Brother KE-484C- Manual
Brother KE-484C– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Superb ease of operation greatly increases working efficiency; Abore the work table
- Page 3 – Improved productivity; Options
- Page 4 – Specifications; Model
Electronic lockstitch pattern tacker with treble hook
Attractive and accurate sewing finishes for extra-heavy materials
This electronic pattern tacker is ideal for sewing heavy and
extra-heavy materials such as seatbelts. It gives excellent
economy, with shorter cycle times and easier maintenance.
KE-484C
•
Knife method cuts even extra thick threads
accurately.
•
Pneumatic drive wipes the thread smoothly.
•
Stable thread tension release improves
sewing performance.
•
Stitch patterns can be changed easily.
A variety of thread types up to #0 can be cut accurately.
•
A knife method is used for thread trimming. When the knives are
meshing, the movable knife and fixed knife are driven by a
pneumatic cylinder. Extra thick threads of up to #0 can be cut
accurately regardless of the material of the thread.
•
The speed of the knife is controlled by a pneumatic cylinder
which reduces excessive spinning of the bobbin during thread
trimming. The thread is held securely from the start of sewing so
that stable seams are created.
•
Unlike the heat cutting method, the knife method does not require a heater to be warmed up, so it
reduces cycle time. It also saves electricity costs and makes temperature control unnecessary. In
addition, the knives are much more durable than the heater wires, so that the knives can accurately cut a
greater variety of threads. They are also easier to maintain.
•
The thread wiper is also driven by a pneumatic cylinder. The upper thread can be wiped accurately even
under conditions where the thread is difficult to pull out of the material.
Optimized thread tightening creates attractive sewing finishes.
A pneumatically-driven thread tension release mechanism has been adopted. Compared to cam-type
methods, this mechanism provides much stronger thread tension. In addition, the thread tension discs
open and close accurately even when high tensions are applied to the upper thread, so that the upper
thread trailing length is kept at a constant length and problems at the sewing start are prevented. Stable
and accurate thread tightening is provided even under high load conditions, so that good thread tightening
can be obtained even when sewing through several layers of material, thereby increasing the range of
sewing applications. Plus, a new thread take-up mechanism ensures that the thread tightening is optimum
for the material being sewn.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Brother KE-484C
Summary
Attractive and accurate sewing finishes for extra-heavy materials Superb ease of operation greatly increases working efficiency Increased material penetration force The adoption of an inside motor allows the operator to easily increase the torque to the optimum level for the article being sewn simpl...
Reduced bobbin replacement frequency The triple capacity rotary hook allows 3 times the lower thread to be wound on compared to standard bobbin. This reduces the frequency of bobbin changes and also reduces overall cycle time. Excellent durability Bearing brackets have been adopted as the needle bar...
R 15-1,Naeshiro-cho,Mizuho-ku,Nagoya 467-8561, Japan.Phone:81-52-824-2177 Fax:81-52-811-7789 http://www. brother. com/ Product specifications are subject to change for improvement without notice. Please read instruction manual before using the machine for safety operation. Printed in Japan 2003.4. I...
