Page 3 - ISDN Router; Copyright
Prestige 480 Dual BRI ISDN Router iii Prestige 480 ISDN Router Copyright Copyright © 02.08.1999 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitt...
Page 4 - Declaration of Conformity; ZyXEL Communications Services GmbH.; declare that the product; is in conformity with; Standard; Electrostatic discharge immunity test – Basic EMC Publication
Prestige 480 Dual BRI ISDN Router iv Declaration of Conformity We, the Manufacturer/Importer ZyXEL Communications Services GmbH. Thaliastrasse 125a/2/2/4 A -1160 Vienna - AUSTRIA declare that the product Prestige 480 is in conformity with (Reference to the specification under which conformity is dec...
Page 5 - Prestige 480 Dual BRI ISDN Router; Power Magnetic Measurement
Prestige 480 Dual BRI ISDN Router v • EN 61000 -4-8 Power Magnetic Measurement 1993 • EN61000-4-11 Voltage dips, short interruptions and voltage variations immunity tests 1994
Page 6 - ZyXEL Limited Warranty; an act of God, or subjected to abnormal working conditions.; Note
Prestige 480 Dual BRI ISDN Router vi ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase. During the warranty period, and upon proof of purchase...
Page 7 - Customer Support; Corporation offices worldwid e, in one of the following ways:
Prestige 480 Dual BRI ISDN Router vii Customer Support If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation offices worldwid e, in one of the following ways: Method Location E- MAIL – Support/ Sales Telephone/Fax Web Site/ FTP Site Regular Mai...
Page 9 - Table of Contents
Prestige 480 Dual BRI ISDN Router Table of Contents ix Table of Contents Declaration of Conformity ......................................................................................................iv Table of Contents .................................................................................
Page 19 - List of Figures
Prestige 480 Dual BRI ISDN Router List of Figures xix List of Figures Figure 1- 1 Internet Access Application ....................................................................................................................... 1- 6 Figure 1- 2 Internet Access Application ............................
Page 25 - List of Tables
Prestige 480 Dual BRI ISDN Router List of Tables xxv List of Tables Table 2 - 1 LED Functions............................................................................................................................................... 2- 1 Table 2 - 2 Main Menu Commands ..............................
Page 27 - Preface; About Your Router; About This User's Manual; This user's guide shows you how to configure and manage your router.; Other Resources
Prestige 480 Dual BRI ISDN Router Preface xxvii Preface About Your Router Congratulations on your purchase of the Prestige 480 dual BRI ISDN Router. The Prestige 480 is a high-performance router that offers a complete solution for your WAN (Wide Area Network) applications such as Internet access, mu...
Page 28 - Syntax Conventions; Arial
Prestige 480 Dual BRI ISDN Router Preface xxviii For more information about the Prestige check the following sources: ♦ Prestige Support disk. ♦ Release notes for firmware upgrades and other information. These can be accessed through ZyXEL FTP server site and ZyXEL web Page. For ZyXEL support inform...
Page 29 - Prestige Scenarios; the following sections; SCENARIO
Prestige 480 Dual BRI ISDN Router Prestige Scenarios xxix Prestige Scenarios For fast access to example SMT menus to show you how to configure the Prestige for various scenarios go to the following sections SCENARIO GO TO SECTION To reset your Prestige 2.9 NetCAPI 2.12 DHC P 3.4 Internet Access 3.5 ...
Page 30 - General Structure of this Manual
Prestige 480 Dual BRI ISDN Router Structure of the Manual xxx General Structure of this Manual Getting Started (Chapters 1-2) This helps you connect, install and setup your Prestige to operate on your network . The Internet (Chapter 3) This shows you how to configure your Prestige for Internet acces...
Page 31 - Chapter 1; The following are the key features of the Prestige 480.
Prestige 480 Dual BRI ISDN Router Getting to know your Prestige 1-1 Chapter 1 Getting to Know Your Router This chapter describes the key features and applications of your Prestige. 1.1 Prestige 480 ISDN Router The Prestige 480 is a dual-line multi-protocol ISDN router. The Prestige is ideal for ever...
Page 35 - Applications for Prestige 480
Prestige 480 Dual BRI ISDN Router Getting to know your Prestige 1-5 Packet Filtering The Prestige supports packet filtering that stops leakage of private data to the outside world and controls access to undesirable lo cations. Call Control Your Prestige provides budget management for outgoing calls ...
Page 36 - Figure 1-1 Internet Access Application; Internet Single User Account
Prestige 480 Dual BRI ISDN Router 1-6 Getting to know your Prestige 1.3.1 Internet Access The Prestige is the ideal high-speed Internet access solution. Your Prestige supports the TCP/IP protocol that the Internet uses exclusively. It is also compatible with access servers manufactured by major vend...
Page 38 - Figure 1-2 Internet Access Application
Prestige 480 Dual BRI ISDN Router 1-8 Getting to know your Prestige Figure 1-2 Internet Access Application
Page 40 - Figure 1-4 Remote Access Server Application
Prestige 480 Dual BRI ISDN Router 1-1 0 Getting to know your Prestige 1.3.3 Remote Access Server Your Prestige allows remote users to dial in and gain access to your LAN. This feature enables users that have workstations with remote access capabilities, e.g., Windows 95, to dial in to access the net...
Page 41 - Chapter 2; well as set up your ISDN connection using the SMT.; Front Panel LEDs; table describes the LED functions:; Figure 2-1 Front Panel; Field; PWR
Prestige 480 Dual BRI ISDN Router Hardware Installation and Setup 2-1 Chapter 2 Hardware Installation & Initial Setup This chapter shows you how to make the cable connections to your Prestige as well as set up your ISDN connection using the SMT. 2.1 Front Panel LEDs The LED indicators on the fro...
Page 42 - The B1/B2 LED is on when the corresponding B Channel is in use.; Prestige 480 Rear Panel and Connections; Figure 2-2 Prestige 480 Rear Panel and Connections
Prestige 480 Dual BRI ISDN Router 2-2 Hardware Installation and Setup Field Description ISDN 1 & 2 LNK B1/B2 The LNK (Link) LED is on when the Prestige is connected to an ISDN switch and the line has been successfully initialized; otherwise, it is off. The B1/B2 LED is on when the corresponding ...
Page 43 - Prestige Network Commander
Prestige 480 Dual BRI ISDN Router Hardware Installation and Setup 2-3 Step 1. Connecting the ISDN line s Connect the Prestige to the ISDN network using the included ISDN (black) cable. Plug one end of the cable into the port labeled ISDN BRI and the other to the ISDN wall jack. Step 2. Connecting Et...
Page 44 - Additional Installation Requirements; VT100 terminal emulation.; Power On Your Prestige; power port to the appropriate devices or lines.
Prestige 480 Dual BRI ISDN Router 2-4 Hardware Installation and Setup Note: You cannot access the PNC if you use the RS232 cable. You must use only the Ethernet cable. 2.4 Additional Installation Requirements In addition to the contents of your package, there are other hardware and software requirem...
Page 45 - Figure 2-4 Login Screen; to bring; Navigating the SMT Interface; Table 2-2 Main Menu Commands; Operation; Move to a submenu Press the [Space; YES; then press; Yes
Prestige 480 Dual BRI ISDN Router Hardware Installation and Setup 2-5 Figure 2-3 Power-On Display Step 2. Entering Password The login screen appears after you press [Enter], prompting you to enter the password, as shown next. For your first login, enter the default password 1234 . As you type the pa...
Page 46 - or
Prestige 480 Dual BRI ISDN Router 2-6 Hardware Installation and Setup Operation Press/<read> Description to YES then press [ENTER]. to a submenu. Move the cursor [Enter] or [Up]/[Down] arrow keys Within a menu, press [Enter] to move to the next field. You can also use the [Up]/[Down] arrow key...
Page 47 - Figure 2-5 SMT Main Menu; System Management Terminal Interface Summary; Table 2-3 Main Menu Summary; Menu Title
Prestige 480 Dual BRI ISDN Router Hardware Installation and Setup 2-7 Figure 2-5 SMT Main Menu 2.7.1 System Management Terminal Interface Summary Table 2-3 Main Menu Summary # Menu Title Description 1 General Setup Use this menu to setup general information. 2 ISDN Setup Use this menu to setup the I...
Page 48 - System Maintenance; Changing the System Password; Enter 23 in the Main Menu to open; Enter 1 in; Menu 23.1 - System Security – Change P assword
Prestige 480 Dual BRI ISDN Router 2-8 Hardware Installation and Setup 24 System Maintenance This menu provides system status, diagnostics, firmware upload, etc. 25 IP Policy Routing This menu allows you to configure Routing Policies, 99 Exit To exit from SMT and return to the blank screen. 2.8 Chang...
