Page 2 - ISDN Router and Router/Hub; Copyright
Prestige 100 and 100IH ISDN Router and Router/Hub ii Prestige 100 and 100IH ISDN Router and Router/Hub Copyright Copyright © 2/26/1999 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole,transcribed, stored in a retrieval system, tran...
Page 3 - The declarations of CE marking:
Prestige 100 and 100IH ISDN Router and Router/Hub ECC Interference Statement iii The declarations of CE marking: The Prestige 100 and 100IH has been approved for connection to the Public SwitchedTelecommunication Network using interfaces compatible with ITU-TSS recommendation I.420 (BasicRate ISDN u...
Page 4 - ZyXEL Limited Warranty; Note
Prestige 100 and 100IH ISDN Router and Router/Hub iv ZyXEL Limited Warranty ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from anydefects in materials or workmanship for a period of up to two (2) years from the date ofpurchase. During the warran...
Page 5 - Customer Support
Prestige 100 and 100IH ISDN Router and Router/Hub Customer Support v Customer Support If you have questions about your ZyXEL product or desire assistance, contact ZyXELCommunications Corporation offices worldwide, in one of the following ways: Method America Scandinavia Rest of the World E-Mail-Tech...
Page 7 - Table of Contents
Prestige 100 and 100IH ISDN Router and Router/Hub Table of Contents vii Table of Contents Prestige 100 and 100IH ............................................................................................................. 1 User's Guide..................................................................
Page 11 - List of Figures
Prestige 100 and 100IH ISDN Router and Router/Hub List of Figures/Tables xi List of Figures Figure 1-1 Internet Access Application ...................................................................................................1-4 Figure 1-2 LAN-to-LAN Connection Application ........................
Page 14 - List of Tables
Prestige 100 and 100IH ISDN Router and Router/Hub xiv List of Figures/Tables List of Tables Table 2-1 LED functions ........................................................................................................................ 2-1 Table 2-2 LED functions ......................................
Page 16 - Preface; About Your Prestige; Congratulations on your purchase of the Prestige ISDN Router.; Setup Information; ISDN Line; ISDN switch type; Ethernet Setup Information
Prestige 100 and 100IH ISDN Router and Router/Hub xvi Preface Preface About Your Prestige Congratulations on your purchase of the Prestige ISDN Router. The Prestige 100 and 100IH are high-performance routers that offer complete solutions for yourWAN (Wide Area Network) applications such as Internet ...
Page 17 - Structure of this Manual
Prestige 100 and 100IH ISDN Router and Router/Hub Preface xvii Please note that every machine on a network must have a unique IP address - do not assign anarbitrary address to any machine. If you are not sure as to which IP address to assign to thePrestige, contact your Internet Service Provider (IS...
Page 19 - Chapter 1; Features of the Prestige; Extensive Analog Phone Support
Prestige 100 and 100IH ISDN Router and Router/Hub Getting to know your Prestige 1-1 Chapter 1 Getting to Know Your ISDN Router 1.1 Features of the Prestige ISDN Basic Rate Interface (BRI) Support The Prestige supports a single BRI. A BRI offers two 64 Kbps channels, which can be usedindependently fo...
Page 20 - PPP Multilink
Prestige 100 and 100IH ISDN Router and Router/Hub 1-2 Getting to know your Prestige AUI Interface (P100 only) The Prestige 100 has an additional AUI (Attachment Unit Interface) or 10 Base-5 port in additionto a 10 Base-T port. The AUI allows you to connect the Prestige to a thicknet cable. If you ha...
Page 21 - Call Waiting
Prestige 100 and 100IH ISDN Router and Router/Hub Getting to know your Prestige 1-3 Call Control Your Prestige provides budget management for outgoing calls and maintains a blacklist forunreachable phone numbers in order to save you the expense of unnecessary charges. Data Compression Your Prestige ...
Page 22 - Figure 1-1 Internet Access Application; Internet Single User Account
Prestige 100 and 100IH ISDN Router and Router/Hub 1-4 Getting to know your Prestige 1.2 Applications for Prestige 100 and 100IH 1.2.1 Internet Access The Prestige is the ideal high-speed Internet access solution. Your Prestige supports the TCP/IPprotocol, which the Internet uses exclusively. It is a...
Page 24 - Figure 1-3 Telecommuting/Remote Access Server Application
Prestige 100 and 100IH ISDN Router and Router/Hub 1-6 Getting to know your Prestige Figure 1-3 Telecommuting/Remote Access Server Application
Page 25 - Chapter 2; Table 2-1 LED functions
Prestige 100 and 100IH ISDN Router and Router/Hub Hardware Installation and Setup 2-1 Chapter 2 Hardware Installation & Initial Setup 2.1.1 Front Panel LEDS OF P100 The LED indicators on the front panel indicate the operational status of the Prestige 100. Thefollowing table describes the LED fun...
Page 26 - Table 2-2 LED functions; PWR
Prestige 100 and 100IH ISDN Router and Router/Hub 2-2 Hardware Installation and Setup 2.1.2 Front Panel LEDs OF P100IH The LED indicators on the front panel indicate the operational status of the Prestige 100IH. Thefollowing table describes the LED functions: PWR ISDN LAN PHONE TST LNK B1 B2 1 2 3 4...
