Zyxel IES1248 - Manuals

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 5 Set up Low Speed Profile. Give this profile a name like Profile_LowSpeed and input the MaxRate for Up Stream and Down Stream. In this case, we set 512Kbps and 2048Kbps for Up Stream and Down Stream. Set up Hig...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 6 1.2 Profile Assignment Click Basic Setting , xDSL Port Setup in the navigation panel to display configuration screen as shown. Assign Profile_LowSpeed to port 1. Click a number 1 in the Port index field to ent...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 7 combobox. Check the Active and Profile&Mode . After press the Paste button. It will pop up a screen to select the ports. Select the ports you want to copy the configuration to and press Apply button. The s...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 8 2. Prestige 660R-61 Settings We configure Prestige 660R-61 as bridge mode. The default VPI/VCI of IES-1248 is 0/33. So we need to set up such values. Prestige 660R-61 has a Telnet server inside. We need to con...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 9 2.3 Menu11.1: Remote Node Profile In menu11.1, we should activate this profile with “Active= Yes”. The Encapsulation and the Multiplexing are the same as the menu 4. Setting “Edit ATM Options=Yes” will enter M...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 10 You can click Basic Setting and xDSL Line Data in navigation Panel to display configuration screen as shown. Select the port connected to the IES-1248. You will see the link speed and link mode. How to config...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 11 and belong to different VLAN. One is VLAN 10 and the other is VLAN 20. So they can’t communication with each other. But both PC 1 and PC 2 can connect to Internet. How to set up a VLAN environment. In this ap...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 12 Add VLAN20. Assign Port 2, ENET1 and ENET2 to be members of VLAN20 as shown. Add VLAN200. Assign Port 1, Port2, ENET1 and ENET2 to be members of VLAN200 as shown.

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 13 1.2 PVID settings After set up the three VLAN, we can see Vlan10, Vlan20 and Vlan200 as shown. Now, click VLAN Port Setting to set the PVID. We assign VLAN 200(PVID) to ENET1, ENET2. Also, we assign VLAN 10 a...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 14 1.3 Port Isolation If we just want to isolate ports of IES-1248 and don’t want to set any VLAN, there is another easy way to do this. Click Basic setting , Switch Setup in navigation panel to display configur...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 15 In this application, we demonstrate how to set up the multiple PVCs environment. From the figure below, the PC wants to access the two kinds of network services. One is the Internet service (data service) and...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 16 Add VLAN20. Assign Port 1, ENET1 to be members of VLAN20 as show. We need to check the Tx Tagging on ENET1. 1.2 VC profile setup Click Basic Setting and xDSL Profile Setup in navigation panel to display the c...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 17 Add Defval_CBR VC profile. Set up Encap, Class, PCR and CDVT as shown. Encap should be LLC the same as IES-1248. Class should be CBR which has higher priority in ATM QoS. 1.3 Multiple PVCs setup Click Basic S...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 18 We hope VPI/VCI with 0/33 get the higher priority. We should modify this VPI/VCI with Defval_CBR profile which we created before. Press Apply button to make it take effect. Then we add the VPI/VCI with 0/34. ...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 19 application, we already knew how to set up CPE with one channel (0/33). We just demonstrate how to set up second channel. 2.1 Menu11.1: Remote Node Profile In menu11.1, we should activate this profile with “A...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 21 Add VLAN20. Assign Port 2, Port 10 to be members of VLAN20 as show. We need to check the Tx Tagging on Port 10. 3.2 PVID setup Click Advanced Application and VLAN in navigation panel to display configuration ...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 22 Let 10 be the PVID of Port 1 and 20 be the PVID of Port 2. In this application, you will see the video traffic will go via 0/33 and data traffic