Page 49 - Resetting the Prestige
Prestige 480 Dual BRI ISDN Router Hardware Installation and Setup 2-9 When the Menu 23.1 - System Security -Change Password appears, as shown in the next figure , type in your existing default system password, i.e., 1234, and press [ Enter]. Figure 2-7 Menu 23.1 - System Security - Change Password S...
Page 50 - Figure 2-8 Booting Up the Prestige; Enter Debug Mode; NOTE; filename to “ras” when uploading to the Prestige via FTP or TFTP.
Prestige 480 Dual BRI ISDN Router 2-1 0 Hardware Installation and Setup Turn on the Prestige again. You should see the following scre en. Figure 2-8 Booting Up the Prestige When you see the message "Press Any key to enter Debug Mode within 3 seconds", press any key to enter debug mode. Follo...
Page 52 - System Name
Prestige 480 Dual BRI ISDN Router 2-1 2 Hardware Installation and Setup 2.10 General Setup Menu 1 - General Setup contains administrative and system- related information. To enter Menu 1 and fill in the required in formation, follow these steps: Step 1. Enter 1 in the Main Menu to open Menu 1 – Gene...
Page 53 - European ISDN Setup Menus; Figure 2-10 Menu 2 – ISDN Setup; From; Figure 2-11 Menu 2.1 – ISDN Basic Setup
Prestige 480 Dual BRI ISDN Router Hardware Installation and Setup 2-1 3 2.11 European ISDN Setup Menus Menu 2 is for you t o enter the information about your ISDN lines. Please note that the Prestige only accepts digits in phone number fields; please do not include ‘-‘ or spaces in these fields. Fig...
Page 54 - in the; Advanced Setup; field o f; Menu 2.1 – ISDN Basic Setup; to display
Prestige 480 Dual BRI ISDN Router 2-1 4 Hardware Installation and Setup Table 2-5 Menu 2.1 – ISDN Basic Setup Field Description. ISDN Line Refers to ISDN line 1 or line 2 setup that you selected in Menu 2 - ISDN Setup Switch Type This field is fixed as DSS-1 for European switches. In general, this w...
Page 56 - calling party; changed, the ISDN initialization takes slightly longer.
Prestige 480 Dual BRI ISDN Router 2-1 6 Hardware Installation and Setup Table 2-6 Menu 2.1.1 - ISDN Advanced Setup Field Description Calling Line Indication The Calling Line Indication , or Caller ID, governs whether the other party can see your number when you call. If set to Enable , the Prestige ...
Page 57 - Figure 2-13 Loopback Test; use a well -defined mechanism for communications using ISDN lines.
Prestige 480 Dual BRI ISDN Router Hardware Installation and Setup 2-1 7 Figure 2-13 Loopback Test 2.12 NetCAPI Setup 2.12.1 Basics NetCAPI is ZyXEL's implementation of CAPI (Common ISDN Application Program Interface) capabilities over a network. It runs over DCP (Device Control Protocol) developed b...
Page 58 - Configuring the P480 as a NetCAPI Server; By default, NetCAPI is enabled on your Prestige.
Prestige 480 Dual BRI ISDN Router 2-1 8 Hardware Installation and Setup Using ISDN -DCP, the Prestige acts as a DCP server. By default, the Prestige listens for DCP messages on TCP port number 2578 (the Internet-assigned number for RVS - COM DCP). When the Prestige receives a DCP message from a DCP ...
Page 59 - Figure 2-14 Configuration Example; such as RVS - COM Lite on your workstation.; Installing the CAPI driver and Communication Software; Go to
Prestige 480 Dual BRI ISDN Router Hardware Installation and Setup 2-1 9 Figure 2-14 Configuration Example Before entering any configurations, you must install the CAPI driver (RVS - CE) and communication program such as RVS - COM Lite on your workstation. 2.13.1 Installing the CAPI driver and Commun...
Page 60 - Table 2-7 NetCAPI Setup Fields
Prestige 480 Dual BRI ISDN Router 2-2 0 Hardware Installation and Setup Figure 2-15 Menu 2.2 - NetCAPI Setup Step 2. Set the fields in the above menu according to the following description. Table 2-7 NetCAPI Setup Fields Field Description Active This field allows you to enable or disable NetCAPI. Pr...
Page 62 - Ethernet Setup; This section describes how to configure the Ethernet using; Menu 3 – Ethernet Setup; Menu, enter 3 to open
Prestige 480 Dual BRI ISDN Router 2-2 2 Hardware Installation and Setup 2.14 Ethernet Setup This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup . From the Main Menu, enter 3 to open Menu 3 . Figure 2-16 Menu 3 - Ethernet Setup 2.14.1 General Ethernet Setup This menu al...
Page 63 - Figure 2-17 General Ethernet Setup; If you need to define filters, please read
Prestige 480 Dual BRI ISDN Router Hardware Installation and Setup 2-2 3 Figure 2-17 General Ethernet Setup If you need to define filters, please read Chapter 9 - Filter Set Configuration , then return to this menu to define the filter sets.
Page 65 - Chapter 3; Prestige for Internet access.; Factory Ethernet Defaults; TCP/IP Ethernet Setup and DHCP; to enter the DNS server address(es) if your ISP gives; Menu 1 - General Setup
Prestige 480 Dual BRI ISDN Router Internet Access 3-1 Chapter 3 Internet Access This chapter shows you how to configure the LAN as well as the WAN of your Prestige for Internet access. 3.1 Factory Ethernet Defaults The Ethernet parameters of the Prestige are preset in the factory with the following ...
Page 66 - Figure 3-1 General Setup; To edit; General Setup; addresses and the subnet mask.
Prestige 480 Dual BRI ISDN Router 3-2 Internet Access Figure 3-1 General Setup To edit Menu 1 , enter 1 in the Main Menu to select General Setup and press [Enter]. 3.3 TCP/IP Parameters 3.3.1 IP Address and Subnet Mask Similar to the houses on a street that share a common street name, the machines o...
Page 67 - Both; IP Pool Setup
Prestige 480 Dual BRI ISDN Router Internet Access 3-3 3.3.2 RIP Setup RIP (Routing Information Protocol) allows a router to exchange routing information with other routers. The RIP Direction field controls the sending and receiving of RIP packets. When set to Both , the Prestige will broadcast it s ...
Page 69 - Ethernet Setup
Prestige 480 Dual BRI ISDN Router Internet Access 3-5 3.4 TCP/IP Ethernet Setup and DHCP You will now use Menu 3.2 to configure your Prestige for TCP/IP . To edit Menu 3.2, select the menu option Ethernet Setup in the Main Menu. When Menu 3 appears, select the submenu option TCP/IP and DHCP Setup an...
Page 70 - Table 3-1 DHCP Ethernet Setup Menu Fields
Prestige 480 Dual BRI ISDN Router 3-6 Internet Access Table 3-1 DHCP Ethernet Setup Menu Fields Field Description Example DHCP This field enables/disables the DHCP server. If it is set to Server , your Prestige will act as a DHCP server. If set to None , the DHCP server will be disabled. If set to R...
Page 71 - Figure 3-3 Physical Network; Prestige
Prestige 480 Dual BRI ISDN Router Internet Access 3-7 Field Description Example third IP Alias. When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel. 3.5 IP Alias 3.5.1 Basics The P480 supports three...
Page 72 - Figure 3-4 Partitioned Logical Networks
Prestige 480 Dual BRI ISDN Router 3-8 Internet Access Figure 3-4 Partitioned Logical Networks For example, in a school you can partition the single physical network into administration network, teachers network and students network as shown next. Figure 3-5 IP Alias Example 3.5.2 IP Alias Setup Pres...
Page 73 - Edit IP Alias; field and toggle; and press [Enter] to configure the second and third network.
Prestige 480 Dual BRI ISDN Router Internet Access 3-9 You must use Menu 3.2 to configure the first network and move the cursor to Edit IP Alias field and toggle the space bar to choose Yes and press [Enter] to configure the second and third network. Figure 3-6 Menu 3.2 - TCP/IP and DHCP Ethernet Set...
Page 74 - IP Alias Setup Menu Fields
Prestige 480 Dual BRI ISDN Router 3-1 0 Internet Access IP Alias Setup Menu Fields Field Description Example IP Alias Choose Yes to configure the LAN network for the Prestige. Yes IP Address Enter th e IP address of your Prestige in dotted decimal notation 192.168.2.1 IP Subnet Mask Your Prestige wi...