Page 27 - Prestige 100IH Rear Panel and Connections; Figure 2-3 Prestige 100IH Rear Panel and Connections
Prestige 100 and 100IH ISDN Router and Router/Hub Hardware Installation and Setup 2-3 2.2 Prestige 100IH Rear Panel and Connections The figure below shows the rear panel of your Prestige 100IH and the connection diagram. Figure 2-3 Prestige 100IH Rear Panel and Connections The next figure shows the ...
Page 28 - Figure 2-4 Prestige 100 Rear Panel and Connections
Prestige 100 and 100IH ISDN Router and Router/Hub 2-4 Hardware Installation and Setup Figure 2-4 Prestige 100 Rear Panel and Connections This section outlines how to connect your Prestige 100 and 100IH to the LAN and to the ISDNnetwork.
Page 29 - and the other to the ISDN wall jack.; UTP Interface; or
Prestige 100 and 100IH ISDN Router and Router/Hub Hardware Installation and Setup 2-5 Step 1. Connecting the ISDN Line Connect the Prestige to the ISDN network using the included ISDN (black) cable. Plug one endof the cable into the port labeled ISDN BRI and the other to the ISDN wall jack. Step 2. ...
Page 30 - Chapter 9 - Telnet Configuration and Capabilities; Additional Installation Requirements; VT100 terminal emulation.
Prestige 100 and 100IH ISDN Router and Router/Hub 2-6 Hardware Installation and Setup After the initial setup, you can modify the configuration remotely through telnet connections. See Chapter 9 - Telnet Configuration and Capabilities for detailed instructions on using telnet to configure your Prest...
Page 31 - Power On Your Prestige; Initial Screen; Enter; Entering Password; Figure 2-6 Login Screen
Prestige 100 and 100IH ISDN Router and Router/Hub Hardware Installation and Setup 2-7 2.4 Power On Your Prestige At this point, you should have connected the console port, the ISDN BRI port, the Ethernet portand the power port to the appropriate devices or lines. You can now apply power to the Prest...
Page 32 - Navigating the SMT Interface; Table 2-3 Main Menu Commands; Operation
Prestige 100 and 100IH ISDN Router and Router/Hub 2-8 Hardware Installation and Setup 2.5 Navigating the SMT Interface The SMT (System Management Terminal) is the interface that you use to configure your Prestige. Several operations that you should be familiar with before you attempt to modify theco...
Page 33 - Figure 2-7 SMT Main Menu; System Management Terminal Interface Summary; Table 2-4 Main Menu Summary; Menu Title
Prestige 100 and 100IH ISDN Router and Router/Hub Hardware Installation and Setup 2-9 After you enter the password, the SMT displays the Main Menu, as shown below. Figure 2-7 SMT Main Menu 2.5.1 System Management Terminal Interface Summary Table 2-4 Main Menu Summary # Menu Title Description 1 Gener...
Page 34 - Changing the System Password; Enter your new system password (up to 30 characters), and press
Prestige 100 and 100IH ISDN Router and Router/Hub 2-10 Hardware Installation and Setup 23 System Security Use this menu to setup security related parameters. 24 System Maintenance This menu provides system status, diagnostics, software upload, etc. 99 Exit To exit from SMT and return to the blank sc...
Page 35 - Enter 1 in the Main Menu to open Menu 1 – General Setup.; Figure 2-9 Menu 1 – General Setup
Prestige 100 and 100IH ISDN Router and Router/Hub Hardware Installation and Setup 2-11 2.7 General Setup Menu 1 - General Setup contains administrative and system-related information. To enter Menu 1 and fill in the required information, follow these steps: Step 1. Enter 1 in the Main Menu to open M...
Page 36 - Table 2-5 General Setup Menu Fields
Prestige 100 and 100IH ISDN Router and Router/Hub 2-12 Hardware Installation and Setup Table 2-5 General Setup Menu Fields Field Description Example System Name Choose a descriptive name for identification purposes. This name can beup to 30 alphanumeric characters long. Spaces are not allowed, butda...
Page 37 - Menu 2 for North American switches is displayed below.; Figure 2-10 North American ISDN Setup
Prestige 100 and 100IH ISDN Router and Router/Hub Hardware Installation and Setup 2-13 2.8.1 North American ISDN Setup Menus Menu 2 for North American switches is displayed below. Figure 2-10 North American ISDN Setup Menu 2 - ISDN Setup Switch Type: AT&T 5ESS NI-1 B Channel Usage= Switch/Switch...
Page 38 - Table 2-7 North American ISDN Menu Setup Fields; Supplementary Voice Services
Prestige 100 and 100IH ISDN Router and Router/Hub 2-14 Hardware Installation and Setup Table 2-7 North American ISDN Menu Setup Fields SwitchType If your switch type is not currently shown, press the space bar to change to the nextswitch; repeat until you see the correct switch type. The Prestige wi...
Page 39 - Table 2-8 NI-1 Default Feature Key Settings; Feature; Call Transfer; Yes; None
Prestige 100 and 100IH ISDN Router and Router/Hub Hardware Installation and Setup 2-15 The Advanced Phone Services chapter in this manual describes these services in more detail.There may be an additional charge for each of these services, so just choose the services youneed. The phone company repre...
Page 40 - Switch Type
Prestige 100 and 100IH ISDN Router and Router/Hub 2-16 Hardware Installation and Setup 2.8.2 European (DSS1) & German (1TR6) ISDN Setup Menus Switch Type The only switch types supported in Europe are DSS-1 and 1TR6 (Germany only). MSN and Subaddress Depending on your location, you may have Multi...
