Brother HL-600 Series- User Manual
Brother HL-600 Series– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Action 2: Install the Toner Cartridge / Drum Unit; NOTE; Install the drum unit into the printer.
- Page 3 – CAUTION; marks are
- Page 4 – Action 3: Load Paper into Your Printer; Install the sheet feeder into the printer. (; Move the paper guide to fit the paper width.
- Page 6 – Action 4: Connect Your Printer and Computer
- Page 7 – Action 5: Plug in and Turn on Your Printer
- Page 8 – Remove the drum unit.
1
Brother Laser Printer HL-600 Series Quick Setup Guide
Read this guidebook first to set up your printer.
Action 1: Getting Started
Check the Supplied Items
After taking the printer out of the carton and removing the packing materials, make sure that
the following items are not damaged and none are missing:
• Printer
• Multi-purpose sheet feeder
• Drum unit
• Toner cartridge
•
3.5” floppy disks for DOS/Windows
®
•
Software setup guide
•
Quick setup guide (this guidebook)
•
User’s guide
•
Plastic Bag
NOTE
The 3.5” floppy disks for the Macintosh printer driver is included in some countries.
You will need to purchase an interface cable that matches the interface of your computer. If
you do not know what cable you need, consult your dealer.
The product names in this guidebook are trademarks or registered trademarks of each manufacturer. The specifications are subject to change without notice.
© 1994 Brother Industries, Ltd.
UL5455001 C Printed in Japan
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Action 2: Install the Toner Cartridge / Drum Unit 1 Unpack the drum unit and gently rock itfrom side to side five or six times. 2 Remove the protective parts, in order, asshown in the illustration. NOTE Do not expose the drum unit to light forlonger than a few minutes, as this willdamage the drum....
3 5 Unpack the toner cartridge and gently rockit from side to side five or six times beforeinstalling. ( ① ) Then, remove the protective parts.( ② ) CAUTION DO NOT MOVE THE SHUTTER LEVERUNTIL THE CARTRIDGE ISINSTALLED. 6 Install the toner cartridge into the drumunit. Make sure that the ▲ marks are a...
4 Action 3: Load Paper into Your Printer 1 Install the paper support into the multi-purpose sheet feeder. ( ① ) Install the sheet feeder into the printer. ( ② ) 2 Open the multi-purpose sheet feeder cover. 3 Load paper in the multi-purpose sheetfeeder. NOTE The feeder can hold up to 200 sheets ofpla...
