Page 2 - INTRODUCTION; Stamp; FCC NOTICE
INTRODUCTION Thank you for purchasing the P-touch 1800/1810!Your new P-touch will allow you to create labels and stamps for any need. Its versatilityenables you to design custom labels by choosing from a variety of frame designs and frommany characters sizes and styles. In addition, the four tape wi...
Page 3 - CONTENTS; Getting Started
i CONTENTS Getting Started GENERAL DESCRIPTION..................................................................................... 2GENERAL PRECAUTIONS ................................................................................... 4BATTERIES .......................................................
Page 6 - GENERAL DESCRIPTION; TOP VIEW
2 GENERAL DESCRIPTION TOP VIEW BOTTOM VIEW Tape compartmentcover LCD display Keyboard Tape cutter lever AC adaptorconnector Tape exit slot Battery compartment cover
Page 7 - KEYBOARD & LCD DISPLAY
3 KEYBOARD & LCD DISPLAY Frame Underline Length Auto Font 1 Font 2 ¡ ¿ é ú " Ç ç Ñ ñ - ' ü í ó á Alt Feed Tab Caps Mirror Font Size Width Style Underline Frame Memory Line out Clear Symbol Accent Tab Length Tape Align Length A.Format Stamp Repeat Number Home End Store Recall M.Del Off Space ...
Page 8 - GENERAL PRECAUTIONS; Use six AA alkaline batteries in this machine.
4 GENERAL PRECAUTIONS • Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. • Do not pull on the tape being fed from the P-Touch. This may damage the tape cas-sette. • Do not use the machine in dusty places, and keep it out of both direct sunlight andrain. • Do n...
Page 9 - BATTERIES; AA; To change the batteries:
5 BATTERIES This lightweight and portable machine can be used anywhere by installing six (6) AA alkaline batteries . When you change the batteries, always replace all six at the same time. To change the batteries: 1 Remove the battery compartment cover on the back of the machine. 2 If batteries are ...
Page 10 - OPTIONAL AC ADAPTOR; To connect the optional AC adaptor:
6 OPTIONAL AC ADAPTOR The AC adaptor (model AD-60) allows you to use this machine wherever there is an elec-trical outlet. To connect the optional AC adaptor: 1 Insert the plug on the adaptor cord into the connector marked DC IN 9.5V on theright side of the machine. 2 Insert the plug on the adaptor ...
Page 11 - TAPE CASSETTE; To change the tape cassette:
7 TAPE CASSETTE A single TZ tape cassette is supplied with this unit. However, since TZ tape cassettes areavailable for this machine in a wide variety of colors and sizes, it is possible to make dis-tinctive color-coded and stylized labels. In addition, this machine has been designed to allow you to...
Page 12 - ATTACHING LABELS; LAMINATED TAPE; FABRIC TAPE
8 ATTACHING LABELS LAMINATED TAPE The enclosed stick enables you to easily remove the backing from labels printed on lami-nated tapes. 1 Hold the tape in your left hand, with the printed surface facing up, and hold thestick in your right hand. 2 Pass the tape halfway through the long narrow hole in ...
Page 13 - To clean the print head and rollers:
9 PRINT HEAD & ROLLERS Occasionally, specks of dust or dirt become attached to the machine’s print head androllers. This is particularly likely when you are using the unit outdoors or in a very dustyenvironment. If a section of the print head is covered with dust, a blank horizontal streakmay ap...
Page 16 - DOOR LABEL EXAMPLE; To turn on the machine:; A B C D E F G H I J K L
12 DOOR LABEL EXAMPLE After you have inserted the batteries and the enclosed tape cassette as explained in theGetting Started chapter, let’s practice using some of the basic functions of your P-touch.We must first begin by turning on the power to the machine. The underline in the LCD display is call...
Page 17 - ENTERING THE TEXT; To type in “MEETING”:
13 ENTERING THE TEXT Since all of the text will be in capital letters, we will use the Caps mode, which allows us to type capital letters continuously without holding down . Then, let’s type in the text in the same way that you would type on a typewriter or a com-puter keyboard. Also like on a typew...
Page 18 - once. The Caps indicator; E T I N G R O O M _
14 Type the second word, “ROOM”, to finish the text. Now that we are finished entering capital letters, we can exit Caps mode. Once you have entered the text, you can easily edit it by correcting mistakes or simply adjust-ing it or its format. For detailed explanations of text editing methods, see p...
Page 19 - PRINTING THE TEXT; To print the door label:; To cut off the door label:; C O P I E S
15 PRINTING THE TEXT Several format settings are available, however, in this example we will use the default set-tings pre-programmed into the machine and print out our label. To print the door label: 7 Press once. The message “COPIES 1/1” appears while thelabel is being printed. To cut off the door...