Page 41 - Outgoing Calling Party Number; Figure 2-12 Menu 2 – ISDN Setup for DSS1
Prestige 100 and 100IH ISDN Router and Router/Hub Hardware Installation and Setup 2-17 Please note that the PABX prefix is for calls initiated by the Prestige only. If you place a callfrom a device on either A/B adapter, you must dial the prefix by hand. Outgoing Calling Party Number If this field i...
Page 42 - Table 2-10 Menu 2 – ISDN Setup
Prestige 100 and 100IH ISDN Router and Router/Hub 2-18 Hardware Installation and Setup Figure 2-13 Menu 2 – ISDN Setup for 1TR6 Table 2-10 Menu 2 – ISDN Setup Switch Type This field is fixed as DSS1or 1TR6. In general, this is Switch/Switch. If you are only using one B channel(e.g., your Prestige is...
Page 43 - Advanced Setup; ISDN Call Waiting; How to use call waiting; Calling Line Indication; Enable; , the Prestige sends the caller ID and the party you call can see; Disable; Figure 2-14 ISDN Advanced Setup
Prestige 100 and 100IH ISDN Router and Router/Hub Hardware Installation and Setup 2-19 Incoming PhoneNumber Matching Determines how incoming calls are routed. The choices for this fieldare Multiple Subscriber Number (MSN), Called Party Subaddressand Don’t Care. Select Endgeraete Auswahl Ziffer (EAZ)...
Page 44 - When you are finished, press; ENTER; at the message: ‘Press ENTER to confirm’, the Prestige; Figure 2-15 Loopback test
Prestige 100 and 100IH ISDN Router and Router/Hub 2-20 Hardware Installation and Setup When you are finished, press ENTER at the message: ‘Press ENTER to confirm’, the Prestige uses the information that you entered to initialize the ISDN line. It should be noted that wheneverthe switch type is chang...
Page 45 - AUI; Chapter 8- Filter Set Configuration; Protocol Dependent Ethernet Setup
Prestige 100 and 100IH ISDN Router and Router/Hub Hardware Installation and Setup 2-21 2.9.1 General Ethernet Setup This menu allows you to select your Ethernet interface, either 10BaseT or AUI for the Prestige 100 (only 10BaseT for the Prestige 100IH, so this field does not appear) and specify the ...
Page 47 - Chapter 3; Factory Ethernet Defaults
Prestige 100 and 100IH ISDN Router and Router/Hub Internet Access 3-1 Chapter 3 Internet Access This chapter shows you how to configure the LAN as well as the WAN of your Prestige forInternet access. 3.1 Factory Ethernet Defaults The Ethernet parameters of the Prestige are preset in the factory with...
Page 48 - Both
Prestige 100 and 100IH ISDN Router and Router/Hub 3-2 Internet Access are told otherwise. Let’s say you select 192.168.1.0 as the network number; which covers 254individual addresses, from 192.168.1.1 to 192.168.1.254 (zero and 255 are reserved). In otherwords, the first 3 numbers specify the networ...
Page 49 - IP Pool Setup
Prestige 100 and 100IH ISDN Router and Router/Hub Internet Access 3-3 IP Pool Setup The Prestige is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to192.168.1.64 for the client machines. This leaves 31 IP addresses, 192.168.1.2 to 192.168.1.32(excluding the Prestige itself ...
Page 50 - You will now use Menu 3.2 to configure your Prestige for TCP/IP.
Prestige 100 and 100IH ISDN Router and Router/Hub 3-4 Internet Access 3.3 TCP/IP Ethernet Setup and DHCP You will now use Menu 3.2 to configure your Prestige for TCP/IP. To edit Menu 3.2, select the menu option Ethernet Setup in the Main Menu. When Menu 3appears, select the submenu option TCP/IP and...
Page 51 - Table 3-1 DHCP Ethernet Setup Menu Fields; Field
Prestige 100 and 100IH ISDN Router and Router/Hub Internet Access 3-5 Follow the instructions in the following table on how to configure the DHCP fields. Table 3-1 DHCP Ethernet Setup Menu Fields Field Description Example DHCP Setup DHCP= This field enables/disabled the DHCP server. If it is set to ...
Page 52 - Table 3-2 TCP/IP Ethernet Setup Menu Fields
Prestige 100 and 100IH ISDN Router and Router/Hub 3-6 Internet Access Follow the instructions in the following table to configure TCP/IP parameters for the Ethernetport. Table 3-2 TCP/IP Ethernet Setup Menu Fields Field Description Example TCP/IP Setup IP Address Enter the IP address of your Prestig...
Page 53 - Internet Access Configuration; Use the table below to record your Internet Account Information.; Table 3-3 Internet Account Information; Internet Account Information
Prestige 100 and 100IH ISDN Router and Router/Hub Internet Access 3-7 3.4 Internet Access Configuration Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually asimplified setup for one of the remote nodes that you can access in Menu 11. Before youconfigure your ...
Page 54 - From the Main Menu, enter option; Internet Access Setup; to go to Menu 4 - Internet Access; Figure 3-2 Menu 4 – Internet Access Setup
Prestige 100 and 100IH ISDN Router and Router/Hub 3-8 Internet Access From the Main Menu, enter option Internet Access Setup to go to Menu 4 - Internet Access Setup, as displayed below. The following table contains instructions on how to configure yourPrestige for Internet access. Figure 3-2 Menu 4 ...