Page 75 - Internet Access Configuration; Table 3-3 Internet Account Information; Internet Account Information; Login Name; Internet Access Setup
Prestige 480 Dual BRI ISDN Router Internet Access 3-11 3.6 Internet Access Configuration Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified s etup for one of the remote nodes that you can access in Menu 11. Before you configure your Prestige for...
Page 76 - Figure 3-8 Menu 4 – Internet Access Setup
Prestige 480 Dual BRI ISDN Router 3-1 2 Internet Access Internet access. Figure 3-8 Menu 4 – Internet Access Setup
Page 77 - Table 3-4 Internet Access Setup Menu Fields; not; Y e s; screen and take the appropriate troubleshooting steps.
Prestige 480 Dual BRI ISDN Router Internet Access 3-1 3 Table 3-4 Internet Access Setup Menu Fields Field Description ISP’s Name Enter the name of your Internet Service Provider, e.g., myISP. This information is for identification purposes only. Pri Phone and Sec Phone Number Both the Primary and th...
Page 78 - Single User Account; your ISP before you enable this feature).; Figure 3-9 Single User Account Topology; offices to the corporate network.; The SUA network appears as a; INTERNET
Prestige 480 Dual BRI ISDN Router 3-1 4 Internet Access 3.7 Single User Account Typically, if there are multiple users on the LAN wanting to concurrently access the Internet, you will have to lease a block of legal, or globally unique, IP addresses from the ISP. The Single User Account (SUA ) featur...
Page 79 - Multiple Servers behind SUA; in the chapter; Dial -in Server Configuration; probing your network.
Prestige 480 Dual BRI ISDN Router Internet Access 3-1 5 The IP address for the SUA can be either fixed or dynamically assigned when a call is connected. In addition, you can designate servers using Menu 15 , e.g., a web server and a telnet server, on your local network and make them accessible to th...
Page 80 - Single User Account Configuration; a s; Figure 3-10 Menu 4 – Internet Access Setup for Single User Account; To enable the SUA feature in Menu 4, move the cursor to the; field and select; Single User Account; IP Address; SUA
Prestige 480 Dual BRI ISDN Router 3-1 6 Internet Access 3.7.2 Single User Account Configuration The steps for configuring your Prestige for Single User Account are identical to the conventional Internet access with the exception that you need to fil l in two extra fields in Menu 4 - Internet Access ...
Page 81 - Mega Bundle or Multiple ISPs Support; One remote node
Prestige 480 Dual BRI ISDN Router Internet Access 3-1 7 At this point, your Prestige will ask if you wish to test the Internet connection. If you select Yes , the Prestige will call the ISP and test the configuration. If the test fails, note the error messages on the screen and take the appropriate ...
Page 82 - ISP Remote Node and Supplementary Remote Node; “supplementary remote node”.; Configuring Mega Bundle; Configure an ISP remote node.; o r; Multilink; in; Edit PPP Options
Prestige 480 Dual BRI ISDN Router 3-1 8 Internet Access 3.8.2 ISP Remote Node and Supplementary Remote Node The pre vious ZyNOS versions supported only one ISP account. That remote node is called as the “ISP remote node”. Now in ZyNOS v2.42, you can setup other ISP accounts and this is called as “su...
Page 84 - Configuring Backup ISP Accounts; Active
Prestige 480 Dual BRI ISDN Router 3-2 0 Internet Access 3.10 Configuring Backup ISP Accounts If you have more than one ISP account, you can configure the secondary ISP as a backup. You can switch to the backup ISP in the event that the primary ISP is out of service. The SUA feature can be enabled fo...
Page 87 - Chapter 4; Remote Node Setup; To configure a remote node, follow these steps:; Main Menu; , select menu option 11 to open; Menu; When
Prestige 480 Dual BRI ISDN Router Remote Node Configuration 4-1 Chapter 4 Remote Node Configuration This chapter covers the parameters that are protocol independent. The p rotocol - dependent configuration (TCP/IP) is covered in the next chapter. A remote node is required for placing calls to a remo...
Page 88 - Figure 4-1 Menu 11 – Remote Node Setup
Prestige 480 Dual BRI ISDN Router 4-2 Remote Node Configuration Figure 4-1 Menu 11 – Remote Node Setup When Menu 11.1. - Remote Node Profile appears, fill in the fields as described in the table below to define this remote profile. The Remote Node Profile Menu Fields table shows how to configure the...
Page 89 - Figure 4-2 Menu 11.1 Remote Node Profile
Prestige 480 Dual BRI ISDN Router Remote Node Configuration 4-3 Figure 4-2 Menu 11.1 Remote Node Profile Table 4-1 Remote Node Profile Menu Fields Field Description Options Rem Node Name This is a required field [?]. Enter a descriptive name for the remote node, for example, Corp. This field can be ...
Page 90 - Editing PPP Options
Prestige 480 Dual BRI ISDN Router 4-4 Remote Node Configuration This field determines whether or not your Prestige will call back after receiving a call from this remote node. If this option is enabled, your Prestige will disconnect the initial call from this node and call it back at the Outgoing Pr...
Page 91 - This option only applies when the Prestige; cost is of no concern.; Outgoing Authentication Protocol
Prestige 480 Dual BRI ISDN Router Remote Node Configuration 4-5 and this remote node. When set to Leased , the Allocated Budget and Period do not apply. Leased Carrier Access Code This field allows you to select a specific carrier to take advantage of discount telephone rates. Enter the carriers acc...
Page 93 - Off
Prestige 480 Dual BRI ISDN Router Remote Node Configuration 4-7 Table 4-2 BTR v MTR for BOD BTR & MTR Setting No. of channel(s) used Max No. of channel(s) used Bandwidth on demand BTR = 64, MTR = 64 1 1 Off BTR = 64, MTR = 128 1 2 On BTR = 128, MTR = 128 2 2 Off BTR = 256, MTR = 256 4 4 On The M...
Page 94 - field in; Remote Node Profile; , and use the space bar to select; configure the PPP options fields.
Prestige 480 Dual BRI ISDN Router 4-8 Remote Node Configuration 4.1.6 Editing PPP Options To edit the remote node PPP Options, move the cursor to the Edit PPP Options field in Menu 11.1 - Remote Node Profile , and use the space bar to select Yes . Press [Enter] to open Menu 11.2 , as shown next. Fig...
Page 95 - Table 4-3 Remote Node PPP Options Menu Fields
Prestige 480 Dual BRI ISDN Router Remote Node Configuration 4-9 Table 4-3 Remote Node PPP Options Menu Fields Field Description Option Standard PPP Encapsulation Select the CISCO PPP only when this remote node is a Cisco machine; otherwise, select the Standard PPP. CISCO PPP Compression You can turn...
Page 96 - Edit Filter Sets; Use; filter; see Chapter 9; Figure 4-4 Menu 11.5 – Remote Node Filter
Prestige 480 Dual BRI ISDN Router 4-1 0 Remote Node Configuration 4.1.7 Remote Node Filter Move the cursor to the field Edit Filter Sets in Menu 11.1 , then press the space bar to toggle and set the value to YES . Press [ENTER] to open Menu 11.5 – Remote Node Filter . Use Menu 11.5 to specify the fi...
Page 97 - Chapter 5; to configure the TCP/IP parameters of a remote node.
Prestige 480 Dual BRI ISDN Router Remote Node TCP/IP Configuration 5-1 Chapter 5 Remote Node TCP/IP Configuration This chapter shows you an example of LAN-to-LAN application and explains how to configure the TCP/IP parameters of a remote node. 5.1 LAN-to-LAN Application A typical LAN-to- L A N appli...
Page 98 - LAN 1 Setup
Prestige 480 Dual BRI ISDN Router 5-2 Remote Node TCP/IP Configuration For the branch office, you need to configure a remote node in order to dial out to the headquarters. Additionally, you may also need to define static routes if some services reside beyond the immediate remote LAN. LAN 1 Setup Fig...
Page 99 - Figure 5-3 LAN 2 Setup; Remote Node Setup; Chapter 4 - Remote Node Configuration
Prestige 480 Dual BRI ISDN Router Remote Node TCP/IP Configuration 5-3 Figure 5-3 LAN 2 Setup 5.2 Remote Node Setup Follow the procedure in Chapter 4 - Remote Node Configuration to configure the protocol-independent parameters in Menu 11 - Remote Node Profile. For the TCP/IP parameters, follow the i...