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 23 will go via 0/34. And the 0/33 get the higher priority. The video traffic will go first when the two traffics arrive at the same time. 802.1x Application IEEE 802.1x port-based authentication is desired to pr...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 24 environment. The Microsoft 802.1x client and ZyXEL Vantage 50 will be used as supplication and RADIUS, respectively. Following sections will describe the detailed procedure to set up the environment. 1. IES-1...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 25 2. Vantage 50(RADIUS) settings: We use Vantage 50 as the RADIUS server. It’s a one of ZyXEL’s product. Of course, you can use other RADIUS server like Funk Steel-Belted RADIUS, Cisco Access Control Server, Me...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 26 3. Windows XP(Supplicant) settings: There are many supplicants we can choose like MeetingHouse Aegis client, Funk Odyssey client and Microsoft 802.1x client. We take Microsoft 802.1x client as an example here...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 27 After click the icon, there will be a dialog for entering the user name and password. Click ok after input the correct user name and password that are in the database of authentication server. The settings of...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 28 After above procedure, we can allow the authenticated port the access the server. If the DSL port doesn’t be authenticated, the PCs behind the port can’t access the network. 4. Prestige 660R-61 Settings Pleas...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 29 Double Click the Kiwi’s Syslog Server installing program. It is very easy to install it. After finishing the installation, you can run it from the Start Menu. And you will see following dialog. And the Server...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 30 When DSL ports are linked up/down, IES-1248 sends a record to Syslog server. We can see these logs in Kiwi’s Syslog server. Setting up the Ring Environment The Ring topology is used to guarantee the network b...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 31 How to set up a Ring Environment. We set up Ring environment with one IES1248, one IES2000 and one ES4024. A PC behind IES can connect the PC in the network even one of the links broken. Following sections wi...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 32 Click Active to enable Spanning Tree Protocol. Then enable it on ENET1 port and ENET2 port. 2. Setup IES2000 2.1 Enable Spanning Tree protocol Click Switch Setup in the navigation panel to display configurati...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 33 2.2 Enable Spanning Tree protocol on Ethernet ports Click Port Setup in the navigation panel to display configuration screen as shown. Click msc to display MSC card Port setup. Click Uplink2 to set up this po...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 34 Check Spanning Tree Protocol to enable it. Take the same procedures with Uplink1. Please see the following figure.

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 35 3. Setup ES4024 3.1 Enable Spanning Tree protocol on Ethernet ports Click Advanced Application , Spanning Tree Protocol in the navigation panel to display configuration screen as shown. You will see the Spann...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 36 4. Results We can see the link between port 2 of ES4024 and Uplink1 of IES2000 will be blocked as shown after we connect. After we remove the cable between port 1 of IES1248 and port 1 of ES4024, the connecti...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 37 Setting up the IGMP Snooping/IGMP Filtering Without IGMP snooping multicast traffic is treated in the same manner as broadcast traffic, that is, it is forwarded to all port. With IGMP snooping, multicast traf...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 38 How to set up IGMP snooping/IGMP filtering Here, we only set up the IES1248 to support IGMP snooping and IGMP filtering. Please refer to the user guide of the Video Server and the subscriber device. We assume...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 39 1.2 Set up IGMP Filtering If we don’t set up IGMP filtering, the subscriber will receive all the movies. We set up a IGMP filter Profile and apply it to specific port to limit the channels subscriber can see....

