „ Watermark „ Print Date & Time „ Quick Print Setup Accessing the ...

Printing 6 1 Basic tab 1 a Choose your setting for Slow Drying Paper , Media Type and Quality (1). Note Check Slow Drying Paper when printing with plain paper on which ink dries slowly. This setting may cause some slight blurring of text. b Choose Paper Size , Page Layout , Page Order , Borderless ,...

Printing 7 1 Quality 1 The quality selection lets you choose the print resolution. As print quality and speed are related, the higher the quality, the longer it will take to print the document. The quality selections that are available will vary depending on the media type you choose. „ Highest Up t...

Printing 8 1 Enhanced Print Settings 1 Click the Settings button to see options for enhanced print settings. Bi-Directional Printing 1 When Bi-Directional Printing is checked, the print head prints in both directions offering faster print speeds. When unchecked, the print head will only print in one...

Printing 10 1 Improve Pattern Printing 1 Select the Improve Pattern Printing option if the printed fills and patterns appear different to how they appear on your computer screen. Paper Size 1 The Paper Size selection includes a large selection of standard paper sizes. If you want, you can create a c...

Printing 11 1 Border Line 1 When printing multiple pages on one sheet with the Page Layout feature, you can choose to have a solid border, dashed border or no border around each page on the sheet. Orientation 1 Orientation chooses the position your document will be printed (in Portrait or Landscape ...

Printing 12 1 Advanced tab 1 Change the tab settings by clicking one of the following icons: „ Color (1) „ Scaling (2) „ Watermark (3) „ Device Options (4) Note To return to the default settings, click Default . Color 1 Color/Grayscale 1 This selection allows a color document to be printed in black ...

Printing 13 1 Image Type 1 The printer driver will choose the most suitable color matching and half tone method, depending on your image type. Generally, text and business graphics are printed vividly and photographic images are printed softly. „ Auto The printer driver automatically chooses the ima...

Printing 15 1 Scaling 1 You can change the print size of your document with the Scaling feature. „ Choose Off if you want to print the document as it appears on your screen. „ Choose Fit to Paper Size if your document has an unusual size, or if you only have standard size paper. „ Choose Free if you...

Printing 16 1 Watermark 1 You can print a logo or text onto your document as a Watermark. You can choose one of the preset Watermarks, or you can use a bitmap file or text file that you have created.Check Use Watermark , and then choose the watermark you want to use. In background 1 Check In backgro...

Printing 17 1 Watermark Setting 1 You can change the watermark size and position on the page by choosing the watermark, and clicking the Edit button. If you want to add a new watermark, click the New button, and then choose Text or Bitmap in Watermark Style . „ Title Choose CONFIDENTIAL , COPY or DR...

Printing 18 1 Device Options 1 You can set the following Printer Functions: Print Date & Time 1 When the Print Date & Time feature is enabled, the date and time will print on your document from your PC’s system clock. Click the Setting button to change the Date , Time , Position and Font . T...

Printing 19 1 Quick Print Setup 1 The Quick Print Setup feature lets you quickly choose driver settings. Set Quick Print Setup to On and choose the function which should be displayed in the Quick Print Setup icon. To view and change settings, click the tasktray icon. Photo Bypass Tray Help (Not avai...

Printing 20 1 Support tab 1 The Support tab shows the driver version and settings information. There are also links to the Brother Solutions Center and Genuine Supplies websites. Click the Support tab to display the following screen: „ Brother Solutions Center The Brother Solutions Center is a websi...

Printing 21 1 Using FaceFilter Studio for photo printing by REALLUSION 1 FaceFilter Studio is an easy-to-use borderless photo printing application. FaceFilter Studio also lets you edit your photo data. You can add photo effects such as red eye reduction or skin tone enhancement. To use FaceFilter St...

Printing 22 1 Starting FaceFilter Studio with your Brother machine turned On 1 a When you launch FaceFilter Studio for the first time, this screen will appear, if your Brother machine is turned On, and connected to your computer, the FaceFilter Studio will detect your Brother machine. b After you cl...

Printing 23 1 Starting FaceFilter Studio when your Brother machine is turned Off 1 a When you launch FaceFilter Studio for the first time, this screen will appear, if your Brother machine is turned Off or not connected. b Click Detect in step a ,and this screen will appear. c If FaceFilter Studio do...