Page 55 - Table 3-4 Internet Access Setup Menu Fields; Description
Prestige 100 and 100IH ISDN Router and Router/Hub Internet Access 3-9 Table 3-4 Internet Access Setup Menu Fields Field Description ISP’s Name Enter the name of your Internet Service Provider, e.g., myISP.This information is for identification purposes only. ISP IP Addr Enter the IP Address of the r...
Page 56 - Single User Account; Figure 3-3 Single User Account Topology; Prestige; INTERNET
Prestige 100 and 100IH ISDN Router and Router/Hub 3-10 Internet Access 3.5 Single User Account Typically, if there are multiple users on the LAN wanting to concurrently access the Internet,you will have to lease a block of legal, or globally unique, IP addresses from the ISP. The Single User Account...
Page 57 - SUA supports servers to be accessible to the outside world.
Prestige 100 and 100IH ISDN Router and Router/Hub Internet Access 3-11 The IP address for the SUA can be either fixed or dynamically assigned when a call isconnected. In addition, you can designate servers, e.g., a web server and a telnet server, on yourlocal network and make them accessible to the ...
Page 58 - Figure 3-4 Menu 4 – Internet Access Setup for Single User Account; Table 3-5 Single User Account Menu Fields; Select Yes to enable SUA.; SUA
Prestige 100 and 100IH ISDN Router and Router/Hub 3-12 Internet Access 3.5.2 Single User Account Configuration The steps for configuring your Prestige for Single User Account are identical to theconventional Internet access with the exception that you need to fill in two extra fields in Menu4 - Inte...
Page 59 - Configuring Backup ISP Accounts
Prestige 100 and 100IH ISDN Router and Router/Hub Internet Access 3-13 3.6 Configuring Backup ISP Accounts If you have more than one ISP account, you can configure the secondary ISP as a backup. Youcan switch to the backup ISP in the event that the primary ISP is out of service. The SUAfeature can b...
Page 61 - Chapter 4; Chapter 5; Remote Node Setup; To configure a remote node, follow these steps:
Prestige 100 and 100IH ISDN Router and Router/Hub Remote Node Configuration 4-1 Chapter 4 Remote Node Configuration A remote node is required for placing calls to a remote gateway. A remote node represents boththe remote gateway and the network behind it across a WAN connection. Note that when you u...
Page 62 - Figure 4-1 Menu 11 – Remote Node Setup
Prestige 100 and 100IH ISDN Router and Router/Hub 4-2 Remote Node Configuration Figure 4-1 Menu 11 – Remote Node Setup When Submenu 11.1 - Remote Node Profile appears, fill in the fields as described in the tablebelow to define this remote profile. The Remote Node Profile Menu Fields table shows how...
Page 63 - Table 4-1 Remote Node Profile Menu Fields
Prestige 100 and 100IH ISDN Router and Router/Hub Remote Node Configuration 4-3 Table 4-1 Remote Node Profile Menu Fields Field Description Options Rem Node Name This is a required field [?]. Enter a descriptive name forthe remote node, for example, Corp. This field can be up to eight characters. Th...
Page 65 - Leased
Prestige 100 and 100IH ISDN Router and Router/Hub Remote Node Configuration 4-5 Telco Options: Allocated Budget(min) This field sets a ceiling for outgoing call time for thisremote node. The default for this field is 0 for no budgetcontrol. Default = 0 Period (hr) This field sets the time interval t...
Page 66 - Table 4-2 BTR v MTR for BOD
Prestige 100 and 100IH ISDN Router and Router/Hub 4-6 Remote Node Configuration 4.1.3 PPP Multilink The Prestige uses the PPP Multilink Protocol (PPP/MP) to bundle multiple links in a singleconnection to boost the effective throughput between two nodes. Due to the fragmentation/reconstruction overhe...
Page 67 - Transmit or Receive
Prestige 100 and 100IH ISDN Router and Router/Hub Remote Node Configuration 4-7 Addition and subtraction are based on the value set in the BOD Calculation field. If this field isset to Transmit or Receive , then traffic in either direction will be included to determine if a link should be added or d...
Page 68 - Table 4-3 Remote Node PPP Options Menu Fields
Prestige 100 and 100IH ISDN Router and Router/Hub 4-8 Remote Node Configuration Table 4-3 Remote Node PPP Options Menu Fields Field Description Option Standard PPP Encapsulation Select the CISCO PPP only when this remote nodeis a Cisco machine; otherwise, select the StandardPPP. CISCO PPP Compressio...
Page 69 - Use Menu 11.5 – Remote Node Filter; to specify the filter set(s) to apply to the incoming and; Figure 4-4 Menu 11.5 – Remote Node Filter
Prestige 100 and 100IH ISDN Router and Router/Hub Remote Node Configuration 4-9 4.1.6 Remote Node Filter Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote node and the Prestige and to prevent certain packets fromtriggeri...
Page 72 - Follow the procedure below; Press
Prestige 100 and 100IH ISDN Router and Router/Hub 5-2 Remote Node TCP/IP Configuration 5.1.1 Remote Node Setup Follow the procedure below to configure the TCP/IP parameters in Menu 11 - Remote Node Profile. Follow the steps below to edit Menu 11.3 - Remote Node Network Layer Options shown below. Mov...
