Zyxel omni.net Plus - Manuals

Page 3 - Table of Contents

omni.net Plus/D Quick Start Guide i Table of Contents 1. Installation _____________________________________________________ 1-1 Front Panel Description ________________________________________________1-1 Back Panel Description and Connections (S/T Interface) ________________________1-4 Connect Your ...

Page 5 - Front Panel Description

omni.net Plus/D Quick Start Guide 1- 1 1. Installation Thank you for choosing ZyXEL ISDN Terminal Adapter (ISDN TA) as your device for connecting ISDN. This section is designed to guide you through a quick and correct installation of your new omni.net Plus or omni.net D. The following graphics are o...

Page 6 - Front Panel LEDs

omni.net Plus/D Quick Start Guide 1- 2 Front Panel LEDs LED Function Active Description PWR P o w e r L E D O n W h e n t h e p o w e r i s t u r n e d O N . LNK L i n k L E D O n Blinking W h e n t h e l i n k w i t h t h e l o c a l I S D N s w i t c h i s a c t i v e . W h e n a t t e m p t i n g...

Page 7 - Front Panel Switch

omni.net Plus/D Quick Start Guide 1- 3 Front Panel Switch When the TA is in command state, pressing the front panel button causes it to dial the default phone number pre-stored in the NVRAM. The default number pointer to the telephone directory is assigned by the AT*D n command. When the TA is on-li...

Page 8 - Back Panel Switch and Connectors

omni.net Plus/D Quick Start Guide 1- 4 Back Panel Description and Connections (S/T Interface) Back Panel Switch and Connectors ON/OFF P o w e r O N / O F F s w i t c h POWER Input terminal for power adapter. To DTE Serial port DB-25 female connector for connection to the serial port of a DTE (comput...

Page 10 - Power On and Self Diagnostics; DTR

omni.net Plus/D Quick Start Guide 1- 6 Power On and Self Diagnostics Once you have completed all of the installation steps above, flip the omni On/Off switch to the ON (up) position.The unit starts a self -test sequence, where you should see a series of LED lights blinking (LED, B1, B2, AA). After t...

Page 11 - Before Installation; Re adme files

omni.net Plus/D Quick Start Guide 2- 1 2. Install Windows 95/98/NT Driver (INF file) As a windows 95/98/NT user, for successfully us ing ZyXEL ISDN TA, you have to install INF files to setup your TA first, then install your ZyXEL ISDN Configuration Manager. Before Installation Insert BONUS CD into y...

Page 12 - Start Installing INF file

omni.net Plus/D Quick Start Guide 2- 2 Start Installing INF file If your computer supports Plug & Play, be sure your TA is powered on before starting your computer. If you are using a non-PnP protocol, follow the steps below to perform the installation: Step 1. Double -click on the Modems icon i...

Page 21 - Install ZyXEL ISDN Configuration

omni.net Plus/D Quick Start Guide 3- 1 3. Install ZyXEL ISDN Configuration Manager for Windows 95/98/NT Once the INF file is successfully installed, you can start installing ISDN Configuration Mangaer & CAPI (32-bit) into your PC. Follow the steps below to proceed your installation: Step 1. Make...

Page 32 - Customer Support; ISDN Terminal Adapter; Contact ZyXEL; Postal Service; ZyXEL

omni.net Plus/D Quick Start Guide 4- 2 Customer Support ZyXEL ISDN Terminal Adapter If you have any questions about your ZyXEL product or desire cus tomer assistance, contact ZyXEL in one of the following ways. Contact ZyXEL E-mail Technical Support [email protected] in North America Support@zyxel ....