Printing 24 1 e After you click the check mark in step d , FaceFilter Studio will start with limited functionality. The Print icon on the top menu will be grayed out and you will not be able to use the Print function. Note • When FaceFilter Studio starts with limited functionality, photo data will b...

Printing 26 1 e Click Print Setting and choose your Brother machine. Click OK . Note If you want to use photo paper, click Properties and set the Media Type and Quality in the printer driver dialog. f Click Print in the Print settings dialog box and your photo will print. Smart Portrait 1 The Smart ...

Printing 27 1 Print Expression List 1 FaceFilter Studio lets you modify a facial expression by applying an expression templates or by manual adjustment. In the Select Expression step, you can preview or print the expression list of your choice. Uninstalling FaceFilter Studio 1 To uninstall FaceFilte...

28 2 2 Scanning operations and the drivers used will differ depending on the operating system you are using. As default, the machine uses a TWAIN compliant driver when scanning documents from your applications. „ For Windows ® XP/Windows Vista™ Two scanner drivers are installed. A TWAIN compliant sc...

Scanning 29 2 c Click Select button. d Choose the scanner you are using from the Available Scanners list. Note • For Windows ® XP/Windows Vista™: Choose TW-Brother MFC-XXXX or TW-Brother MFC-XXXX LAN . • For other operating systems: Choose Brother MFC-XXXX or Brother MFC-XXXX LAN . (Where XXXX is yo...

Scanning 30 2 Note After you select a document size, you can adjust the scanning area further by clicking the left mouse button and dragging it. This is required when you want to crop an image when scanning. Pre-Scanning an image — to crop a portion you want to scan 2 The PreScan button is used to p...

Scanning 31 2 Note You can enlarge the image using the icon, and then use the icon to restore the image to its original size. e Load your document again. Note Skip this step if you loaded the document on the scanner glass in step a . f Click Start . This time only the chosen area of the document app...

Scanning 32 2 Resolution 2 You can choose a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and transfer time, but produce a finer scanned image. The following table shows the resolutions you can choose and the available colors. Scan Type 2 „ Black & W...

Scanning 33 2 Brightness 2 Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average and is usually suitable for most images.You can set the Brightness level by dragging the slide bar to the right or left to lighten or darken the image. You can also enter ...

Scanning 35 2 Scanning a document using the WIA driver(For Windows ® XP/Windows Vista™) 2 WIA compliant 2 For Windows ® XP/Windows Vista™ you can choose Windows ® Image Acquisition (WIA) when scanning images. You can scan images directly into the PaperPort™ 11SE viewer that Brother included with you...

Scanning 36 2 Scanning a document into the PC 2 There are two ways to scan a whole page. You can either use the ADF (automatic document feeder) or the Flatbed scanner glass.If you want to scan and then crop a portion of a page after pre-scanning the document, you must scan using the scanner glass (F...

Scanning 37 2 e If you want to change some advanced settings, click Adjust the quality of the scanned picture (3). You can choose Brightness , Contrast , Resolution and Picture Type from Advanced Properties . Click OK after you choose the settings. Note By default, the scanner resolution can be set ...

Scanning 38 2 1 Paper source2 Picture type3 Adjust the quality of the scanned picture4 Scanning area c Choose the picture type (2). d Click Preview . The whole image is scanned into the PC and appears in the scanning area (4). e Press and hold down the left mouse button and drag it over the portion ...

Scanning 39 2 f If you need to access advanced settings, click Adjust the quality of the scanned picture (3). You can choose Brightness , Contrast , Resolution and Picture Type from Advanced Properties . Click OK after you choose a setting. g Click the Scan button in the Scan dialog box. The machine...

Scanning 40 2 Note For Windows Vista™ the User Account Control screen appears, do the following. • For users who have administrator rights: Click Allow . • For users who do not have administrator rights: Enter the administrator password and click OK .

Scanning 41 2 Scanning a document using the WIA driver(For Windows Vista™ Photo Gallery and Windows Fax and Scan users) 2 Accessing the scanner 2 a Open your software application to scan the document. b Do one of the following: „ For Windows Photo GalleryClick File , then Import from Camera or Scann...

Scanning 42 2 b Adjust the following settings, if needed, in the Scanner dialog box. 1 Profile2 Source3 Paper size4 Color format5 File type6 Resolution7 Brightness8 Contrast Note By default, the scanner resolution can be set to a maximum of 1200 dpi.If you want to scan at higher resolutions, use the...