Page 73 - Table 5-1 TCP/IP related fields in Remote Node Profile; Local Network
Prestige 100 and 100IH ISDN Router and Router/Hub Remote Node TCP/IP Configuration 5-3 The following diagram explains the Sample IP Addresses to help you to understand the field ofMy Wan Addr in Menu 11.3. Figure 5-3 Sample IP Addresses for a TCPI/IP LAN-to-LAN Connection To configure the TCP/IP par...
Page 74 - Table 5-2 TCP/IP Remote Node Configuration
Prestige 100 and 100IH ISDN Router and Router/Hub 5-4 Remote Node TCP/IP Configuration Table 5-2 TCP/IP Remote Node Configuration Rem IP Address This will show the IP address you entered for this remote nodein the previous menu. Rem IP SubnetMask Enter the subnet mask for the remote network. My WAN ...
Page 75 - Figure 5-4 Example of Static Routing Topology; Router2; Router1
Prestige 100 and 100IH ISDN Router and Router/Hub Remote Node TCP/IP Configuration 5-5 5.1.2 Static Route Setup Static routes tell the Prestige routing information that it cannot learn automatically through othermeans. This can arise in cases where RIP is disabled on the LAN or a remote network is b...
Page 76 - Choosing a static route to edit produces the following screen.; Figure 5-6Edit IP Static Route
Prestige 100 and 100IH ISDN Router and Router/Hub 5-6 Remote Node TCP/IP Configuration To configure an IP static route, use Menu 12, Static Route Setup, as displayed below. From Menu 12, select one of the available IP static routes to open Menu 12.1 - IP Static RouteSetup, as shown below. Figure 5-5...
Page 77 - Table 5-3 Edit IP Static Route Menu Fields
Prestige 100 and 100IH ISDN Router and Router/Hub Remote Node TCP/IP Configuration 5-7 The following table describes the fields for Menu 12.1.1 – Edit IP Static Route Setup. Table 5-3 Edit IP Static Route Menu Fields Field Description Route Name Enter a descriptive name for this route. This is for i...
Page 79 - Chapter 6; Remote Nodes
Prestige 100 and 100IH ISDN Router and Router/Hub Dial-In Server Configuration 6-1 Chapter 6 Dial-in Server Configuration You can configure your Prestige to receive calls from remote dial-in users, e.g.,telecommuters, as well as remote nodes. There are several differences between dial-in usersand re...
Page 80 - Remote Access Server; An example of remote access server for telecommuters is shown in .; Figure 6-1 Example of Telecommuting; Telecommuting; Remote User; Corporate LAN; ISDN
Prestige 100 and 100IH ISDN Router and Router/Hub 6-2 Dial-In Server Configuration 6.1 Remote Access Server Telecommuting enables people to work at remote sites and yet still have access to theresources in the business office. Typically, a telecommuter will use a client workstation withTCP/IP and di...
Page 81 - Chapter 4 - Remote Node Configuration; Remote Network
Prestige 100 and 100IH ISDN Router and Router/Hub Dial-In Server Configuration 6-3 6.2 LAN-to-LAN Server Application Your Prestige can also be used as a dial-in server for LAN-to-LAN application to provideaccess for the workstations on a remote network. For your Prestige to be set up as a LAN-to-LAN...
Page 82 - Figure 6-3 Menu 13 – Default Dial-in Setup
Prestige 100 and 100IH ISDN Router and Router/Hub 6-4 Dial-In Server Configuration 6.3 Default Dial-In Setup This section covers the default dial-in parameters. The parameters in Menu 13 affect incomingcalls from both remote dial-in users, and remote nodes until authentication is completed. Onceauth...
Page 85 - to specify the filter set(s) to apply to the incoming
Prestige 100 and 100IH ISDN Router and Router/Hub Dial-In Server Configuration 6-7 IP Count (1,2) In this field, enter the number (1 or 2,) of addresses inthe IP Pool. For example, if the starting address is192.168.135.5 and the count is 2, then the pool will have192.68.135.5 and 192.68.135.6 1, 2 S...
Page 89 - Multiple Servers behind SUA; Follow the steps below to configure a server behind SUA; in the main menu to go to menu 15, Multiple Server Configuration.
Prestige 100 and 100IH ISDN Router and Router/Hub Dial-In Server Configuration 6-11 6.5 Multiple Servers behind SUA If you wish, you can make inside servers for different services, e.g., web or FTP, visible to theoutside users, even though SUA makes your whole inside network appear as a single machi...
Page 90 - Figure 6-7 Multiple Server Configuration; you define all the servers or press; ESC; at any time to cancel.; The most often used port numbers are:
Prestige 100 and 100IH ISDN Router and Router/Hub 6-12 Dial-In Server Configuration Figure 6-7 Multiple Server Configuration 3. Press ENTER at the “Press ENTER to confirm …” prompt to save your configuration after you define all the servers or press ESC at any time to cancel. The most often used por...
Page 91 - Chapter 7; Table 7-1 Supplemental Services by region
Prestige 100 and 100IH ISDN Router and Router/Hub Advanced Phone Services 7-1 Chapter 7 Advanced Phone Services The Prestige 100 and 100IH support a comprehensive set of advanced calling features known asSupplemental Services. European and North American ISDN Supplemental Services may varyand have d...
Page 92 - Table 7-2 Supplemental Services by switch type.; Setting Up Supplemental Phone Service; default; “US” refers to a broad range of switch types supported in the USA.