Page 20 - ADDRESS LABEL EXAMPLE; To erase all of the text and reset the format functions:
16 ADDRESS LABEL EXAMPLE While making the multi-line address label in this example, we will learn how to createmore decorative labels using the various format settings. ☞ Three-line labels, such as this address label, can only be printed on either 1/2”(12-mm)- or 3/4” (18-mm)-wide tape. Before enter...
Page 21 - To type in “Bill Reynolds”:; To end the first line and begin another one:; O K T O; R e y n o l d s _
17 ENTERING THE TEXT Let’s begin by typing in the first row of text, the name “Bill Reynolds”. In a multi-line label, the return key ( ) is used to end one line and start the next one. The return mark ( ) indicates the end of the line. To type in “Bill Reynolds”: 3 Hold down and press once, then rel...
Page 22 - FORMATTING THE TEXT; To type in the address:; 9 S o u t h M a; H E L S I N K I
18 Now, we can enter the address: 29 South Main St.; Los Angeles, CA 88888. FORMATTING THE TEXT Now the text has been entered entered as we wish. If it were printed, the standard defaultsettings would be used. The text would be aligned on the left side with 1 ″ (25 mm) mar- gins and would not be fra...
Page 23 - B R U S S E L S; O F F; R O U N D
19 0 While still holding down , continue pressing until BRUSSELS is dis- played, and then release . To select the ROUND frame setting: A While holding down , press once, and keep held down to display the current frame setting. B While still holding down , continue pressing until ROUND is displayed, ...
Page 24 - To print three copies of the label:; U N T I L 1 – 9 ?; U N T I L 3
20 Different format settings can be chosen either before or after the text is entered. The pro-cedure shown above can be used to change the other format settings. PRINTING THE TEXT If we want only one copy of the text, we could just press to print it. However, let’s assume that we have three letters...
Page 28 - POWER KEY; To turn off the machine:
24 POWER KEY The power key ( ) is located in the top right-hand corner of the keyboard. If bat- teries have been installed or the machine has been plugged in using the optional ACadaptor, the previous session’s information is displayed when the machine is turned on.This feature allows you to stop wo...
Page 29 - CURSOR KEYS
25 CURSOR KEYS The machine’s LCD display shows two rows of 11 characters; however, the text that youcreate can be up to 99 characters long. You can review and edit your text by using thecursor keys to move the cursor so that different parts are shown in the display. LEFT CURSOR KEY To move the curso...
Page 31 - EXAMPLE; Ü Æ æ Ã ã Ë ë Õ õ
27 CODE, ALT & SHIFT KEYS Most characters can be entered simply by pressing their keys. However, to use specialfunctions or to enter capital letters, accented characters and some symbols, the followingspecial keys are necessary. CODE KEY To use a function printed above a key: ● Hold down and pre...
Page 32 - L E N G T H i n c h
28 ALT KEY To type in characters printed in color on the right-hand side of the keys: ● Hold down and press the key of the desired character written in color. The Alt indicator on the left side of the display lights up while is held down. EXAMPLE To type in “–”: ● Hold down and press once. The Alt i...
Page 34 - SPACE KEY
30 SPACE KEY The Space key ( ) lets you add blank spaces between characters in your text. It is different from the right cursor key ( ), which just moves the cursor without adding blank spaces.To add a space: ● Press . EXAMPLE To add a space: ● Press . Feed Feed 1: J . _ A B C D E F G H I J K L Alt ...
Page 35 - RETURN KEY; To select an item from a list:
31 RETURN KEY Like on a typewriter or word processor, this machine’s return key ( ) is used to end a line of text and start another one. When you have finished entering one line, pressthe return key to make a new line and move the cursor to it. ☞ A single block can only contain a maximum of three te...
Page 36 - TAB FUNCTION; To set the tab length:; J K L M N O P Q R S T U
32 TAB FUNCTION This function allows you to separate sections of a line of text by adding tabs. This enablesyou to create perfectly aligned columns without having to type in several spaces. All tabshave the same length and are measured from either the beginning of the line or the previ-ous tab if th...
Page 37 - J K L M N O P Q R S T U
33 the label shown below will be printed EXAMPLE To set the tab length to 1”: 1 Hold down and press once. 2 Press until 1.0 is displayed. 3 Press . To add a tab: ● Hold down and press once. J K L M N O P Q R S T U A B C D E F G H I Margin Tab (2 inch) Tab (2 inch) Margin Alt Caps Frame Underline Len...
Page 38 - DELETE KEY; To delete one character:
34 DELETE KEY The delete key ( ) allows you to remove characters to the left of the cursor’s current position. It differs from the left cursor key ( ), which only moves the cursor without deleting any characters.The delete key can also be used to quit most functions and return to the previous displa...