Scanning 44 2 Using the Scan key (For USB cable users) 2 Note If you use the Scan key on a network, see Using the Scan key on page 83. You can use the ( Scan ) key on the control panel to scan documents directly into your word processing, graphics or E-mail applications, to a folder on your PC or to...

Scanning 45 2 b Press the ( Scan ) key. c Press a or b to choose Scan to Image . Press OK . d Press Black Start or Color Start . The machine starts the scanning process. Note • If you want to change between color and black and white scanning, choose color or black and white in the scan type option o...

Scanning 49 2 Using ScanSoft™ PaperPort™ 11SE with OCR by NUANCE™ 2 Note ScanSoft™ PaperPort™ 11SE supports Windows ® 2000 (SP4 or greater) or XP (SP2 or greater), XP Professional x64 Edition and Windows Vista™ only. ScanSoft™ PaperPort™ 11SE for Brother is a document management application. You can...

Scanning 50 2 Viewing items 2 ScanSoft™ PaperPort™ 11SE gives several ways to view items: Desktop View displays the item in the chosen folder with a thumbnail (a small graphic that shows each item in a desktop or folder) or an icon.You can see both PaperPort™ 11SE items (MAX files) and non-PaperPort...

Scanning 51 2 Organizing your items in folders 2 PaperPort™ 11SE has an easy-to-use filing system for organizing your items. The filing system consists of folders and items that you choose to view in Desktop View . An item can be a PaperPort™ 11SE item or a non-PaperPort™ 11SE item: „ Folders are ar...

Scanning 52 2 You can import items from other applications 2 As well as scanning items, you can bring items into PaperPort™ 11SE in a variety of ways and convert them to PaperPort™ 11SE (MAX) files in several different ways: „ Print to the Desktop View from another application, such as Microsoft ® E...

53 3 3 Note • The features available to you in ControlCenter3 may vary depending on the model number of your machine. • If your PC is protected by a firewall, and is unable to use ControlCenter3 functions, you may need to configure the firewall settings. For more information, see Firewall settings (...

ControlCenter3 54 3 Modern 3 Classic 3 Note • To be able to choose another connected model from the Model drop-down list, you must have the MFL-Pro Suite Software installed on your PC for that model. • For the Modern user interface, you need to install Adobe Flash Player 8 or greater. If you do not ...

ControlCenter3 55 3 b From the SKIN SELECT dialog, you can choose your preferred user interface. Turning the AutoLoad feature off 3 Once you start ControlCenter3 from the Start menu, the icon will appear on the tasktray. You can open the ControlCenter3 window by double-clicking the icon. If you do n...

ControlCenter3 56 3 „ File Lets you scan directly to a disk file. You can change the file type and destination folder, as needed. ControlCenter3 gives you the ability to configure the hardware Scan key on your machine and the ControlCenter3 Software button for each scan feature. To configure the har...

ControlCenter3 57 3 PC-FAX (MFC models only) 3 These buttons are for sending or receiving faxes using the Brother PC-FAX application. „ Send Lets you scan a page or document and automatically send the image as a fax from the PC using the Brother PC-FAX software. (See PC-FAX sending on page 89.) „ Re...

ControlCenter3 58 3 SCAN 3 There are four scan options: Scan to Image , Scan to OCR , Scan to E-mail and Scan to File applications. Note You can configure your machine’s Scan key for each ControlCenter3 button in the Device Button tab. To change the machine’s Scan key settings, right-click each Cont...

ControlCenter3 61 3 E-mail 3 Scan to E-mail lets you scan a document to your default E-mail application, so you can send the scanned job as an attachment. To change the default E-mail application or attachment file type, right-click the E-mail button, click ControlCenter Configuration and click the ...

ControlCenter3 64 3 Customizing a user-defined button 3 To configure a button, right-click the button, then click the ControlCenter Configuration button to see the configuration window. Scan to Image 3 „ General tab To create the button name, enter a name in the Please enter a name for the Custom Bu...

ControlCenter3 68 3 PHOTOCAPTURE 3 Note MFC-230C doesn’t support CompactFlash ® , Memory Stick ® , Memory Stick Pro™, MultiMediaCard™, SecureDigital™ or xD-Picture Card™. These buttons can be used to open or copy files and folders from a USB Flash memory drive or a memory card installed in the machi...

ControlCenter3 69 3 Creating the Copy Folder 3 „ Create a new folder based on the PCC files Date or Month The default setting is Date . A folder is created with a name derived from the date the original file was created. The file is then saved into this folder. For example, a file created on the mem...