Prestige 100 and 100IH ISDN Router and Router/Hub 7-2 Advanced Phone Services Table 7-2 Supplemental Services by switch type. Feature: US … DSS-1 1TR6 Call Waiting/Call Hold/CallRetrieve [ [ × Three Way Calling(Conference/Transfer/Drop) [ [ × Call Forwarding [ [ × Reminder Ring [ × × 7.1 Getting Sta...
Page 93 - Dropping current call to switch to incoming/holding call.; Notes: An incoming caller receives a busy signal if; Three Way Calling
Prestige 100 and 100IH ISDN Router and Router/Hub Advanced Phone Services 7-3 7.3 The Flash Key Flashing means to press the hook for a short period of time (a few hundred milliseconds) beforereleasing it. On newer telephones, there should be a “flash” key (button) that generates the signalelectronic...
Page 94 - Dial the third party’s telephone number.; To drop yourself from the conference call:; Transferring an active call to a third party:
Prestige 100 and 100IH ISDN Router and Router/Hub 7-4 Advanced Phone Services 7.5.1 How To Use Three Way Calling If you wish to call someone and conference him/her in with an existing call: ♦ Press the flash key to put the existing call on hold and receive a dial tone. ♦ Dial the third party’s telep...
Page 95 - Table 7-3 Phone Flash Commands; Meaning
Prestige 100 and 100IH ISDN Router and Router/Hub Advanced Phone Services 7-5 7.6.2 To Do A Blind Transfer: ♦ Once you have an active call (Caller A), press the flash key to put the existing call on holdand receive a dial tone. ♦ Dial the third party’s telephone number (Caller B). ♦ Before Caller B ...
Page 97 - Chapter 8
Prestige 100 and 100IH ISDN Router and Router/Hub Filter Configuration 8-1 Chapter 8 Filter Configuration 8.1 About Filtering Your Prestige uses filters to decide whether or not to allow passage of a data packet and/or tomake a call. There are two types of filters: data filters and call filters. Dat...
Page 98 - Figure 8-1 Outgoing Packet Filtering Process; The Filter Structure of the Prestige
Prestige 100 and 100IH ISDN Router and Router/Hub 8-2 Filter Configuration Figure 8-1 Outgoing Packet Filtering Process For incoming packets, your Prestige applies data filters only. Packets are processed dependingupon whether a match is found. The following sections describe how to configure filter...
Page 99 - Configuring a Filter Set; To configure a filter sets, follow the procedure below:; Figure 8-2 Menu 21 - Filter Set Configuration
Prestige 100 and 100IH ISDN Router and Router/Hub Filter Configuration 8-3 8.2 Configuring a Filter Set To configure a filter sets, follow the procedure below: Step 1. Select option 21. Filter Set Configuration from the Main Menu to open Menu 21. Figure 8-2 Menu 21 - Filter Set Configuration Step 2....
Page 100 - Table 8-1 Abbreviations Used in the Filter Rules Summary Menu; Abbreviations
Prestige 100 and 100IH ISDN Router and Router/Hub 8-4 Filter Configuration Figure 8-3 Menu 21.1 - Filter Rules Summary Figure 8-4 Menu 21.2 - Filter Rules Summary 8.2.1 Filter Rules Summary Menu This screen shows the summary of the existing rules in the filter set. The following tables containa brie...
Page 101 - Table 8-3 Abbreviations Used If Filter Type Is IP; Abbreviation
Prestige 100 and 100IH ISDN Router and Router/Hub Filter Configuration 8-5 Table 8-2 Abbreviations Used in the Filter Rules Summary Menu (continued) Abbreviations Description Display Filter Rules The filter rule parameters will bedisplayed here (see below). M Refers to More. [Y] means there are more...
Page 102 - Table 8-4 Abbreviations Used If Filter Type Is GEN
Prestige 100 and 100IH ISDN Router and Router/Hub 8-6 Filter Configuration l If the filter type is GEN (generic), the following abbreviations listed in the following tablewill be used. Table 8-4 Abbreviations Used If Filter Type Is GEN Abbreviation Description Off Offset Len Length Refer to the next...
Page 103 - Configuring a Filter Rule
Prestige 100 and 100IH ISDN Router and Router/Hub Filter Configuration 8-7 8.3 Configuring a Filter Rule To configure a filter rule, enter its number in Menu 21.1 - Filter Rules Summary and press Enterto open Menu 21.1.1 for the rule. There are two types of filter rules: TCP/IP and Generic. Dependin...
Page 108 - Table 8-6 Generic Filter Rule Menu Fields
Prestige 100 and 100IH ISDN Router and Router/Hub 8-12 Filter Configuration The table below describes the fields in the Generic Filter Rule Menu. Table 8-6 Generic Filter Rule Menu Fields Field Description Option Filter # This is the filter set, filter rule co-ordinates, i.e., 2,3 refers to the seco...
Page 109 - Check Next; Applying a Filter and Factory Defaults; Figure 8-7 Filtering Ethernet traffic
Prestige 100 and 100IH ISDN Router and Router/Hub Filter Configuration 8-13 Action NotMatched Select the action for a packet not matching the rule. Check Next Rule Forward Drop Once you have completed filling in Menu 21.1.2 - generic Filter Rule, press [Enter] at the message [PressEnter to Confirm] ...
Page 110 - Figure 8-8 Filtering Remote Node traffic; Use
Prestige 100 and 100IH ISDN Router and Router/Hub 8-14 Filter Configuration 8.4.2 Remote Node Filters Go to Menu 11.5 (shown below) and enter the number(s) of the filter set(s) as appropriate. Youcan cascade up to four filter sets by entering their numbers separated by commas. The factorydefault fil...