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 40 We select the Subscriber1 in IGMP Filter Profile Combobox. And click Apply to let the setting take effect. Go back to check the IGMP Snooping table. We will see only two channels allowed to be forwarded to po...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 41 224.0.0.2---------all routers on this subnet 224.0.0.5---------all routers running OSPF 224.0.0.6---------all Designed Routers running OSPF 224.0.0.9---------for RIPv2 224.0.1.1---------for NTP Before using s...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 42 An ISP wants to provide multicast video service to end user and subscribes who with different pay enjoy different programs. Client A (connect to ADSL port 1) is a normal subscribe, so he has no authority to a...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 43 2. Please key in “01:00:5e:00:00:01” in the “Adding new entry” and click “Add” to bring up the following screen. “ V” displays for member and “-” displays for non-member. 3. Please do the same step to add “01...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 46 MAC address on specified ADSL ports, a range of ADSL ports or all ports, delete <multicast MAC> Remove a static multicast filter entry by deleting the associated MAC address. How to achieve the same goa...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 47 How to set up MAC Filter/Port Security Here, we will set up an environment to allow PCs with certain MAC address and the number of PCs behind port 3 to access the Internet. 1. IES-1248 settings 1.1 Set up MAC...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 48 You will see the MAC address in the MAC field. Then check the Active check box of Port 3 and press Apply button to enable this feature. Only the MAC addresses listed here can access the Internet behind certai...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 49 Click Management , MAC Table in the navigation panel to display configuration screen as shown. And select port 3. You will see the MAC table will be shown as you configured in previous steps. DHCP Relay Optio...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 50 How to set up DHCP Relay Option 82 Environment Here, we will set up an environment to allow a PC get DHCP IP address in specific IP pool according to its DSL port, VLAN ID and the option 82 string. In this ca...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 51 2. CPE settings Connect CPE to the 25 th DSL port. Please see former applications for Detailed settings. 3. IP Commander settings Open IP Commander. Right click “IP commander and then click “ connect new serv...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 52 Input the DHCP IP address or domain name and click “ok”. Our IP is 192.168.1.99. Input user name and password. The default user name is “administrator” and password is “incognito”.

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 53 It will bring up the following screen, please make sure that your DHCP is in “ online ” status. Then click “ wizard ” in the top tool bars and select “ rule wizard ”.

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 54 Give a name and description to the new rule. Assign a range of IP addresses or just one IP address to this rule. In our case, we set the IP pool from 192.168.1.201 to 192.168.1.203.

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 55 After input IP pool, we select “DHCP Option” in Keywords combobox. After select the “DHCP Option”, it will pop up “Add DHCP Option Rule” dialog.

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 56 Select “option 82 Relay Agent Information”, sub-option 1, binary data. For port 25, VLAN 1, “1248”, please key in “0019000131323438” as the key value and click OK. Please note that the first 2 bytes define po...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 57 Then pop up the following screen and you can just press Next button. Then you can add DHCP template (option) such as gateway, DNS server and so on.

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 58 Here we use “192.168.1.1” as gateway IP address of DHCP client PC. You can apply DDNS service to DHCP server or not.

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 59 The rule creation has been finished.

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 60 After finishing all above procedures, your PC will get the IP address 192.168.1.201 when you send a DHCP request. Filter Some Certain Packet ISP may want to filter some kinds of packets. IES-1248 provides “Pa...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 61 Please select port 1 and clear the NetBios check box. Meanwhile, you will see Filter Out in NetBios check box. Press Add button make the change take effect. So you will see the port 1 will block the NetBios p...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 62 Cascade two IES1248 (Daisy chain mode) You know, the IES1248 is a remote mini-DSLAM. When the subscriber number is increased, ISPs may cascade or daisy-chain the more then one IES1248 to extend the port numbe...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 63 VLAN Application Application Scenario A: Scenario Description In this scenario, each building has 2 departments, and users belong to the same

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 64 department could communicate with each other, but communication between different departments is forbidden for security and confidential reason. PCs from Sales department (VLAN 10) connected to Port 1, 2, 3 o...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 65 3. Please click VLAN port setting to bring up the following screen, setup PVID 10 for port 1, port 2, port 3; PVID 20 for port 4,port 5, port 6. Application Scenario B:

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 66 Scenario Description: In this scenario, PCs belong to different divisions within a single corporation can not communicate with each other, and we left some ports of switches are for GVRP-aware PC and others a...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 67 Add VLAN 20 to this switch, VLAN 20: port 4, fixed, untag; port 23, fixed, Tx tagging. Please click VLAN port setting to bring up the following screen, setup PVID 10 for port 3, PVID 20 for port 4 , and enabl...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 68 2. For Switch B on Floor 1: Please follow the same steps to adding VLAN 10: port 3, fixed, untag; port 23, fixed, Tx tagging; port 24, fixed, Tx tagging”. Add VLAN 20 to this switch, VLAN 20: port 4, fixed, u...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 69 Please click VLAN port setting to bring up the following screen, setup PVID 10 for port 3, PVID 20 for port 4, and enable GVRP on the top of the screen and port 1, port 2, port 23, port 24. 3. For Switch C on...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 70 Please set static VLAN 20: port 23, fixed, untag . Please add VLAN 30: port 1, fixed, untag; port23, fixed, untag; port 24, fixed, Tx tagging.