Page 39 - LINE OUT FUNCTION; To delete a line of text:; S G a r d e n; K ́ s G a r d e n
35 LINE OUT FUNCTION With the Line Out function, you can easily remove an entire line of text. To delete a line of text: 1 Press , , or to position the cursor within the line of text that you wish to delete. 2 Hold down and press once. ☞ Each time is pressed while is held down, one line of text is d...
Page 40 - CLEAR FUNCTION
36 CLEAR FUNCTION When clearing the display before entering new text, the Clear function can be used tochoose whether all of the text is erased and all format functions (Font, Size, Width, Style,Underline, Frame, Tape margin, Alignment, Tab length, Mirror printing, and Length) arereturned to their d...
Page 42 - TEXT ONLY is
38 2 Press until TEXT ONLY is flashing. 3 Press . End Alt Caps Frame Underline Length Auto Font 1 Font 2 T E X T & F O R M A T ST E X T O N L Y Alt Caps Frame Underline Length Auto Font 1 Font 2 1: _
Page 43 - ACCENT FUNCTION; To type in an accented character:
39 ACCENT FUNCTION The Accent function can also be used to add accented characters to your text. Many ofthese characters can also be typed in using the Symbol function. The accented characters are grouped according to the capital or small letter that they arecombined with. The following accented cha...
Page 44 - È É Ë Ê
40 EXAMPLE To add the accented character “É”: 1 Hold down and press . 2 Hold down and press . 3 Press until É flashes. 4 Press . Accent 1: R E S U M _ a - u / A - U ? Alt Caps Frame Underline Length Auto Font 1 Font 2 Caps Tape 1: R E S U M _ È É Ë Ê Alt Caps Frame Underline Length Auto Font 1 Font ...
Page 45 - SYMBOL FUNCTION; Group
41 SYMBOL FUNCTION In addition to the letters, symbols and numerals on the key tops, there are 53 additionalmarks available with the Symbol function.The following symbols are available: To type in a symbol: 1 Hold down and press . A row of symbols appear in the display. 2 Press or to display differe...
Page 46 - ü Æ æ Ã ã Õ õ •
42 EXAMPLE To add the symbol “ ”: 1 Hold down and press . 2 Press or until the row containing “ ” appears, then press or until “ ” flashes. 3 Press . Symbol Alt Caps Frame Underline Length Auto Font 1 Font 2 1: D A N G E R _ ü Æ æ Ã ã Õ õ • ° Home End Alt Caps Frame Underline Length Auto Font 1 Font...
Page 47 - AUTO FORMAT FUNCTION; To select a preset format:
43 AUTO FORMAT FUNCTION With the Auto Format function, you can select from a variety of preset formats perfect foryour specific need. This function automatically adjusts the label length, tape margins andholizontal alignment without changing the text or any other formats, allowing you to cre-ate lab...
Page 49 - STAMP FUNCTION; S T A M P
45 STAMP FUNCTION The Stamp function allows you to quickly and easily create your own stamp stencil filmsfor customized stamps. Select this function to automatically center the text and adjust thetape length and margins to a perfect format for the pre-inked stamp film holders. Since thestamp holder ...
Page 53 - SIZE & WIDTH FUNCTIONS; Tape widths
49 SIZE & WIDTH FUNCTIONS The character size can be adjusted using both the Size and Width functions. Since thecharacter size that can be used depends on the width of the tape, the following tableshows the character sizes that can be used with each tape width. The default size setting is AUTO an...
Page 55 - A U T O; S I Z E
51 EXAMPLE To turn on or off the Width function: 1 While holding down , press once, and keep held down to dis- play the current width setting. 2 While still holding down , continue pressing until the desired width setting is displayed. 3 Release to apply the selected width setting to the entire text...
Page 56 - until ON is; O N
52 EXAMPLE To turn on the Width function: 1 While holding down , press once, and keep held down. 2 While still holding down , continue pressing until ON is displayed. 3 Release . Width O F F W I D E Alt Caps Frame Underline Length Auto Font 1 Font 2 Width O N W I D E Alt Caps Frame Underline Length ...
Page 57 - STYLE FUNCTION; To change the style setting:; N O R M A L
53 STYLE FUNCTION You can choose from nine different character styles to apply to your text. ☞ Characters printed using the smaller sizes may be difficult to read if certain stylesettings (e.g., I+SHADOW) are selected. The following style settings are available: NORMAL I+BOLD (italic & bold) BOL...