Page 100 - My Wan; Chapter 3 –; Table 5-1 TCP/IP related fields in Remote Node Profile; Enter the IP address of the remote gateway in Remote Node Profile.; Remote Network; Local Network
Prestige 480 Dual BRI ISDN Router 5-4 Remote Node TCP/IP Configuration The following diagram explains the Sample IP Addresses to help you to understand the field of My Wan Addr in Menu 11.3. Figure 5-5 Sample IP Addresses for a TCPI/IP LAN-to -LAN Connection To configure the TCP/IP parameters of a r...
Page 101 - Menu 11.3 - Remote Node Network Layer Options; See Chapter
Prestige 480 Dual BRI ISDN Router Remote Node TCP/IP Configuration 5-5 The next table s hows the TCP/IP related fields in Menu 11.3 - Remote Node Network Layer Options . Table 5-2 TCP/IP Remote Node Configuration Rem IP Address This will show the IP address you entered for this remote node in the pr...
Page 102 - Figure 5-6 Example of Static Routing Topology
Prestige 480 Dual BRI ISDN Router 5-6 Remote Node TCP/IP Configuration 5.2.1 Static Route Setup Static routes tell the Prestige routing information that it cannot learn automatically through other means. This can arise in cases where RIP is disabled on the LAN or a remote network is beyond the one t...
Page 104 - Menu 12.1 – Edit IP Static Route Setup
Prestige 480 Dual BRI ISDN Router 5-8 Remote Node TCP/IP Configuration The following table describes the fields for Menu 12.1 – Edit IP Static Route Setup . Table 5-3 Edit IP Static Route Menu Fields Field Description Route Name Enter a descriptive name for this route. This is for identification pur...
Page 105 - Chapter 6; IPX Network Environment; network numbers is called a seed router.
Prestige 4 80 Dual BRI ISDN Router IPX Configuration 6- 1 Chapter 6 IPX Configuration This chapter shows you how to configure the IPX parameters of the Prestige. 6.1 IPX Network Environment Novell bundles the protocol stack, the server software and routing functionality in their NetWare server produ...
Page 106 - router; NetWare Server
Prestige 480 Dual BRI ISDN Router IPX Configuration 6- 2 Although there are four frame types available on the Ethernet, you should configure as few frame types as possible on your NetWare server and use automatic frame detection on the clients to simplify management and to reduce network overhead. N...
Page 107 - on the LAN or not, as depicted in the following diagram.; Prestige in an IPX Environment; NetWare; Assigns
Prestige 4 80 Dual BRI ISDN Router IPX Configuration 6- 3 6.2 Prestige in an IPX Environment There are two scenarios in which your Prestige is deployed, depending on whether there is a NetWare server on the LAN or not, as depicted in the following diagram. Prestige in an IPX Environment 6.2.1 Presti...
Page 108 - IPX Ethernet Setup; Menu 3 - Ethernet Setup
Prestige 480 Dual BRI ISDN Router IPX Configuration 6- 4 6.2.2 Prestige on LAN without Server Each IPX network must have a seed router. If you only have NetWare clients on your network, then you must configure the Prestige as a seed router and set up unique network numbers for each frame type enable...
Page 110 - Novell IPX Ethernet Setup Fields; Seed Router; Ethernet
Prestige 480 Dual BRI ISDN Router IPX Configuration 6- 6 The following table describes the Novell IPX Ethernet Setup Menu. Novell IPX Ethernet Setup Fields Field Description Options Seed Router Determine if your Prestige is to act as a see d router. Yes/No Frame Type Enable/Disable the individual fr...
Page 111 - LAN -to -LAN Application with Novell IPX; Head Office
Prestige 4 80 Dual BRI ISDN Router IPX Configuration 6- 7 6.5 LAN-to-LAN Application with Novell IPX A typical LAN-to- LAN application is to u se your Prestige to call from a branch office to the corporate headquarters to enable the stations in the branch office to access the NetWare servers at the ...
Page 112 - IPX Remote Node Setup
Prestige 480 Dual BRI ISDN Router IPX Configuration 6- 8 6.6 IPX Remote Node Setup Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu 11.1 - Remote Node Profile . For the IPX -specific parameters in Menu 11.3 - Remote Node Network Layer Options follow the inst...
Page 113 - Remote Node Novell IPX Options; make a call to that remote node.
Prestige 4 80 Dual BRI ISDN Router IPX Configuration 6- 9 The table below describes the IPX -specific parameters of the remote node setup. Remote Node Novell IPX Options Field Description Option Dial-On-Query This field is necessary for your Prestige on the client side. When set to Yes , any Get Ser...
Page 114 - Route
Prestige 480 Dual BRI ISDN Router IPX Configuration 6- 10 6.6.1 IPX Static Route Setup Similar to IP, IPX static routes tell the Prestige how to reach servers beyond a remote node before a connection to that remote node is established. From Menu 12 , select two, then select one of the IPX Static Rou...
Page 115 - Edit IPX Static Route Menu Fields; Server Name
Prestige 4 80 Dual BRI ISDN Router IPX Configuration 6-11 The following table contains the instructions on how to configure the Edit IP Static Route Menu. Edit IPX Static Route Menu Fields Field Description Server Name In this field, enter the name of the server. This must be the exact name configur...
Page 117 - Chapter 7; Bridging in General; demands more CPU cycles and memory.; Bridge Eth ernet Setup; Handle IPX; F r o m Menu 3 - Ethernet Setup, enter option; Bridge Setup; and
Prestige 4 80 Dual BRI ISDN Router Bridging Setup 7-1 Chapter 7 Bridging Setup This chapter shows you how to configure the bridging parameters of your Prestige. 7.1 Bridging in General Bridging bases the forwarding decision on the MAC (Media Access Control), or hardware address, while routing does i...
Page 118 - Handle IPX Field; None; Server
Prestige 480 Dual BRI ISDN Router 7-2 Bridging Setup Menu 3.5 - Bridge Ethernet Setup The following table describes how to configure the Handle IPX field in Menu 3.5. Bridge Ethernet Setup Menu - Handle IPX Field Configuration Handle IPX Field (Menu 3.5) Description None When there is no IPX traffic...
Page 119 - and press; Menu 11.3 - Remote Node Bridging Options; Bridge; Press the space bar to change it to; , your Prestige will not make the outgoing call.
Prestige 4 80 Dual BRI ISDN Router Bridging Setup 7-3 Step 2. Move the cursor to the Edit IP/IPX/Bridge field, then press the space bar to select Y e s and press [ Enter] to open Menu 11.3 - Network Layer Options . Menu 11.3 - Remote Node Bridging Options The following table describes the bridging-s...
Page 120 - Bridge S tatic Route Setup; then selecting one of the bridge static routes as shown next.
Prestige 480 Dual BRI ISDN Router 7-4 Bridging Setup Timeout (min) retain the Ethernet Addr information in its internal tables while the line is down. If this information is retained, your Prestige will not have to recompile the tables when th e line is brought back up. Once you have completed filli...
Page 122 - Bridge Static Route Menu Fields; Route Name
Prestige 480 Dual BRI ISDN Router 7-6 Bridging Setup The following table describes the Bridge Static Route Menu. Bridge Static Route Menu Fields Field Description Route Name Enter a name for the bridge static route for identification purposes. Active Activate/deactivate the static route. Ether Addre...
Page 123 - Chapter 8; Table 8-1 Remote Dial-in Users/Remote Nodes Comparison Chart; Remote Dial- in Users
Prestige 4 80 Dual BRI ISDN Router Dial-In Server Configuration 8-1 Chapter 8 Dial-in Server Configuration This chapter shows you how to configure your Prestige to receive calls from remote dial-in users, e.g., telecommuters, as well as remote nodes. There are several differences between dial- in us...
Page 124 - Remote Access Server; set the operational parameters for all dial- in users.; Figure 8-1 Example of Remote Access Server Application
Prestige 480 Dual BRI ISDN Router 8-2 Dial-In Server Configuration 8.1 Remote Access Server Telecommuting enables people to work at remote sites and yet still have access to the resources in the business office. Typically, a telecommu ter will use a client workstation with TCP/IP and dial-out capabi...
Page 126 - Figure 8-3 Menu 13 – Default Dial-in Setup; From the Main Menu, enter 13 to go to; Menu 13 – Default Dial -in Setup; . This section describes how to; Default Dial -in Setup
Prestige 480 Dual BRI ISDN Router 8-4 Dial-In Server Configuration 8.3 Default Dial-in Setup This section covers the default dial-in parameters. The parameters in Menu 13 affect incoming calls from both remote dial- in users, and remote nodes until authentication is completed. Once authentication is...