Page 111 - Chapter 9; About Telnet Configuration; Figure 9-1 Telnet Configuration on a TCP/IP Network
Prestige 100 and 100IH ISDN Router and Router/Hub Telnet Configuration 9-1 Chapter 9 Telnet Configuration and Capabilities 9.1 About Telnet Configuration Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through theconsole port. Once your Prestige is configured,...
Page 112 - Telnet Capabilities
Prestige 100 and 100IH ISDN Router and Router/Hub 9-2 Telnet Configuration 9.3 Telnet Capabilities 9.3.1 Single Administrator To prevent confusion and discrepancy on the configuration, your Prestige only allows oneadministrator to log in at any time. Your Prestige also gives priority to the console ...
Page 113 - System Maintenance
Prestige 100 and 100IH ISDN Router and Router/Hub System Maintenance 10-1 Chapter 10 System Maintenance This chapter covers the diagnostic tools that help you to maintain your Prestige. These toolsinclude updates on system status, port status, log and trace capabilities and upgrades for thesystem so...
Page 114 - System Status
Prestige 100 and 100IH ISDN Router and Router/Hub 10-2 System Maintenance 10.1 System Status The first selection, System Status, gives you information on the status and statistics of the ports,as shown below. System Status is a tool that can be used to monitor your Prestige. Specifically, itgives yo...
Page 115 - Table 10-1 System Maintenance - Status Menu Fields
Prestige 100 and 100IH ISDN Router and Router/Hub System Maintenance 10-3 Table 10-1 System Maintenance - Status Menu Fields Field Description Chan Shows statistics for B1 and B2 channels respectively. This is theinformation displayed for each channel: Link Shows the name of the remote node or the u...
Page 116 - Figure 10-3 LAN Packet That Triggered Last Call
Prestige 100 and 100IH ISDN Router and Router/Hub 10-4 System Maintenance LAN Packet WhichTriggered Last Call Shows the first 48 octets of the LAN packet that triggered the lastoutgoing call. Figure 10-3 LAN Packet That Triggered Last Call The figure above shows two examples of triggering packets fr...
Page 117 - Figure 10-4 System Maintenance - Information
Prestige 100 and 100IH ISDN Router and Router/Hub System Maintenance 10-5 10.1.1 System Information Figure 10-4 System Maintenance - Information Menu 24.2.1 – System Maintenance - Information Name: Routing: IP RAS S/W Version: V2.20(C.10) | 1/16/99ISDN F/W Version: V 083 Country Code: 238 LAN Ethern...
Page 118 - Table 10-2 Fields in System Maintenance
Prestige 100 and 100IH ISDN Router and Router/Hub 10-6 System Maintenance Table 10-2 Fields in System Maintenance Field Description Name displays the system name of your Prestige. This information can bemodified in Menu 1 - General Setup. Routing refers to the routing protocol used. RAS S/WVersion r...
Page 119 - Console Port Speed
Prestige 100 and 100IH ISDN Router and Router/Hub System Maintenance 10-7 Figure 10-5 Menu 24.2.2 – System Maintenance – Change Console Port Speed 10.2 Log and Trace There are two logging facilities in the Prestige. The first is the error logs and trace records thatare stored locally. The second is ...
Page 120 - Figure 10-6 Examples of Error and Information Messages
Prestige 100 and 100IH ISDN Router and Router/Hub 10-8 System Maintenance Examples of typical error and information messages are presented in the figure below. Figure 10-6 Examples of Error and Information Messages 60 4 PP07 INFO LAN promiscuous mode <0>61 4 PINI ERROR System Ert completed63 e...
Page 121 - Table 10-3 System Maintenance Menu Syslog Parameters; Parameter; Call Information Messages:
Prestige 100 and 100IH ISDN Router and Router/Hub System Maintenance 10-9 10.2.2 Syslog And Accounting The Prestige uses the UNIX syslog facility to log the CDR (Call Detail Record) and systemmessages to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 - SystemMaintenance - Sy...
Page 122 - Error Information Messages:
Prestige 100 and 100IH ISDN Router and Router/Hub 10-10 System Maintenance line 1 channel 1, call 41, C01, Incoming Call, 40001line 1 channel 1, call 41, C01, ANSWER Connected, 49K 40001line 1 channel 1, call 41, C01, Incoming Call, Call Terminated 2. Error Information Messages: line 1, channel 1, c...
Page 123 - Follow the procedure below to get to Diagnostic
Prestige 100 and 100IH ISDN Router and Router/Hub System Maintenance 10-11 10.3 Diagnostic The diagnostic facility allows you to test the different aspects of your Prestige to determine if it isworking properly. Menu 24.4 allows you to choose among various types of diagnostic tests toevaluate your s...
Page 124 - Table 10-4 System Maintenance Menu Diagnostic; Manual
Prestige 100 and 100IH ISDN Router and Router/Hub 10-12 System Maintenance The following table describes the diagnostic tests available in Menu 24.4 for your Prestige and theconnections. Table 10-4 System Maintenance Menu Diagnostic Field Description Hang Up B1 Call This command hangs up the B1 chan...
Page 125 - Figure 10-9 Display for a Successful Manual Call; This figure shows an example where authentication failed.; Figure 10-10 Display for a Failed Authentication
Prestige 100 and 100IH ISDN Router and Router/Hub System Maintenance 10-13 Figure 10-9 Display for a Successful Manual Call This figure shows an example where authentication failed. Figure 10-10 Display for a Failed Authentication Strat dialing for node <1>### Hit any key to continue. ###Diali...