Page 58 - S T Y L E
54 2 While still holding down , continue pressing until I+SHADOW is displayed. 3 Release . I + S H A D O W S T Y L E Alt Caps Frame Underline Length Auto Font 1 Font 2 Style
Page 60 - UNDERLINE FUNCTION; To turn on or off the Underline function:; To select the ON underline setting:
56 UNDERLINE FUNCTION You can emphasize your text by underlining it.The default underline setting is OFF. When the Underline function is set to ON, theUnderline indicator on the right side of the display lights up. To turn on or off the Underline function: 1 While holding down , press once, and keep...
Page 61 - FONT FUNCTION; To change the font setting:
57 FONT FUNCTION With the Font function, you can choose one of two fonts for your text.The following font settings are available: HELSINKI and BRUSSELS The default font setting is HELSINKI. The currently selected font setting is always shownby the Font indicators below the display.Refer to Reference...
Page 62 - REFERENCE
58 REFERENCE REFERENCE Font setting Font sample Display indicator HELSINKI Font 1 BRUSSELS Font 2
Page 63 - FRAME FUNCTION; To change the frame setting:; C A N D Y
59 FRAME FUNCTION With the Frame function, you can choose from various frames and highlights to design amore decorative or emphasized label.The following Frame settings are available: OFF, ROUND, CANDY, POINTING, NAMEPLATE, DOT The default frame setting is OFF; however, other settings are also avail...
Page 65 - TAPE MARGIN FUNCTION; To change the tape margin setting:
61 TAPE MARGIN FUNCTION The Tape margin function allows you to adjust the size of the margins on the left and rightsides of your text.The default tape margin setting is FULL; however, three other settings are also available. ☞ After printing a label using the NONE tape margin setting, hold down and ...
Page 66 - until HALF; F U L L; H A L F
62 EXAMPLE To select the HALF tape margin setting: 1 While holding down , press once, and keep held down. 2 While still holding down , continue pressing until HALF is displayed. 3 Release . F E E D Alt Caps F U L L Frame Underline Length Auto Font 1 Font 2 Tape F E E D Alt Caps H A L F Frame Underli...
Page 67 - HORIZONTAL ALIGNMENT FUNCTION; To change the horizontal alignment setting:; To select the RIGHT horizontal alignment setting:; L E F T; R I G H T
63 HORIZONTAL ALIGNMENT FUNCTION You can choose to align the text in one of three ways. In addition, if the Length functionwas used to set the length of the label, the text will align within the label according to theselected horizontal alignment setting.Three settings exist, as follws. The default ...
Page 68 - MIRROR PRINTING FUNCTION; To turn on or off the mirror printing setting:; To select the ON mirror printing setting:
64 MIRROR PRINTING FUNCTION With this function, you can print your text so that the characters can be read from thetape side of the tape. If mirror-printed labels are attached to glass or some other clearmaterial, they can be read correctly from the opposite side. ☞ When using the Mirror printing fu...
Page 69 - LENGTH FUNCTION; To turn on or off the Length function:
65 LENGTH FUNCTION Although the length of the printed label automatically adjusts to fit the length of theentered text, there may be times when you will want to make a label with a specificlength. The Length function allows you to set the label length between 1.6” and 11.8”(4.0 cm and 30.0 cm).The d...
Page 71 - PRINT KEY & FEED FUNCTION
67 PRINT KEY & FEED FUNCTION After you have entered your text and chosen the desired format settings, you are ready toprint. To print a label: ● Press once. The message “COPIES” followed by the number of the label being printed is displayed. ☞ If NONE tape setting is selected and the tape is imm...
Page 72 - NUMBERING FUNCTION; S T U D I O 1
68 NUMBERING FUNCTION This function can be used to print many copies of the same text while increasing a certainnumber in the text by 1 after each label is printed.To use the Numbering function: 1 Press , , or to position the cursor below the number that you wish to increase. 2 Hold down and press ....
Page 74 - REPEAT PRINTING FUNCTION
70 REPEAT PRINTING FUNCTION This function allows you to print up to 9 copies of the same text. To use the Repeat printing function: 1 Hold down and press . The message “COPIES UNTIL 1–9?” appears in the display. 2 Press the number key ( to ) of the number of labels that you want. ☞ To cancel the Rep...
Page 76 - MEMORY FUNCTIONS; STORING TEXT; To store a text file:
72 MEMORY FUNCTIONS You can use the memory to store your most frequently used text files. The text remains inthe memory, even after all characters are removed from the display using the Clear func- tion (holding down and pressing ). When each file is stored, it is given a number to make recalling it...
Page 77 - To overwrite the stored file with the new one:; RECALLING TEXT; To recall a text file:; DELETING A FILE; To delete a text file:
73 To overwrite the stored file with the new one: ● Press to delete the previously stored file and store the new one under the selected number. ☞ To go back and choose another file number without overwriting the text file, press , and then press the key of a different file number. RECALLING TEXT To ...