ControlCenter3 70 3 FaceFilter Studio 3 The FaceFilter Studio button lets you copy the files on a USB Flash memory drive or memory card and launch the FaceFilter Studio application. FaceFilter Studio gives you an easy-to-use borderless photo printing function. You can also add photo effects such as ...

ControlCenter3 71 3 Creating the Copy Folder 3 „ Create a new folder based on the PCC files Date or Month The default setting is Date . A copy folder is created with a name based on the date that the original file was created. The copy is then saved into this folder. For example, the copy of an orig...

ControlCenter3 74 3 PC-FAX (MFC models only) 3 The PC-FAX option lets you send and receive faxes. You can also configure the address book and change some general machine settings. Send 3 The Send button lets you scan a document and automatically send the image as a fax from the PC using the Brother ...

ControlCenter3 75 3 Receive/View Received(Not available for MFC-230C) 3 The Brother PC-FAX Receiving software option lets you view and store your faxes on your PC. It is automatically installed when you install the MFL-Pro Suite. By clicking the Receive button, the PC-FAX receiving is activated and ...

ControlCenter3 76 3 Address Book 3 The Address Book button lets you add, amend or delete contacts from your address book. To edit this button, click the Address Book button to open the dialog box. (See Brother Address Book on page 96.) Setup 3 By clicking the Setup button, you can configure the user...

ControlCenter3 77 3 DEVICE SETTING 3 In the Device Settings option, you can configure the machine settings or check ink levels. Remote Setup(Not available for DCP models and MFC-230C) 3 The Remote Setup button lets you open the Remote Setup Program window to configure the machine setting menus. Note...

ControlCenter3 78 3 Quick-Dial (Not available for DCP models and MFC-230C) 3 The Quick-Dial button lets you open the Set Quick-Dial window in the Remote Setup Program. You can then easily register or change the Quick-Dial numbers from your PC. Ink Level 3 The Ink Level button opens the Status Monito...

79 4 4 To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can set or change the address settings from the control panel (See Control Panel Setup in the Network User’s Guide) or by using the BRAdmin Light software. If you installed the machine following...

Network Scanning (For models with built-in network support) 82 4 d Click the Scan To Button tab and enter your PC name in the Display Name field. The machine’s LCD displays the name you enter. The default setting is your PC name. You can enter any name that you like. e If you want to avoid receiving...

89 6 6 Note If you are using Windows ® XP or Windows ® 2000 Professional, you must log on with Administrator rights. PC-FAX sending 6 The Brother PC-FAX feature lets you use your PC to send an application or document file as a standard fax. You can send a file created in any application on your PC a...

Brother PC-FAX Software (MFC models only) 90 6 b Enter this information to create the fax header and cover page. c Click OK to save the User Information . Note You can set up the User Information separately for each Windows ® account. Sending setup 6 From the Brother PC-FAX Setup dialog box, click t...

Brother PC-FAX Software (MFC models only) 91 6 Simple style 6 Facsimile style 6 Setting up a cover page 6 From the PC-FAX dialog box, click the icon to access the PC-Fax Cover Page setup screen. The Brother PC-FAX Cover Page Setup dialog box appears:

Brother PC-FAX Software (MFC models only) 94 6 Sending a file as a PC-FAX using the Simple style user interface 6 a Create a file in any application on your PC. b Click File , then Print . The Print dialog box appears: c Choose Brother PC-FAX as your printer, and then click Print . The Simple style ...

Brother PC-FAX Software (MFC models only) 95 6 Address Book 6 If Outlook, Outlook Express or Windows Mail is installed on your PC, you can choose in the Address Book which address book to use for PC-FAX sending. There are four types: Brother Address Book, Outlook, Outlook Express or Windows Mail Add...

Brother PC-FAX Software (MFC models only) 97 6 Speed Dial setup 6 From the Brother PC-FAX Setup dialog box, click the Speed Dial tab. (To use this feature, you must choose the Facsimile style user interface.) You can register a member or group on each of the ten Speed Dial buttons. Registering an ad...

Brother PC-FAX Software (MFC models only) 99 6 Exporting the Address Book 6 You can export the whole Address Book to an ASCII text file (*.csv). You can also choose and create a Vcard that can be attached to a member’s outgoing E-mail. (A Vcard is an electronic business card that contains the sender...

