Brother HL-5070N Series- User Manual

4 ■ Getting Started Carton components may differ from one country to another.Save all packing materials and the printer carton. Carton Components Printer CD-ROM (including User's Guide) Quick Setup Guide Drum Unit Assembly (including Toner Cartridge) AC Power Cord ■ The interface cable is not a stan...

5 Printer LED Indications : Blinking : ON : OFF *1 The LED will blink in a pattern of ON for 2 seconds and then OFF for 3 seconds. *2 The LED will blink fast. Control Panel 1 Toner LED indicates when the Toner is low or empty. 2 Drum LED indicates when the Drum is nearing end of life. 3 Paper LED in...

7 Setting Up Your Printer Do NOT connect the interface cable.Connecting the interface cable is done when installing the driver. 1 Insert the CD-ROM into your CD-ROM drive. The opening screen will appear automatically. Follow the on-screen instructions. 2 Click the Initial Setup icon on the menu scre...

8 Setting Up Your Printer Do NOT connect the interface cable.Connecting the interface cable is done when installing the driver. 1 Open the front cover by pressing the front cover release button. 2 Unpack the drum unit assembly.Remove the protective part. 3 Rock it from side to side several times to ...

9 1 Pull the paper tray completely out of the printer. 2 While pressing the paper guide release lever, slide the adjusters to fit the paper size. Check that the guides are firmly in the slots. 3 Fan the stack of paper well to avoid paper jams and misfeeds. 4 Put paper in the paper tray.Check that th...

10 Setting Up Your Printer Do NOT connect the interface cable.Connecting the interface cable is done when installing the driver. 1 Make sure that the printer power switch is off. Connect the AC power cord to the printer. 2 Plug the AC power cord into an AC outlet.Turn the power switch on. 3 After th...

11 S e tt ing U p Yo ur Pr in te r W indow s ® USB W indow s ® P a ra lle l W indow s ® Ne tw o rk M a ci nt osh ® USB M a ci nt osh ® Ne tw o rk Fo r Ad m ini st ra to rs Installing the Driver Follow the instructions on this page for your operating system and interface cable.The screens for Windows...

12 Installing the Driver 1. Installing the Driver and Connecting the Printer to Your PC 1 Make sure the USB interface cable is NOT connected to the printer, and then begin installing the driver. If you have already connected the cable, remove it. 2 Click Connect the interface cable & Install the...

13 6 When this screen appears, make sure the printer power switch is on. Connect the USB interface cable to your PC, and then connect it to the printer. Click the Next button. 7 Click the Finish button. For Windows ® 98 / Me users: The Setup is now complete. For Windows ® 2000/XP users: Go to "2...

14 Installing the Driver Connecting the Printer to Your PC and Installing the Driver 1 Click Connect the interface cable & Install the driver/utility from the Initial Setup menu. 2 Select the Parallel interface . 3 Turn off the printer power switch. 4 Connect the parallel interface cable to your...

16 Installing the Driver Connecting the Printer to Your Network and Installing the Driver 1 Click Connect the interface cable & Install the driver/utility from the Initial Setup menu. 2 Select the Network interface . 3 Turn off the printer power switch. 4 Connect the network interface cable to t...

20 Installing the Driver Installing the Driver, Connecting the Cable and Selecting the Appropriate Printer Queue or 'Share name' 1 Click Connect the interface cable & Install the driver/utility from the Initial Setup menu. 2 Select the Network interface . 3 Turn off the printer power switch. 4 C...

22 Installing the Driver 1. Connecting the Printer to your Macintosh & Installing the Driver 1 Make sure the printer power switch is on. 2 Connect the USB interface cable to your Macintosh, and then connect it to the printer. 3 Click Connect the interface cable & Install the driver/utility f...

24 Installing the Driver 2. Setting your Printer as the Default Printer 1 Click the HL-5070N series icon on the Desktop. 2 Select Set Default Printer from the Printing menu. The setup is now complete. For USB Interface Cable Users For Mac ® OS 8.6 to 9.2 Users Step 2

27 Connecting the Printer to your Macintosh & Installing the BR-Script PPD File 1 Click Connect the interface cable & Install the driver/utility from the Initial Setup menu. 2 Select the Network interface . 3 Turn off the printer power switch. 4 Connect the network interface cable to the pri...

31 ■ For Administrators This section is for using the printer on a network. An administrator should set up the printer using the following steps. Network User's Guide Chapter Map Windows ® 95/98/ME Peer-to-Peer TCP/IP Chapter 3 Peer-to-Peer Printing NetBIOS Chapter 4 NetBIOS Peer-to-Peer Printing Br...

34 ■ Other Information If for any reason you must ship your Printer, carefully package the Printer in the original packing to avoid any damage during transit. It is strongly recommended that you save and use the original packaging. The Printer should also be adequately insured with the carrier. When...

35 The printer has the following optional accessories. You can expand the capabilities of the printer by adding these items. Options User's Guide Chapter 4. Lower Tray Unit DIMM Memory LT-5000 Second lower paper tray unit expands total input capacity up to 250 sheets. You can expand the memory by in...