Page 78 - S E L E C T 1 – 9 ?
74 2 Press the key ( to ) of the file number containing the text that you wish to delete. The text stored under the selected file number is shown. ☞ To see other parts of the selected text file, press or . To display the text stored under other file numbers, press or , or the key of a different file...
Page 79 - To delete the text stored under file number 4:
75 2 Press . 3 Press . To delete the text stored under file number 4: 1 Hold down and press . 2 Press . 3 Press . Alt Caps Frame Underline Length Auto Font 1 Font 2 [ 4 ] J o h n S m i t R E C A L L Style Alt Caps Frame Underline Length Auto Font 1 Font 2 1: J o h n S m i t h _ Alt Caps Frame Underl...
Page 80 - TROUBLESHOOTING; Problem
76 TROUBLESHOOTING Problem Remedy 1. The display stays blank after you have turned on the machine. • Check that the AC adaptor is con- nected correctly. • If you are using alkaline batteries, check that they are correctly inserted. • If the batteries are low, replace them with new ones. 2. The machi...
Page 81 - ERROR MESSAGE LIST; Error Message
77 ERROR MESSAGE LIST Error Message Cause Remedy 3 LINELIMIT! • This message appears if three lines already exist when you press . • Limit the number of lines to three. BATTERIESWEAK! • This message appears when the installed alkalinebatteries become weak. • Replace the batteries or use the AC adapt...
Page 85 - SPECIFICATIONS; HARDWARE
81 SPECIFICATIONS HARDWARE SOFTWARE Input Device: Keyboard - 51 keys LCD: 7 × 5 dots 12 characters × 2 lines 17 indicators Print Tape: Pressure-sensitive, Adhesive-based26’ 3” (8 m) longFour widths available: 1/4” (6 mm) 3/8” (9 mm) 1/2” (12 mm) 3/4” (18 mm) Power Supply: Six AA alkaline batteries (...
Page 86 - ACCESSORIES; Supplies
82 ACCESSORIES ● Supplies Obtain tape cassettes from your nearest authorized dealer. Use only Brother TZ tapes with this machine. Brother cannot be held responsible fortrouble caused by the use of unauthorized supplies. Do not use tapes that do nothave the mark. Stock No. Description QTY/ PACKAGE PR...
Page 89 - P-TOUCH ACCESSORY ORDER FORM
P-TOUCH ACCESSORY ORDER FORM Dear Customer:This order form is provided for your convenience should your retailer not stock theitem(s) needed. To order by mail, send this completed form along with proper payment tothe address below OR credit card holders: Call toll-free 1-888-879-3232, fax completedo...
Page 94 - INTRODUCCIÓN; AVISO DE LA FCC
INTRODUCCIÓN Gracias por adquirir una P-Touch 1800.Su nueva P-Touch le permitirá diseñar y crear etiquetas y membretes para cualquier tipode aplicación. Su versatilidad le permitirá crear etiquetas personales seleccionando dis-tintos diseños de marcos y muchos tamaños y estilos de caracteres. Además...
Page 95 - ÍNDICE
i ÍNDICE PRECAUCIONES GENERALES ............................................................................. 1PILAS ................................................................................................................... 2ADAPTADOR DE CA OPCIONAL ............................................
Page 97 - PRECAUCIONES GENERALES; En esta máquina, emplee seis pilas alcalinas del tamaño AA.
1 PRECAUCIONES GENERALES • Con esta máquina emplee sólo cintas TZ Brother. No emplee cintas que no tengan lamarca . • No tire de la cinta que se alimenta desde la P-Touch. Podría dañar el casete de cinta. • No utilice la máquina en lugares polvorientos, y manténgala alejada de la luz solardirecta y ...
Page 98 - PILAS; pilas; Para cambiar las pilas:
2 PILAS Esta máquina ligera y portátil puede utilizarse en cualquier lugar instalando seis (6) pilas alcalinas AA . Cuando cambie las pilas, reemplace siempre las seis pilas al mismo tiempo. Para cambiar las pilas: 1 Extraiga la cubierta del compartimiento de las pilas de la parte posterior de lamáq...
Page 99 - ADAPTADOR DE CA OPCIONAL; Para conectar el adaptador de CA opcional:
3 ADAPTADOR DE CA OPCIONAL El adaptador de CA (modelo AD-60) le permite emplear esta máquina siempre que dis-ponga de una toma de corriente eléctrica. Para conectar el adaptador de CA opcional: 1 Inserte la clavija del adaptador en el conector que tiene la marca DC IN 9.5V allado derecho de la máqui...