Brother PC-FAX Software (MFC models only) 100 6 Importing to the Address Book 6 You can import ASCII text files (*.csv) or Vcards (electronic business cards) into your Address Book. Importing an ASCII text file 6 a Do one of the following: „ From the Address Book, click File , Import , then Text . „...

Brother PC-FAX Software (MFC models only) 101 6 PC-FAX receiving (Not available for MFC-230C) 6 Note • See Troubleshooting and Routine Maintenance of the User’s Guide or visit the Brother Solutions Center (http://solutions.brother.com) for more information. • To use PC-FAX receiving with a Windows ®...

Brother PC-FAX Software (MFC models only) 102 6 b Press a or b to choose Fax , Advanced Fax Operation , Fwd/Page/Store and PC Fax Receive . Press OK . c Press a or b to choose <USB> or your PC name if connected on a network. Press OK . d Press a or b to choose Backup Print:On or Backup Print:O...

Brother PC-FAX Software (MFC models only) 103 6 c In File Format , choose .tif or .max as the received document format. The default format is .tif . d To play wave files (.wav sound files) when receiving a fax, check Play wave file when receiving FAX , and enter the path of the wave file. e To autom...

Brother PC-FAX Software (MFC models only) 104 6 Specify your PC name You can specify the PC name that will appear on the display of the machine. To change the name, enter the new name in Display Your PC Name . Viewing new PC-FAX messages 6 Each time your PC is receiving a PC-FAX, the icon will alter...

105 7 7 CAUTION DO NOT start your PC with a memory card installed in the media drive of the machine. You could lose your data or damage the card. Note • The PhotoCapture Center ® will read only the media that was put in first. • MFC-230C doesn’t support CompactFlash ® , Memory Stick ® , Memory Stick...

PhotoCapture Center ® 106 7 When you take out a memory card, do the following to prevent damage to the memory card: 7 a In Windows ® Explorer, right-click the removable disk icon and choose Eject . b Wait until the ( PhotoCapture ) key stops blinking before taking out the media. CAUTION DO NOT unplu...

108 8 8 Before using the Brother software 8 Firewall settings on your PC may reject the necessary network connection for network printing, network scanning and PC Fax. If you are using the Windows ® Firewall and you installed MFL-Pro Suite from the CD-ROM, the necessary Firewall settings have alread...

Firewall settings (For Network users) 110 8 For Windows Vista™ users 8 a Click the Start button, Control Panel , Network and Internet , Windows Firewall and click Change settings . b When the User Account Control screen appears, do the following. „ Users who have administrator rights: Click Continue...

Section II Apple ® Macintosh ® I I Printing and Faxing 113 Scanning 121 ControlCenter2 134 Network Scanning (For models with built-in network support) 150 Remote Setup & PhotoCapture Center ® 156

113 9 9 Setting up your USB-equipped Apple ® Macintosh ® 9 Note Before you can connect the machine to your Macintosh ® , you must buy a USB cable that is no longer than 6 feet (2 meters). Improper Setup DO NOT connect the machine to a USB port on a keyboard or a non-powered USB hub. Simultaneous pri...

Printing and Faxing 115 9 Using the Brother Ink driver 9 Choosing page setup options 9 a From an application such as Apple ® TextEdit, click File , then Page Setup . Make sure MFC-XXXX (where XXXX is your model name) is chosen in the Format for pop-up menu. You can change the settings for Paper Size...

Printing and Faxing 116 9 Choosing printing options 9 To control special printing features, choose Print Settings in the Print dialog box. You can choose the Quality , Slow Drying Paper , Media Type , Color/Grayscale , Paper Thickness , Bi-Directional Printing , Mirror Printing and Reverse Printing ...

Printing and Faxing 119 9 e Enter a fax number in the Input Fax Number box, and then click Print to send the fax. Note If you want to send a fax to more than one number, click Add after entering the first fax number. The destination fax numbers will be listed in the dialog box. Drag a Vcard from the...

121 10 10 Scanning from a Macintosh ® 1 0 The Brother machine software includes a TWAIN Scanner driver for Macintosh ® . You can use this Macintosh ® TWAIN Scanner driver with any applications that support TWAIN specifications. When you scan a document, you can either use the ADF (automatic document...

Scanning 122 10 b Adjust the following settings, if needed, in the Scanner Setup dialog box: „ Resolution „ Scan Type „ Scanning Area „ Document Size „ Brightness „ Contrast c Click Start . When scanning has finished, the image appears in your graphics application. Pre-Scanning an image 1 0 The PreS...

