Brother BE-0901-PC - Manual
Brother BE-0901-PC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – It may ask you if you want to save the design previously loaded.; Left click on your selection.
- Page 3 – Loading a DST file; Explorer icon
- Page 6 – Loading embroidery hoop to use; Settings
- Page 9 – Setting color sequence; Left click on the “Needle Bar Change” icon.; Needle Bar Change icon
- Page 10 – color of the design to sew needle 12, you click and drag the
- Page 12 – Setting sewing speed; Range”. Left click on the “Down” button to adjust if needed.; Speed adjustment buttons
- Page 13 – Sending design to the machine; finished on the computer.; Send icon
- Page 14 – Operations on the machine panel; The “Ready” light should be on if the design was sent to the machine.
Machine Reference
Title:
Procedures for sewing a DST file using PC
Date:
February 4, 2009
Models:
BE-0901-PC, BE-1201-PC, BE-1204-PC, BE-1206-PC
BES-960, BES-962, BES-1240, BES-1260, BES-1262
Preparation
1. Turn on the computer and start the Brother Embroidery Software, ECSC.
(Note: You will not see a white window appear until you turn on the machine.)
2. Turn on the Brother embroidery machine.
(Note: White window will appear.)
3. If using a USB flash drive or floppy disk please insert in to the computer.
Cancelling previous design
1. Left click on the Embroidery Cancel icon.
Embroidery Cancel icon
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2. It may ask you if you want to save the design previously loaded. (This will save the design in an ECS format) Save – Save design without being able to change the file name. Save as – Save design with being able to change the file name. No – Will not save the design Left click on your selection.
Loading a DST file 1. Left click on the Explorer icon. 1. Left click on the drive or folder containing the DST file you want to read in. In this example the 3½ Floppy (A) is being used. Explorer icon
Loading embroidery hoop to use (Note: If using some aftermarket hoops, such as a FastFrame, this step is optional.) 1. 1. 1. 1. Left click on Left click on Left click on Left click on “Settings”. “Settings”. “Settings”. “Settings”. 2. 2. 2. 2. Left click on “Load Hoop”. Left click on “Load Hoop”. Le...