Page 100 - CASETES DE CINTA; Para cambiar el casete de cinta:
4 CASETES DE CINTA Un casete de TZ se suministra con la unidad. Sin embargo, para esta máquina hay dispo-nibles una amplia gama de casetes de cinta TZ de distintos colores y tamaños, es posiblecrear etiquetas diferentes codificadas por colores o tamaños. Para cambiar el casete de cinta: 1 Levante la...
Page 101 - CABEZAL DE IMPRESIÓN Y RODILLOS; Para limpiar el cabezal de impresión y los rodillos:
5 CABEZAL DE IMPRESIÓN Y RODILLOS De vez en cuando, motas de polvo o suciedad se adhieren al cabezal de impresión y alos rodillos de la máquina. Suele suceder cuando se emplea la unidad en exteriores o enlugares con mucho polvo. Si alguna parte del cabezal de impresión está cubierta depolvo, es posi...
Page 102 - COLOCACIÓN DE ETIQUETAS; CINTA LAMINADA; CINTAS DE TELA
6 COLOCACIÓN DE ETIQUETAS CINTA LAMINADA La varilla suministrada permite que, en las cintas laminadas, usted pueda extraer facil-mente el papel del dorso de la etiqueta. 1 Tome la cinta con la mano izquierda, con la superficie impresa arriba, y tome lavarilla con la mano derecha. 2 Pase la mitad de ...
Page 103 - TECLA DEL CURSOR; TECLA DEL CURSOR IZQUIERDA
7 TECLA DEL CURSOR El visualizador de LCD de esta máquina muestra dos filas de 11 caracteres; sin embargo,el texto que usted cree puede tener hasta 99 caracteres de longitud. Podrá revisar y editarel texto empleando las teclas del cursor para moverlo y que muestre las distintas partesen el visualiza...
Page 104 - TECLA DEL CURSOR HACIA ABAJO; Para mover el cursor a la línea siguiente:; Para mover el cursor varias líneas hacia abajo:; Para mover el cursor al final de todo el texto:
8 TECLA DEL CURSOR HACIA ABAJO Para mover el cursor a la línea siguiente: ● Presione una vez. ☞ Si el cursor está en la última línea del texto, se moverá al final de la línea. Para mover el cursor varias líneas hacia abajo: ● Mantenga presionado hasta que el cursor se mueva a la posición deseada. Pa...
Page 105 - TECLAS CODE, ALT Y SHIFT; TECLA CODE; Para emplear una función impresa encima de la tecla:; TECLA ALT
9 TECLAS CODE, ALT Y SHIFT La mayoría de los caracteres pueden introducirse simplemente presionando sus teclas.Sin embargo, para emplear funciones especiales o para introducir letras en mayúsculas,caracteres acentuados y algunos símbolos, se requieren las siguientes teclas especiales. TECLA CODE Par...
Page 106 - TECLA DE RETORNO; Anchuras de cinta
10 TECLA DE RETORNO Al igual que en una máquina de escribir o procesador de texto, la tecla de retorno ( ) de esta máquina se emplea para poner fin a una línea de texto y empezar otra. Cuando haya terminado de introducir una línea, presione la tecla de retorno para haceruna línea nueva y mover al cu...
Page 107 - TABULACIÓN; Para ajustar la longitud de las tabulaciones:
11 TABULACIÓN Esta función le permitirá separar secciones de una línea de texto añadiendo tabulaciones.Esto le permitirá crear columnas perfectamente alineadas sin tener que introducir variosespacios. Todas las tabulaciones tendrán la misma longitud y se medirán desde elcomienzo de la línea, o de la...
Page 110 - Para borrar una línea de texto:
14 FUNCIÓN DE BORRADO DE LÍNEA (LINE OUT) Con la función de borrado de línea, podrá sacar con facilidad una línea entera de texto. Para borrar una línea de texto: 1 Presione , , , o para situar el cursor dentro de la línea del texto que usted desee borrar. 2 Mantenga presionado y presione una vez. ☞...
Page 111 - FUNCIÓN DE ACENTOS; Para escribir un carácter acentuado:
15 FUNCIÓN DE ACENTOS La función de acentos también podrá utilizarse para añadir caracteres acentuados al texto. Muchos de estos caracteres podrán introducirse empleando . Los caracteres acentuados se agrupan de acuerdo con la letra mayúscula o minúsculacon la que se combinan. Hay disponibles los si...
Page 112 - FUNCIÓN DE SÍMBOLOS
16 FUNCIÓN DE SÍMBOLOS Además de letras, de los símbolos y los números de las teclas, hay 126 marcas adiciona-les con la función de símbolos.Los siguientes símbolos están disponibles:Para escribir un símbolo: 1 Mantenga presionado y presione . Aparecerá una fila símbolos en el visualizador. 2 Presio...