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 71 Please setup PVID 30 for port 1 and enable GVRP on port 3 and port 24. Application Scenario C:

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 75 Please click VLAN port setting to bring up the following screen, setup PVID 10 for port 3, PVID 20 for port 4, and enable GVRP on the top of the screen and port 1, port2, port 23, port 24. 2. For Switch C (la...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 77 After finish domain setting, please change the default gateway and domain name server setting and click “Apply”. Please click “Filtering” under “Advanced Application” menu list to bring up the following scree...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 78 You will see the following screen after finish filtering setting.

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 79 Advise: 1. Please also configure routing protocol to make layer 3 Switch and gateway exchange their routing information in this scenario. 2. You can also enable DHCP feature based on VID on layer 3 Switch (ES...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 80 FAQ What is the maximum line rate of IES1248 ? It can support ADSL2+, so line rate can reach to 1.2Mbps in upstream direction and 25 Mbps in downstream in a short distance. How many management instances can a...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 81 What kind of the features that IES 1248 supports ? • RFC 2684 Bridge Mode (Replace RFC 1483) • IEEE 802.1Q • VLAN acceptable frame type filter • IGMPv2 Snooping • ATM QoS (UBR, CBR, VBR) per PVC • DHCP Relay ...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 82 ¾ IP ROUTE: 128 ¾ Static multicast address: 32 ¾ Igmp groups: 512 groups ¾ MAC learning: 14k (128 per ADSL port, 4k per ENET port) ¾ RPVC gateway IP address: 96

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 83 Trouble Shooting If my computer can’t access the DSLAM by WEB/Telnet/Ping from Ethernet port, only console screen can access successfully, what can I do? 1. Make sure that the Ethernet port has the appropriat...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 84 Please key in “sys server show” to check server port, make sure that your application follow the server port in the list shown. 5. Please check VLAN configuration, make sure that traffic from outside is tagge...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 85 will be added with CPU VLAN ID when access the IES. 6. please check your topology if you are not connect PC or device to IES directly. If DHCP Relay Option 82 can’t work, for example, PC can not get desired I...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 86 Press Browse button to select the default rom file. Then press “Upload” button. b) IES2000/3000 Upload default rom file to IES2000/3000 by ftp, web or console Console: When the system reboots, press any key w...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 87 Suggest changing it to 115,200 temporarily to speed up speed by “atba5” command. Take “atlc” command to restore the default configuration file. When you see “cccc…”, please send the default rom file to MSC vi...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 89 Please ftp into the DSLAM. Replace the rom-0 with the default rom file by put command. c) IES1248 You can set the factory default by CLI command or WEB WEB: Please open Maintenance Page. Click the “Restore De...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 90 restoring. xDSL link fail? 1. Check if the DSL port is enabled. 2. Check if the cable is plugged well. 3. For ADSL, check the ADSL modem and line card are in the same mode (Annex A or Annex B). 4. For G.SHDSL...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 91 I forgot the Password, how do I recover it? a.) IES-1000 Please use the BOOTP/TFTP and bin file to recover the configuration to factory default. Please refer to IES-1000's user manual to see the recovery proc...

IES 1248 Support Notes All contents copyright (c) 2006 ZyXEL Communications Corporation. 92 null-modem cable. 3. Check if the Console is damaged; if possible, try to change another one to give a try. 4. Try to use the other Terminal software tool to see if it’s a Terminal software issue. There is no...