Page 128 - see Chapter 9 - Filter
Prestige 480 Dual BRI ISDN Router 8-6 Dial-In Server Configuration Callback Budget Management: Allocated Budget (min) This field sets the budget callback time for all the remote dial-in users. The default for this field is 0 for no budget control. Default = 0 Period (hr) This field sets the time int...
Page 129 - Use this menu; field. The default is no
Prestige 4 80 Dual BRI ISDN Router Dial-In Server Configuration 8-7 8.3.1 Default Dial-in Filter Move cursor to the field Edit Filter Sets in Menu 13 , press space bar to toggle and set the value to Yes an d then press [Enter] to open Menu 13.1 – Default Dial-in Filter. Use this menu to specify the ...
Page 132 - seconds; Figure 8-7 Remote Access Example
Prestige 480 Dual BRI ISDN Router 8-1 0 Dial-In Server Configuration Idle Time-out Enter the idle time (in seconds). This time-out determines how long the dial-in user can be idle before your Prestige disconnects the call when the Prestige is calling back. Idle time is defined as the period of time ...
Page 133 - Configuring your Prestige
Prestige 4 80 Dual BRI ISDN Router Dial-In Server Configuration 8-11 Configuring your Prestige Figure 8-8 Configuring Menu 13 for Remote Access Figure 8-9 Edit Dial-in-User for RAS Menu 13 - Default Dial -i n S e t u p Telco Options: CLID Authen= None PPP Options: Recv Authen= PAP Compression= Yes M...
Page 134 - company must support caller ID.
Prestige 480 Dual BRI ISDN Router 8-1 2 Dial-In Server Configuration Note : The caller always controls Idle Timeout, so the Idle Timeout field does not apply when there is callback. 8.4.2 CLID Authentication CLID (Calling Line IDentification) authentication affords you the security of limiting a use...
Page 135 - Call Direction
Prestige 4 80 Dual BRI ISDN Router Dial-In Server Configuration 8-1 3 Figure 8-10 LAN 1 LAN-t o-LAN Application LAN 2 Figure 8-11 LAN2 LAN-to -LAN Application Menu 11.1 - Remote Node Profile Rem Node Name= LAN_2 Active= Yes Call Direction= Both Incoming: Rem Login= lan2 Rem Password= ****** * Rem CL...
Page 136 - Figure 8-12 Testing Callback with your Connection; Configuring the Prestige for Callback with CLID; Prestige on LAN 2
Prestige 480 Dual BRI ISDN Router 8-1 4 Dial-In Server Configuration Testing Callback with your Connection Go to Menu 24.4.5 of the Prestige on LAN 1 and enter the numbers that correspond to the menu in the above LAN 1. Figure 8-12 Testing Callback with your Connection 8.4.4 Configuring the Prestige...
Page 137 - Figure 8-13 Callback with CLID Configuration; This is how
Prestige 4 80 Dual BRI ISDN Router Dial-In Server Configuration 8-1 5 Figure 8-13 Callback with CLID Configuration Menu 11.1 - Remote Node Profile Rem Node Name= LAN_1 Active= Yes Call Direction= Both Incoming: Rem Login= lan1 Rem Password= ******* Rem CLID= 1234 Call Back= Yes Outgoing: My Login= l...
Page 138 - Figure 8-14 Configuring CLID with Callback; Testing your Connection with Callback and CLID; Rem CLID; Set this field; Required
Prestige 480 Dual BRI ISDN Router 8-1 6 Dial-In Server Configuration Menu 13 Figure 8-14 Configuring CLID with Callback Testing your Connection with Callback and CLID Go to Menu 24.8 (Prestige on LAN 2) and type “sys trcl call”. The Prestige displays all communication traces as shown in the next fig...
Page 139 - Figure 8-15 Callback and CLID Connection Test; Multiple Servers behind SUA; Multiple Server Configuration
Prestige 4 80 Dual BRI ISDN Router Dial-In Server Configuration 8-1 7 Figure 8-15 Callback and CLID Connection Test 8.5 Multiple Servers behind SUA If you wish, you can make inside servers for different services, e.g., web or FTP, visible to the outside users, even though SUA makes your whole inside...
Page 140 - Enter 15 in the main menu to go to; Menu 15, Multiple Server Configuration; Enter an index number in menu 15 to go to; ESC; at any time to cancel.; Figure 8-16 Multiple Server Configuration; The most often used port numbers are:
Prestige 480 Dual BRI ISDN Router 8-1 8 Dial-In Server Configuration 8.5.1 Configuring a Server behind SUA Follow the steps below to configure a server behind SUA: 1. Enter 15 in the main menu to go to Menu 15, Multiple Server Configuration . 2. Enter an index number in menu 15 to go to Menu 15.1, S...
Page 141 - Services
Prestige 4 80 Dual BRI ISDN Router Dial-In Server Configuration 8-1 9 Services Port Number FTP (File Transfer Protocol) 21 Telnet 23 SMTP (Simple Mail Transfer Protocol) 25 DNS(Domain Name System) 53 HTTP (Hyper Text Transfer protocol or WWW, Web) 80 PPTP (Point-to-Point Tunneling Protocol) 1723
Page 143 - Chapter 9; About Filtering; information and examples on creating and configuring filters; The Filter Structure of the Prestige
Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9-1 Chapter 9 Filter Configuration This chapter shows you how to create and apply filter(s). 9.1 About Filtering Your Prestige uses filters to decide whether or not to allow passage of a packet. Data filters are further divided into incoming an...
Page 144 - Filter Set; Figure 9-1 Filter Rule Process
Prestige 480 Dual BRI ISDN Router 9-2 Filter Configuration Start Packet into Filter Accept Packet Drop Packet Fetch Next Filter Set Next Filter Set Available? Yes Filter Set Fetch FirstFilter Rule Execute Filter Rule Next Filter Rule Available? Fetch Next Filter Rule No Fetch First Filter Set Yes Ch...
Page 145 - Configuring a Filter Set; To configure a filter sets, follow the procedure below:; Filter Set Configuration; from the Main Menu to open Menu 21.; Figure 9-2 Menu 21 - Filter Set Configuration; Press; Summary
Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9-3 9.2 Configuring a Filter Set To configure a filter sets, follow the procedure below: Step 1. Select option 21. Filter Set Configuration from the Main Menu to open Menu 21. Figure 9-2 Menu 21 - Filter Set Configuration Step 2. Select the fil...
Page 146 - Table 9-1 Abbreviations Used in the Filter Rules Summary Menu; Abbreviations
Prestige 480 Dual BRI ISDN Router 9-4 Filter Configuration Figure 9-3 Menu 21.1 - Filter Rules Summary Figure 9-4 Menu 21.2 - Filter Rules Summary 9.2.1 Filter Rules Summary Menus The preceeding screens show summaries of the existing rules in the filter set. The following tables contain a brief desc...
Page 148 - Table 9-2 Abbreviations used if Filter Type is IP; Table 9-3 Abbreviations used if Filter Type is GEN; Abbreviation; Configuring a Filter Rule; Generic
Prestige 480 Dual BRI ISDN Router 9-6 Filter Configuration Table 9-2 Abbreviations used if Filter Type is IP Abbreviation Description Pr Protocol SA Source Address SP Source Port number DA Destination Address DP Destination Port number l If the filter type is GEN (generic), the following abbreviatio...
Page 149 - Figure 9-5 Protocol and Device Filter Sets
Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9-7 9.3.1 Filter Types and SUA There are two categories of filter rules, Device Filter (Generic) rules and Protocol Filter (TCP/ IP) rules. Device Filter rules act on the raw data from/to LAN and WAN. Protocol Filter rules act on the IP packets...
Page 150 - Table 9-4 TCP/IP Filter Rule Menu Fields
Prestige 480 Dual BRI ISDN Router 9-8 Filter Configuration 9.3.2 TCP/IP Filter Rule This section shows you how to configure a TCP/IP filter rule. TCP/IP rules allow you to base the rule on the fields in the IP and the upper layer protocol, e.g., UDP and TCP, headers. To configure a TCP/IP rules, sel...
Page 153 - Figure 9-7 Executing a Filter Rule
Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9-11 Packet into IP Filter Matched Matched Yes Action Matched Action Not Matched More? No Filter Active? Check IP Protocol Drop Drop Packet Accept Packet Drop Forward Check Next Rule Check Next Rule Check Next Rule Forward Not Matched Yes No Ch...
Page 154 - Generic Filter Rule; in the Filter Type f ield
Prestige 480 Dual BRI ISDN Router 9-1 2 Filter Configuration 9.3.3 Generic Filter Rule This section shows you how to configure a generic filter rule. The purpose of generic rules is to allow you to filter non-IP packets. For IP, it is generally easier to use the IP rules directly. For generic rules,...