Page 113 - FUNCIÓN DE FORMATO AUTOMÁTICO
17 FUNCIÓN DE FORMATO AUTOMÁTICO Con la función de formato automático, podrá seleccionar gran variedad de formatos pre-ajustados adecuados para su necesidad específica. Esta función ajustará automática-mente la longitud de la etiqueta y los márgenes de la cinta sin cambiar el texto ni ningúnotro for...
Page 114 - Para seleccionar un formato preajustado:
18 Para seleccionar un formato preajustado: 1 Mantenga pulsada y presione una vez . El ajuste actualmente selec- cionado parecerá en el visualizador. 2 Pulse o para seleccionar el ajuste deseado. ☞ El ajuste predeterminado (DEFAULT) podrá seleccionarse presionando . 3 Presione para aplicar el ajuste...
Page 115 - FUNCIÓN DE MEMBRETE; Para adherir un membrete:
19 FUNCIÓN DE MEMBRETE La función de membrete le permite crear con rapidez y facilidad sus propios clichés paramembretes personalizados. Seleccione esta función para centrar automáticamente el texto yajustar la longitud de la cinta y los márgenes a un formato perfecto para los soportes de pelí-culas...
Page 116 - FUNCIONES DE TAMAÑO Y DE ANCHURA; Para activar o desactivar la función de anchura:
20 FUNCIONES DE TAMAÑO Y DE ANCHURA El tamaño de los caracteres puede ajustarse empleando las funciones de tamaño (Size) yde ancho (Wide). Puesto que el tamaño de los caracteres que puede utilizarse dependedel ancho de la cinta, la tabla siguiente indica los tamaños de caracteres que pueden uti-liza...
Page 117 - FUNCIÓN DE ESTILO
21 FUNCIÓN DE ESTILO Podrá seleccionar entre doce estilos de caracteres distintos que podrá aplicar a su texto. ☞ Los caracteres que se imprimen utilizando los tamaños más pequeños puedenresultar difíciles de leer si se seleccionan ciertos ajustes de estilos (por ejemplo,(I+SHADOW). Hay disponibles ...
Page 118 - FUNCIÓN DE SUBRAYADO; Para cambiar el ajuste del subrayado:
22 FUNCIÓN DE SUBRAYADO Podrá acentuar el texto subrayándolo.El ajuste de subrayado predeterminado es OFF. Cuando haya ajustado la función desubrayado a ON, el indicador de subrayado de la parte derecha del visualizador seencenderá. Para cambiar el ajuste del subrayado: 1 Manteniendo presionada , pu...
Page 119 - FUNCIÓN DEL TIPO DE CARACTERES
23 FUNCIÓN DEL TIPO DE CARACTERES Con la función del tipo de caracteres podrá seleccionar una amplia variedad de tipos decaracteres para su texto.Los ajustes de tipos de caracteres siguientes están disponibles en la PT-1800/1810: HELSINKI, BRUSSELS El ajuste inicial del tipo de caracteres es HELSINK...
Page 120 - FUNCIÓN DE MARCOS
24 FUNCIÓN DE MARCOS Con la función de marcos, podrá seleccionar diversos marcos y funciones destacadaspara hacer un diseño más decorativo o una etiqueta con más énfasis.Los ajustes de marcos siguientes están disponibles: OFF, ROUND, CANDY, POINTING, NAMEPLATE, DOT El ajuste inicial de marco es OFF,...
Page 121 - FUNCIÓN DE CINTA; Para cambiar el ajuste de la cinta:
25 FUNCIÓN DE CINTA La función de margen cinta le permite ajustar el tamaño de los márgenes de los ladosizquierdo y derecho del texto.El ajuste inicial de margen cinta es FULL, aunque hay también disponibles otros tres ajustes. ☞ Después de imprimir una etiqueta usando el ajuste NONE de margen cinta...
Page 122 - FUNCIÓN DE LA ALINEACIÓN HORIZONTAL; Para cambiar el ajuste de la alineación horizontal:
26 FUNCIÓN DE LA ALINEACIÓN HORIZONTAL Podrá elegir alinear texto en una de las tres formas disponibles. Además, si utilizó la fun-ción de longitud para ajustar la longitud de la etiqueta, los texto se alinearán dentro de laetiqueta de acuerdo con el ajuste de alineación horizontal seleccionado.El a...
Page 123 - FUNCIÓN DE IMPRESIÓN DE ESPEJO; Para activar o desactivar la impresión de espejo:
27 FUNCIÓN DE IMPRESIÓN DE ESPEJO Con esta función, podrá imprimir el texto de modo que los caracteres puedan leersedesde el lado del adhesivo de la cinta. Si se adhieren etiquetas con impresión de espejo aun vidrio, o en otro material transparente, podrán leerse correctamente desde el ladoopuesto. ...