Scanning 123 10 Settings in the Scanner window 1 0 Resolution 1 0 You can change the scanning resolution from the Resolution pop-up menu. Higher resolutions take more memory and transfer time, but produce a finer scanned image. The following table shows the resolutions you can choose and the availab...

Scanning 124 10 Scanning Area 1 0 Choose one of the following sizes: „ A4 210 × 297 mm „ JIS B5 182 × 257 mm „ Letter 8.5 × 11 in. „ Legal 8.5 × 14 in. „ A5 148 × 210 mm „ Executive 7.25 × 10.5 in. „ Business Card To scan business cards, choose the Business Card size (90 × 60 mm), and then put the b...

Scanning 125 10 Adjusting the Image 1 0 „ Brightness Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average, and is usually suitable for most images.You can set the Brightness level by dragging the slide bar to the right or left to lighten or darken the...

Scanning 131 10 Using Presto! ® PageManager ® 1 0 Presto! ® PageManager ® is an application for managing the documents in your Macintosh ® . Since it is compatible with most image editors and word processing programs, Presto! ® PageManager ® gives you unmatched control over your Macintosh ® files. Y...

Scanning 132 10 Technical support 1 0 For USA Company name: Newsoft America Inc. Postal Address: 4030 Clipper Court Fremont, CA 94538, U.S.A. Telephone: 510-445-8616 Fax: 510-445-8601 E-mail Address: [email protected] URL: http://www.newsoftinc.com For Canada E-mail Address: [email protected] German...

Scanning 133 10 Italy Company name: 5CA Postal Address: Not Open Telephone: 0899399878 E-mail Address: [email protected] URL: http://it.newsoft.eu.com Spain Company name: 5CA Postal Address: Not Open Telephone: 0807505598 E-mail Address: [email protected] Other countries E-mail Address: [email prote...

134 11 11 Note The features available to you in ControlCenter2 may vary depending on the model number of your machine. Using ControlCenter2 1 1 ControlCenter2 is a software utility that lets you quickly and easily access your often used applications. Using ControlCenter2 eliminates the need to manua...

ControlCenter2 136 11 CUSTOM SCAN 1 1 You can configure the button name and settings for each of these buttons to meet your specific needs by clicking a button while holding down the Ctrl key and following the configuration menus. COPY / PC-FAX 1 1 COPY - Lets you use your Macintosh ® and any printe...

ControlCenter2 140 11 E-mail 1 1 The Scan to E-mail feature lets you scan a document to your default E-mail application, so you can send the scanned job as an attachment. To change the default E-mail application or attachment file type, click the button while holding down the Ctrl key and choose the...

150 12 12 If you want to scan from the machine on a network, you must choose the networked machine in the Device Selector application located in Macintosh HD / Library / Printers / Brother / Utilities / DeviceSelector or from the Model pop-up menu in the main screen of ControlCenter2. If you have al...

156 13 13 Remote Setup (Not available for DCP models and MFC-230C) 1 3 The Remote Setup application lets you configure many machine settings from a Macintosh ® application. When you access this application, the settings on your machine will be downloaded automatically to your Macintosh ® and display...

Remote Setup & PhotoCapture Center ® 157 13 Note • To save a setting, highlight setting (for example, Set Quick-Dial ) from the setting list then click Export . Each setting you export is saved as a single file. • If you need to change the machine that was registered to your Macintosh ® during t...

Remote Setup & PhotoCapture Center ® 158 13 PhotoCapture Center ® 1 3 You can access a USB Flash memory drive or a memory card installed in the machine from a Macintosh ® . CAUTION DO NOT start your Macintosh ® with a USB Flash memory drive or a memory card installed in the media drive of the ma...

Index 161 A A C ControlCenter2 Macintosh ® .......................................................... 134 ControlCenter3 Windows ® .............................................................. 53 D Device Selector ...................................... 121 , 150 , 157 Drivers Macintosh ® Brother In...

Brother International Corporation 100 Somerset Corporate Boulevard P.O. Box 6911 Bridgewater, NJ 08807–0911 USA Brother International Corporation (Canada) Ltd. 1 rue Hôtel de Ville, Dollard-des-Ormeaux, QC, CANADA H9B 3H6 Visit us on the World Wide Web http://www.brother.com These machines are made ...