Page 155 - Table 9-5 Generic Filter Rule Menu Fields
Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9-1 3 Table 9-5 Generic Filter Rule Menu Fields Field Description Option Filter # This is the filter set, filter rule co-ordinates, i.e., 2,3 refers to the second filter set and the third rule of that set. Filter Type Use the space bar to toggl...
Page 156 - IPX Filter Rule; from the; Filter Type
Prestige 480 Dual BRI ISDN Router 9-1 4 Filter Configuration 9.3.4 IPX Filter Rule This section shows you how to configure an IPX Filter Rule. IPX filters allow you to base the rules on the fields in the IPX headers. To configure an IPX rule, select IPX Filter Rule from the Filter Type field and pre...
Page 157 - Table 9-6 IPX Filter Rule Menu Fields; IPX Packet Type
Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9-1 5 The table below describes the IPX Filter Rule. Table 9-6 IPX Filter Rule Menu Fields Field Description IPX Packet Type Enter the IPX packet type (1-byte in hexadecimal) you wish to filter. The popular types are (in hexadecimal): 01 - RIP ...
Page 158 - Applying Filters and Factory Defaults; Menu 21 - Filter Set Configuration; Factory
Prestige 480 Dual BRI ISDN Router 9-1 6 Filter Configuration 9.4 Applying Filters and Factory Defaults This section shows you where to apply the filter(s) after you design it (them). Two sets of factory default filter rules have been configured in Menu 21 to prevent NetBIOS traffic from triggering c...
Page 159 - Figure 9-11 Filtering Remote Node traffic
Prestige 4 80 Dual BRI ISDN Router Filter Configuration 9-1 7 Figure 9-11 Filtering Remote Node traffic 9.4.3 Default Dial-in Filter Use Menu 13.1 Default Dial -in Filter to specify the filter set(s) to apply to the incoming and outgoing traffic between all dial- in users and your Prestige. Note tha...
Page 161 - This chapter explains how to configure SNMP.; Configuring SNMP; To configure SNMP, select option; SNMP Configuration; from the Main Menu to open Menu 22 SNMP
Prestige 4 80 Dual BRI ISDN Router SNMP Configuration 10- 1 Chapter 10 SNMP Configuration This chapter explains how to configure SNMP. 10.1 About SNMP SNMP (Simple Network Management Protocol) is a protocol for network management and monitoring. Your Prestige supports SNMP agent functionality, which...
Page 162 - Figure 10-1 Menu 22 - SNMP Configuration
Prestige 480 Dual BRI ISDN Router 10- 2 SNMP Configuration Figure 10-1 Menu 22 - SNMP Configuration
Page 163 - Ta ble 10-1 SNMP Configuration Menu Fields; Menu 22 - SNMP Configuration
Prestige 4 80 Dual BRI ISDN Router SNMP Configuration 10- 3 The following table describes the SNMP configuration parameters. Ta ble 10-1 SNMP Configuration Menu Fields Field Description Default Get Community Enter the get community, which is the password for the incoming Get- and Get Next - requests...
Page 165 - external authentication server.; Changing the System Password; To change the system password , follow the steps shown next:; System Security; in the Main Menu to open; Menu 23 – System Security
Prestige 4 80 Dual BRI ISDN Router System Security 11- 1 Chapter 11 System Security This chapter helps you to change the system password and to configure an external authentication server. 11.1 Changing the System Password To change the system password , follow the steps shown next: Step 1. Select o...
Page 166 - Change Password
Prestige 480 Dual BRI ISDN Router 11- 2 System Security Step 2. From the System Security Menu, select option Change Password to open Menu 23.1 - System Security - Change Password . Step 3. Enter your existing system password and press [Enter] . Figure 11-2 Menu 23.1 - System Security - Change Passwo...
Page 167 - Using RADIUS Authentication
Prestige 4 80 Dual BRI ISDN Router System Security 11- 3 11.2 Using RADIUS Authentication Your Prestige has a built -in dial-up user list; however, the number of users that can be stored locally is limited due to memory constraints. If you have more users than what the Prestige can store locally, us...
Page 169 - . Select option 2, External Server from this menu to open; External Server
Prestige 4 80 Dual BRI ISDN Router System Security 11- 5 11.2.2 RADIUS Server Configuration To configure the RADIUS server, select option 23, System Security, from the Main Menu to open Menu 23 - System Security . Select option 2, External Server from this menu to open Menu 23.2 - System Security - ...
Page 170 - Table 11-1 System Security - External Server Menu Fields; client; Adding Users to the RADIUS Database; users
Prestige 480 Dual BRI ISDN Router 11- 6 System Security The fields in the System Security - External Server Menu are listed in the following table. Table 11-1 System Security - External Server Menu Fields Field Description Default Active Determines whether the external security facility is enabled. ...
Page 171 - Using RADIUS Authentication for CLID; To use RADIUS for CLID authentication, create a user record in the; RADIUS Accounting; can be configured in; Menu 24.3.3 – System Maintenance – Accounting Server
Prestige 4 80 Dual BRI ISDN Router System Security 11- 7 11.2.5 Using RADIUS Authentication for CLID To use RADIUS for CLID authentication, create a user record in the users file where the user name (the first field) is the telephone number, and the password (the second field) is always Zyxel-CLID (...
Page 172 - Table 11-2 System Maintenance – Accounting Server Fields; Figure 11-5 Examples of RADIUS Accounting Message
Prestige 480 Dual BRI ISDN Router 11- 8 System Security The fields in Menu 24.3.3 are listed in the following table. Table 11-2 System Maintenance – Accounting Server Fields Field Description Active Determines whether the accounting facility is on or off. Type Determines the type of the accounting s...
Page 173 - Table 11-3 Accounting Attributes; Specifies the user name.
Prestige 4 80 Dual BRI ISDN Router System Security 11- 9 The following table describes the accounting attributes mentioned in the above example. Note: Accounting attributes may vary depending on the external server. Table 11-3 Accounting Attributes Field Description Acct-Status -Type Account Status ...
Page 175 - Telnet Configuration and Capabilities; About Telnet Configuration
Prestige 4 80 Dual BRI ISDN Router Telnet Conf iguration 12- 1 Chapter 12 Telnet Configuration and Capabilities This chapter discusses using telnet to remotely configure your Prestige . 12.1 About Telnet Configuration Before the Prestige is properly setup for TCP/IP, the only option for configuring ...
Page 176 - Figure 12-1 Telnet Configuration on a TCP/IP Network; Telnet Under SUA; the status in
Prestige 480 Dual BRI ISDN Router 12- 2 Telnet Configuration Figure 12-1 Telnet Configuration on a TCP/IP Network 12.2 Telnet Under SUA When Single User Account (SUA) is enabled and an inside server is specified, telnet connections from the outside will be forwarded to the insid e server. So to conf...
Page 177 - This chapter covers the diagnostic tools that help you to; Menu 24 - System Maintenance
Prestige 4 80 Dual BRI ISDN Router System Maintenance 13- 1 Chapter 13 System Maintenance This chapter covers the diagnostic tools that help you to maintain your Prestige. These tools include updates on system status, port status, log and trace capabilities and upgrades for the system software. This...
Page 178 - System Status
Prestige 480 Dual BRI ISDN Router 13- 2 System Maintenance 13.1 System Status The first selection, System Status, gives you information on the vers ion of your system firmware and the status and statistics of the ports, as shown next. System Status is a tool that can be used to monitor your Prestige...
Page 179 - Press Command; field you will see the following menu:; Figure 13-3 Menu 24.1 after Toggle Status; The following table describes the fields present in; Table 13-1 System Maintenance - Status Menu Fields
Prestige 4 80 Dual BRI ISDN Router System Maintenance 13- 3 If you enter 9 in the Press Command field you will see the following menu: Figure 13-3 Menu 24.1 after Toggle Status The following table describes the fields present in Menu 24.1 - System Maintenance - Status . It should be noted that these...
Page 181 - Figure 13-4 LAN Packet That Triggered Last Call; Source IP Address
Prestige 4 80 Dual BRI ISDN Router System Maintenance 13- 5 The following figure shows two e xamples of triggering packets from the LAN: the first of an ICMP ping packet (Type: IP) and the second a SAP broadcast packet (Type: Raw). With this information, you can determine the workstation from the so...