Page 126 - Backup Configuration; telnet
Prestige 100 and 100IH ISDN Router and Router/Hub 10-14 System Maintenance 10.4 Backup Configuration Option 5 from Menu 24 - System Maintenance allows you to backup the current Prestigeconfiguration to your workstation. Backup is highly recommended once your Prestige isfunctioning properly. You must...
Page 127 - Figure 10-12 Boot module commands
Prestige 100 and 100IH ISDN Router and Router/Hub System Maintenance 10-15 Figure 10-11 Menu 24.7 – Software Update 10.6.1 Boot module commands Prestige boot module commands are shown below. For ATBAx, x denotes the number preceedingthe colon to give the console port speed following the colon in the...
Page 128 - Command Interpreter Mode; Call history chronicles preceding incoming and outgoing calls.
Prestige 100 and 100IH ISDN Router and Router/Hub 10-16 System Maintenance 10.7 Command Interpreter Mode This option allows you to enter the command interpreter mode. A list of valid commands can befound by typing [help] at the command prompt. For more detailed information, check the ZyXELWeb site o...
Page 129 - To enter the call control menu, select option; Figure 10-15 Call Control Parameters
Prestige 100 and 100IH ISDN Router and Router/Hub System Maintenance 10-17 To enter the call control menu, select option 9. Call Control in Menu 24 to go to Menu 24.9 - System Maintenance - Call Control, as shown in the table below. Figure 10-14 Menu 24.9 - System Maintenance - Call Control 10.8.1 C...
Page 130 - Table 10-5 Call Control Parameters Fields
Prestige 100 and 100IH ISDN Router and Router/Hub 10-18 System Maintenance Table 10-5 Call Control Parameters Fields Field Description Dialer Timeout:Digital Call (sec) The Prestige will timeout if it can not set up an outgoing digital callwithin the timeout value. The default is 30. Retry Counter H...
Page 132 - Table 10-6 Call History Fields
Prestige 100 and 100IH ISDN Router and Router/Hub 10-20 System Maintenance Figure 10-18 Call History Table 10-6 Call History Fields Field Description Phone Number This is the telephone number of past incoming and outgoing calls. Dir This shows whether the call was incoming or outgoing. Rate This is ...
Page 133 - Troubleshooting; Problems Starting Up the Prestige; Table 11-1 Troubleshooting the Start-Up of your Prestige; Problem
Prestige 100 and 100IH ISDN Router and Router/Hub Troubleshooting 11-1 Chapter 11 Troubleshooting This chapter covers the potential problems you may run into and the possible remedies. Aftereach problem description, some instructions are provided to help you to diagnose and to solve theproblem. 11.1...
Page 134 - Problems With the ISDN Line; Table 11-2 Troubleshooting the ISDN Line
Prestige 100 and 100IH ISDN Router and Router/Hub 11-2 Troubleshooting 11.2 Problems With the ISDN Line Table 11-2 Troubleshooting the ISDN Line Problem Corrective Action Check the error log (in menu 24.3.1), you should see a log entry forthe ISDN initialization failure in the format, ‘ISDN init fai...
Page 135 - Problems with the LAN Interface; Table 11-3 Troubleshooting the LAN Interface; Problems Connecting to a Remote Node or ISP; Table 11-4 Troubleshooting a Connection to a Remote Node or ISP; Problems for Remote User to Dial-in; Table 11-5 Troubleshooting for Remote Users to Dial-in
Prestige 100 and 100IH ISDN Router and Router/Hub Troubleshooting 11-3 11.3 Problems with the LAN Interface Table 11-3 Troubleshooting the LAN Interface Problem Corrective Action Check the Ethernet LEDs on the front panel. The LED should beon for a port that has a station connected. If it is off, ch...
Page 137 - Appendix
Prestige 100 and 100IH ISDN Router and Router/Hub Acronyms and Abbreviations A-1 Appendix Acronyms and Abbreviations AUI Attachment Unit Interface BAP/BACP Bandwidth Allocation Protocol/Bandwidth Allocation Control protocol BOD Bandwidth on Demand CDR Call Detail Record CHAP Challenge Handshake Auth...
Page 139 - Index
Prestige 100 and 100IH ISDN Router and Router/Hub Index B-1 Index 1TR6, 2-12 a/b adapter, 2-14 authentication, 4-4, 4-5, 6-5 backup, 10-14 BACP, 4-6 Bandwidth on Demand. See BOD BAP, 4-6 Base Transmission Rate, 4-6 blacklist, 10-18 BOD, 4-6, 4-7 BTR. See Base Transmission Rate budget, 6-6, 10-19 cal...
Zyxel G-360
Manual
Zyxel 35
Manual
Zyxel PLA4225
Manual
Zyxel G-170S
Manual
Zyxel 128MH
Manual
Zyxel Vantage Access
Manual
Zyxel PLA-4xx
Manual
Zyxel DMA-1000 Series
Manual
Zyxel AG-100
Manual
Zyxel P-872H
Manual
Zyxel P-660RU Series
Manual
Zyxel NSA310
Manual
Zyxel PLA-400 v2
Manual
Zyxel Wireless PCI Adapter
Manual
Zyxel NWD2105
Manual
Zyxel plx111
Manual