Page 124 - LENGTH FUNCTIÓN; Para activar y desactivar la función de longitud:
28 LENGTH FUNCTIÓN Aunque la longitud de la etiqueta impresa ajusta automáticamente dicha longitud deacuerdo con el texto introducido, es posible que usted desee hacer una etiqueta conuna longitud específica. La función de longitud le permitirá ajustar la longitud de la eti-queta entre 1,6” y 11,8” ...
Page 125 - FUNCIÓN DE LA TECLA DE IMPRESIÓN Y AVANCE; Para hacer avanzar la cinta:
29 FUNCIÓN DE LA TECLA DE IMPRESIÓN Y AVANCE Después de haber introducido el texto y de haber seleccionado los ajustes del formatodeseado, estará preparado para la impresión. Para imprimir una etiqueta: ● Presione una vez . Se visualizará “COPIES” y a continuación el número de etiquetas que van a im...
Page 126 - FUNCIÓN DE NUMERACIÓN
30 FUNCIÓN DE NUMERACIÓN Esta función podrá utilizarse para imprimir muchas copias del mismo texto aumen-tando en 1 cierto número en el texto después de haber impreso cada etiqueta.Para utilizar la función de numeración: 1 Presione , , , o para colocar el cursor debajo del número que desee aumentar....
Page 127 - FUNCIÓN DE IMPRESIÓN REPETIDA
31 FUNCIÓN DE IMPRESIÓN REPETIDA Esta función le permite imprimir hasta 9 copias del mismo texto. Para emplear la función de impresión repetida: 1 Mantenga presionado y presione . Aparecerá el mensaje “COPIES UNTIL 1-9?” en el visualizador. 2 Presione la tecla numérica ( a ) correspondiente al númer...
Page 128 - FUNCIONES DE LA MEMORIA; ALMACENAMIENTO DE TEXTO; Para almacenar un archivo de texto:
32 FUNCIONES DE LA MEMORIA Usted podrá utilizar la memoria para almacenar sus archivos de texto más frecuente-mente utilizados. El texto permanecerá en la memoria, incluso después de haberlo elimi- nado del visualizador utilizando la función de borrado (manteniendo presionada y presionando ). Cuando...
Page 129 - Par reescribir un archivo almacenado con otro nuevo:; INVOCACIÓN DE TEXTO; Para invocar un archivo de texto:; BORRADO DE UN ARCHIVO; Para borrar un archivo de texto:
33 Par reescribir un archivo almacenado con otro nuevo: ● Presione para borrar el archivo previamente almacenado y almacenar el nuevo con el número seleccionado. ☞ Para retroceder y elegir otro número de archivo sin reescribir el archivo de texto, presione , y después presione una tecla numérica cor...
Page 131 - SOLUCIÓN DE PROBLEMAS; Problema
35 SOLUCIÓN DE PROBLEMAS Problema Remedio 1. El visualizador se queda en blanco des- pués de haber conectado la alimenta-ción de la máquina. • Compruebe que el adaptador de CA esté correctamente enchufado. • Si está empleando pilas alcalinas, com- pruebe que estén correctamente inser-tadas. • Si las...
Page 132 - LISTA DE MENSAJES DE ERROR; Mensaje de error
36 LISTA DE MENSAJES DE ERROR Mensaje de error Causa Remedio 3 LINE LIMIT! • Este mensaje aparece si ya existen cuatro líneas tres pre- siona . • Límite el número de líneas a tres. BATTERIES WEAK! • Este mensaje aparece cuando las pilas alcalinas instaladas están gastadas. • Reemplace las pilas o em...
Page 136 - ESPECIFICACIONES; Dispositivo de entrada:; Cabezal de impresión:
40 ESPECIFICACIONES HARDWARE SOFTWARE Dispositivo de entrada: Teclado de 52 teclas LCD: 7 × 5 puntos 12 caracteres × 2 líneas 17 indicadores Cinta de impresión: Sensible a la presión, base adhesiva, 8 m (26´3”) de longitudCuatro anchos disponibles: 6 mm (1/4”)9 mm (3/8”) 12 mm (1/2”)18 mm (3/4”) Ali...
Page 137 - ACCESORIOS; producto
41 ACCESORIOS ● Accesorios de consumoAdquiera los casetes de cinta en el distribuidor autorizado que le quede más cerca. Emplee sólo cintas Brother TZ con esta máquina. Brother no puede hacerse respon-sable por los problemas causados por el empleo de accesorios de consumo no auto-rizados. No emplee ...