Page 182 - Figure 13-5 System Maintenance - Information
Prestige 480 Dual BRI ISDN Router 13- 6 System Maintenance 13.1.1 System Information Figure 13-5 System Maintenance - Information Table 13-2 Fields in System Maintenance Field Description Name displays the system name of your Prestige. This information can be modified in Menu 1 - General Setup . Rou...
Page 183 - Console Port Speed
Prestige 4 80 Dual BRI ISDN Router System Maintenance 13- 7 13.1.2 Console Port Speed You can change the console port speed through Menu 24.2.2 – Console Port Speed . Your Prestige supports 9600 , 19200, 38400, 57600, and 115200bps for the console port. Use the space bar to select the desired speed ...
Page 185 - Figure 13-7 Examples of Error and Information Messages; syslog server. Syslog and accounting can be configured in; Syslog and Accounting,
Prestige 4 80 Dual BRI ISDN Router System Maintenance 13- 9 Examples of typical error and information messages are presented in the following figure. Figure 13-7 Examples of Error and Information Messages 13.2.2 Syslog And Accounting The Prestige uses the UNIX syslog facility to log the CDR (Call De...
Page 187 - Table 13-3 System Maintenance Menu - UNIX Syslog Parameters; Parameter; CDR
Prestige 4 80 Dual BRI ISDN Router System Maintenance 13- 11 You need to configure the parameters described in the table below to activate syslog. Table 13-3 System Maintenance Menu - UNIX Syslog Parameters Parameter Description Active Use the space bar to turn on or off syslog. Syslog IP Address En...
Page 188 - Packet triggered
Prestige 480 Dual BRI ISDN Router 13- 12 System Maintenance 2. Packet triggered Jul 19 11:28:39 192.168.102.2 ZyXEL Communications Corp.: Packet Tri gger: Protocol=1, Data=4500003c100100001f010004c0a86614ca849a7b08004a5c020001006162636465666768696a6b6c6d6e6f 7071727374 Jul 19 11:28:56 192.168.102.2 ...
Page 190 - Table 13-4 System Maintenance Menu Diagnostic; Reset ISDN
Prestige 480 Dual BRI ISDN Router 13- 14 System Maintenance The following table describes the diagnostic tests available in Menu 24.4 for your Prestige and the connections. Table 13-4 System Maintenance Menu Diagnostic Field Description Hang Up B1 Call This tool hangs up the B1 channel. This is only...
Page 191 - Manual Call; Figure 13-1 0 Trace Display for a Successful Manual Call; This figure shows a trace example where authentication failed.; Figure 13-11 Trace Display for a Failed Authentication
Prestige 4 80 Dual BRI ISDN Router System Maintenance 13- 15 The following figure shows an example of a successful connection after selecting option Manual Call in Menu 24.4. Figure 13-1 0 Trace Display for a Successful Manual Call This figure shows a trace example where authentication failed. Figur...
Page 192 - Boot Module Command; Figure 13-1 2 Boot Module Commands
Prestige 480 Dual BRI ISDN Router 13- 16 System Maintenance 13.4 Boot Module Command Prestige boot module commands are shown next. For ATBAx, x denotes the number preceding the colon to give the baud rate following the colon in the list of numbers that follows; e.g. ATBA3 will give a baud of 9.6 Kbp...
Page 193 - Command Interpreter Mode; visit the ZyXEL Web site or send e-mail to the ZyXEL Support Group.; Figure 13-1 3 Command Mode; before it is added to the blacklist and the interim between calls.
Prestige 4 80 Dual BRI ISDN Router System Maintenance 13- 17 13.5 Command Interpreter Mode This option allows you to enter the command interpreter mode(CI). A list of valid commands can be found by typing [help] at the command prompt. For more detailed information, check your PNC installation disc o...
Page 194 - Maintenance - Call Control
Prestige 480 Dual BRI ISDN Router 13- 18 System Maintenance phone number is put in the blacklist. You will have to enable the number manually before the Prestige will dial that number again. Call history chronicles preceding incoming and outgoing calls. To enter the call control menu, select option ...
Page 195 - Table 13-5 Call Control Parameters Fields; Retry Counter; shows the list of telephone numbers that have been blacklisted.
Prestige 4 80 Dual BRI ISDN Router System Maintenance 13- 19 Table 13-5 Call Control Parameters Fields Field Description Dialer Timeout: Digital Call (sec) The Prestige will timeout if it cannot set up an outgoing digital call within the timeout value. Retry Counter How many times a busy or ‘no answ...
Page 197 - Figure 13-1 8 Call History
Prestige 4 80 Dual BRI ISDN Router System Maintenance 13- 21 13.6.4 Call History This is the fourth option in Call Control and relays information about past incoming and outgoing calls. Figure 13-1 8 Call History Table 13-6 Call History Fields Field Description Phone Number This is the telephone num...
Page 198 - Time and Date Setting; Figure 13-1 9 System Maintenance – Time and Date Setting
Prestige 480 Dual BRI ISDN Router 13- 22 System Maintenance 13.7 Time and Date Setting Menu 24.10 allows you to update the time and date settings of your Prestige 480. Figure 13-1 9 System Maintenance – Time and Date Setting Table 13-7 Time and Date Setting Fields Field Description New Time Enter th...
Page 201 - Backup, Restore and Upload; Backup Configuration; Option; Menu 24 - System Maintenance; allows you to backup the current Prestige configuration to; Figure 14-1 Menu 24.5 – Backup Configuration using the Console Port
Prestige 4 80 Dual BRI ISDN Router Backup, Restore and Upload 14- 1 Chapter 14 Backup, Restore and Upload You can perform the backup, restore and upload through the console port, TFTP or FTP. Any serial communications program should work fine; however, you must use XMODEM protocol to perform the dow...
Page 202 - Figure 14-2 Receive File; open
Prestige 480 Dual BRI ISDN Router 14- 2 Backup, Restore and Upload Step 2. Press “Y” to indicate that you want to continue. The following procedure is for the HyperTerminal program. The procedure for other serial communications programs should be similar. Step 3. Click “Transfer” in the HyperTermina...
Page 203 - Menu 24 – System; sys stdio 0
Prestige 4 80 Dual BRI ISDN Router Backup, Restore and Upload 14- 3 Step 3. Locate the “ rom-spt ” file. Step 4. Type get rom-spt to backup the current Prestige configuration to your workstation. For details on FTP commands, please consult the documentation of your FTP client program. 14.1.3 Back up...
Page 204 - Example Using Walusoft TFTP Client; Restore Configuration; Menu 24 – System Maintenance; allows you to restore the current workstation backup
Prestige 480 Dual BRI ISDN Router 14- 4 Backup, Restore and Upload Example Using Walusoft TFTP Client Figure 14-4 TFTP Example 14.2 Restore Configuration Option 6 from Menu 24 – System Maintenance allows you to restore the current workstation backup configuration to your Prestige. 14.2.1 Restore usi...
Page 205 - Figure 14-5 Menu 24.6 – Restore Configuration using the Console Port; Choose the
Prestige 4 80 Dual BRI ISDN Router Backup, Restore and Upload 14- 5 Please note that the system reboots automatically after the file transfer process is complete. Figure 14-5 Menu 24.6 – Restore Configuration using the Console Port Step 1. Go to Menu 24.6 . Step 2. Press “Y” to indicate that you wan...
Page 207 - Firmware Update; Menu 24 – System Mainten ance; takes you to; Menu 24.7 – System Maintenance –; transfer process is complete.
Prestige 4 80 Dual BRI ISDN Router Backup, Restore and Upload 14- 7 Step 5. Go to SMT menu 24.6. Note that you must remain in this menu until file transfer is complete. Step 6. Use the TFTP client to transfer files between the Prestige and the workstation. The remote file name on the Prestige is “ro...
Page 212 - Figure 14-1 3 Username Prompt; To upload the firmware file, transfer the local
Prestige 480 Dual BRI ISDN Router 14- 12 Backup, Restore and Upload Figure 14-1 2 Edit Host Step 4. Press 'OK' to ignore the 'Username' prompt. Figure 14-1 3 Username Prompt Step 5. To upload the firmware file, transfer the local 'ras' file to overwrite the remote 'ras' file. To upload the configura...
Page 213 - Figure 14-1 4 Files Transfer
Prestige 4 80 Dual BRI ISDN Router Backup, Restore and Upload 14- 13 Figure 14-1 4 Files Transfer The system reboots after a successful upload. 14.3.3 Upload using TFTP In addition to the direct console port connection, the Prestige supports the up/downloading of the firmware and the configuration f...
Page 215 - IP Policy Routing; different users through different connections.
Prestige 4 80 Dual BRI ISDN Router IP Policy Routing 15- 1 Chapter 15 IP Policy Routing 15.1 Introduction Traditionally, routing is based on the destination address only and the router takes the shortest path to forward a packet. IP Policy Routing (IPPR) provides a mechanism to override the default ...
Page 217 - Menu 25 - IP Routing Policy Summary
Prestige 4 80 Dual BRI ISDN Router IP Policy Routing 15- 3 Menu 25.1 shows the summary of a policy set, including the criteria and the actio n of a single policy, and whether a policy is active or not. Each policy contains two lines. The former part is the criteria of the incoming packet, and the la...
Page 218 - IP Routing Policy Summary
Prestige 480 Dual BRI ISDN Router 15- 4 IP Policy Routing IP Routing Policy Summary Abbreviation Meaning Criteria SA Source IP address SP Source port DA Destination IP address DP Destination port P IP layer 4 protocol number(TCP=6,UDP=17…) T Type Of Service of Incoming packet PR Precedence of incomi...
Page 219 - Table 15-1 IP Routing Policy Menu Fields
Prestige 4 80 Dual BRI ISDN Router IP Policy Routing 15- 5 Figure 15-1 Menu 25.1.1 - IP Routing Policy Table 15-1 IP Routing Policy Menu Fields Field Description Policy Set Name This is the name of the policy set assigned in Menu 25 - IP Routing Policy Setup. Active Press the spacebar to select Yes ...
Page 220 - Gateway addr; if you want to assign the gateway IP address by; Gateway node
Prestige 480 Dual BRI ISDN Router 15- 6 IP Policy Routing port start= / end= Source port number range from start to end; applicable only for TCP/UDP. Destination: addr start= / end= Destination IP address range from start to end. port start= / end= Destination port number range from start to end; ap...
Page 221 - Applying an IP Policy; Enter your IP
Prestige 4 80 Dual BRI ISDN Router IP Policy Routing 15- 7 15.2 Applying an IP Policy This section shows you where to apply the IP Policies after you design them. 15.2.1 Ethernet IP Policies From Menu 3 - Ethernet Setup , enter 2 to go to Menu 3.2 –TCP/IP Ethernet Setup . You can choose up to four I...
Page 223 - Troubleshooting; the problem persists e- mail or call your dealer for assistance.; Problems Starting Up the Prestige; Table 16-1 Troubleshooting the Start-Up of your Prestige; Problem; Check the connection between the DC adapter and the Prestige.
Prestige 4 80 Dual BRI ISDN Router Troubleshooting 16- 1 Chapter 16 Troubleshooting This chapter covers the potential problems you may run into and the possible remedies. After each problem description, some instructions are provided to help you to diagnose and to solve the problem. If you still hav...
Page 224 - You can rectify this problem by using the Internet Access Setup
Prestige 480 Dual BRI ISDN Router 16- 2 Troubleshooting The Prestige drops the call even though the authentication phase was successful. Check the IP address of the remote node. The Prestige uses the IP address as another form of authentication. Hence, if the address supplied by the remote node does...
Page 225 - Problems With the ISDN Lines; Table 16-2 Troubleshooting the ISDN Lines
Prestige 4 80 Dual BRI ISDN Router Troubleshooting 16- 3 16.2 Problems With the ISDN Lines Table 16-2 Troubleshooting the ISDN Lines Problem Corrective Action Check the error log (in Menu 24.3.1 ), you should see a log entry for the ISDN initialization failure in the format, ‘ ISDN init failed. code...
Page 226 - Problems with the Ethernet Connection; Table 16-3 Troubleshooting the Ethernet Connection; Problems Connecting to a Remote Node or ISP; Table 16-4 Troubleshooting a Connection to a Remote Node or ISP
Prestige 480 Dual BRI ISDN Router 16- 4 Troubleshooting 16.3 Problems with the Ethernet Connection Table 16-3 Troubleshooting the Ethernet Connection Problem Corrective Action Check the Ethernet LED’s on the front panel. The LNK LED should be on when the Prestige has made a successful Ethernet conne...
Page 227 - Problems for Remote User to Dial-in; Table 16-5 Troubleshooting for Remote Users to Dial-in
Prestige 4 80 Dual BRI ISDN Router Troubleshooting 16- 5 16.5 Problems for Remote User to Dial-in Table 16-5 Troubleshooting for Remote Users to Dial-in Problem Corrective Action First verify that you have configured the authentication parameters in Menu 13. These would be CLID Authen and Recv. Auth...
Page 229 - Information Worksheet; General Information
Prestige 4 80 Dual BRI ISDN Router Worksheet A Information Worksheet This information worksheet has been provided to help you collect the following information for future use. General Information System Name Protocol Routing q TCP/IP ISDN Information Switch Type q DSS1 B-Channel Usage q Switch/Switc...
Page 230 - ISDN Information; ISDN Setup Menus; Hardware Installation and Setup; Ethernet Information; Internet Access
Prestige 480 Dual BRI ISDN Router Worksheet B General Information The Prestige requires certain system information. You can obtain all the pertinent information from your network administrator. System Name - This is the name given by you in Menu 1 to the Prestige for identification purpose. Prot oco...
Page 231 - Table 16-6 IP Subnet Masks and the Number of Hosts
Prestige 4 80 Dual BRI ISDN Router Worksheet C The table below lists some examples of IP subnet masks and the number of hosts that are allowed. Consult your network administrator if you are unsure of this value. Table 16-6 IP Subnet Masks and the Number of Hosts IP Subnet Mask Number of Host ID’s Nu...
Page 233 - Enhanced Syslog
Prestige 4 80 Dual BRI ISDN Router Enhanced Syslog E Enhanced Syslog The following are the message formats that Syslog sends to the server. CDR SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String ); String = board xx line xx channel xx, call xx, str board = the hardware board ID line = the WAN ID in a ...
Page 235 - Acronyms and Abbreviations
Prestige 4 80 Dual BRI ISDN Router Acronyms and Abbreviations G Acronyms and Abbreviations BAP/BACP Bandwidth Allocation Protocol/Bandwidth Allocation Control protocol BOD Bandwidth on Demand CDR Call Detail Record CHAP Challenge Handshake Authentication Protocol CLID Calling Line IDentification CSU...
Page 237 - Index; See
Prestige 4 80 Dual BRI ISDN Router Index I Index 8 802.2, 6-1 802.3, 6-1 A acronyms and abbreviations, G authentication protocol, 4-5 auto-negotiation, 1-2 B backup configuration, 14-1 BACP, 4-6 Bandwidth on Demand. See BOD BAP, 1-3, 4-6 Base Transmission Rate, 4-6 blacklist, 13-17 BOD, 1-3, 4-6, 4-...
Page 238 - Filter
Prestige 480 Dual BRI ISDN Router Inde x J Filter IPX Packet Types, 9-14 filter log, 13-9 frame type, 6-1 front panel, 2-1 G gateway , 7-5 gateway IP address, 5-8 general setup, 2-10 generic filter rule, 9-11 H housing, 2-4 I IANA, 3-2 idle timeout, 4-5 Interactive Applications, 15-1 Internet access...
Page 239 - PABX
Prestige 4 80 Dual BRI ISDN Router Index K Configuration, 3-16 MP, 4-6 Multilink. See M P Multiple ISPs Support. See Mega Bundle multiple servers, 8-16 N nailed-up connection, 4-5 NetCAPI, 2-14 CAPI, 2-14 ISDN-DCP, 2-14 RVS-CE and RVS-COM Lite, 2-15 NetCAPI Configuration, 2-16 P PABX , 2-13 packet t...
Page 240 - System Management Terminal.
Prestige 480 Dual BRI ISDN Router Inde x L FTP, 14-2 TFTP, 14-2 Restore, 14-4 Console Port, 14-4 FTP, 14-6 TFTP, 14-6 system management, 13-1 System Management Terminal. See S M T system status, 13-2 T target utility, 4-7 TCP/IP, 3-2, 3-4, 5-1, 13-12, B TCP/IP filter rule, 9-7 Telco options, 3-11 te...
Zyxel G-360
Manual
Zyxel 35
Manual
Zyxel PLA4225
Manual
Zyxel G-170S
Manual
Zyxel 128MH
Manual
Zyxel Vantage Access
Manual
Zyxel PLA-4xx
Manual
Zyxel DMA-1000 Series
Manual
Zyxel AG-100
Manual
Zyxel P-872H
Manual
Zyxel P-660RU Series
Manual
Zyxel NSA310
Manual
Zyxel PLA-400 v2
Manual
Zyxel Wireless PCI Adapter
Manual
Zyxel NWD2105
Manual
Zyxel plx111
Manual