Page 2 - SAFETY PRECAUTIONS Usage Precautions; Contents
ZOOM G7.1ut 2 SAFETY PRECAUTIONS In this manual, symbols are used to highlight warnings and cautions for you to read so that accidents can be prevented. The meanings of these symbols are as follows: This symbol indicates explanations about extremely dangerous matters. If users ignore this symbol and...
Page 3 - Features; Thank you for selecting the; Terms Used in This Manual
ZOOM G7.1ut 4 Features Thank you for selecting the ZOOM G7.1ut (simply called the " G7.1ut " in this manual). The G7.1ut is a sophisticated Multi Effect Processor with the following features. ● Latest technology for top performance Excellent sound quality is assured by signal processing feat...
Page 4 - Top panel; Control section; Control section
ZOOM G7.1ut 6 Controls and Functions Top panel Rear panel ■ Control section ■ Tube section ■ Pre-amp section BANK [ W ]/[ Q ] foot switches [FUNCTION] (CH A/B) foot switch Expression pedal Foot switches 1 – 4 INPUT jack POWER switch -10 dBm/+4 dBm switch AC IN connector OUTPUT R jack MIDI OUT connec...
Page 5 - Getting Connected; Refer to the examples shown below when making connections.; Turn power on in the following order:; NOTE
ZOOM G7.1ut 8 AC adapter Expression pedal Guitar Guitar -10 dBm/+4 dBm switch -10 dBm/+4 dBm switch Guitar amplifiers Headphones Rhythm machine MIDI interface Computer MTR When connecting to the power amplifier input on the rear panel of a guitar amplifier, set the switch to "+4 dBm". The G7...
Page 6 - Quick Guide 1; HINT; • You can switch patches within; ÉBpmTp; HINT; Press the foot switch for the module to be switched on and off.; DELAY module; The key light shows which channel is currently selected.; Distortion type
ZOOM G7.1ut 10 Quick Guide 1 (Play Mode/Manual Mode Operation) This section explains various basic steps, allowing you to use the G7.1ut right away. ÉBpmTp BpmTp AmpDrive AmpDrive ™LVL100 LVL100 U 0 U 0 Selecting a patch (play mode) HINT You can switch the group/bank by turning the [TYPE] knob. NOTE...
Page 7 - Quick Guide 2; Press the effect module key for the module to edit.; NEWDrive
ZOOM G7.1ut 12 Quick Guide 2 (Edit Mode/Store Mode Operation) This section explains how to edit a selected patch and how to store the changes you have made. ¡Depth =100 Depth =100 é MOD:Chorus MOD:Chorus ™STORE?åU0-1 é NEWDrive £:PATCH U 0 Editing a patch (edit mode) HINT • The effect type (distorti...
Page 8 - Patch name; Function foot switch assignment; Selecting Patches for Playing; Panel display; Adjusting the sound; FD Clean
ZOOM G7.1ut 14 ÉBpmTp BpmTp é NewDrive NewDrive ™LVL100 LVL100 A 0 A 0 Group name (A, b, U, u) Bank number (0 – 9) Patch name "E" symbol Groups A and b are read-only groups (preset groups). Groups U and u are read/write enabled groups (user groups). If the currently displayed setting value d...
Page 9 - Using the Energizer; é–œ–œμμ
Selecting Patches for Playing (Play Mode) ZOOM G7.1ut 16 [PRESENCE] knob [LEVEL] knob [BASS] knob [MIDDLE] knob [TREBLE] knob [GAIN] knob Distortion intensity Pre-amp module output level Low range boost/cut Mid range boost/cut High range boost/cut Ultra-high range boost/cut • The lit [STORE/SWAP] ke...
Page 10 - Patch level; Switching Modules On and Off With Your Foot During Play; Press and hold the BANK [; ] foot switch lights up
ZOOM G7.1ut 18 ÉBpmTp BpmTp é NewDrive NewDrive ™LVL100 LVL100 "E" symbol If the currently displayed setting value differs from the original patch setting, the indication "E" (for "Edited") appears. BANK [ W ] foot switch LED This is always lit when the G7.1ut is in manual mo...
Page 11 - Using the Internal Tuner; Using the chromatic tuner; To switch to the bypass condition; ] foot switch for about 1; To switch to the mute condition; H o l d t h e B A N K [; Play the open string to tune.
ZOOM G7.1ut 20 Using the Internal Tuner (Bypass/Mute Condition) The G7.1ut incorporates a tuner function that supports regular chromatic tuning as well as special tuning.This section explains the steps for using the tuner. Using the chromatic tuner To use the chromatic tuner function, proceed asfoll...
Page 12 - Tuner type; Using other tuner types; Tune other strings in the same way.; TMOPEN A; D B; TMGUITAR; Changing the Sound of a Patch; Patch configuration; Select the patch to edit.
Using the Internal Tuner (Bypass/Mute Condition) ZOOM G7.1ut 22 STR1 STR2 STR3 STR4 STR5 STR6 STR7 GUITAR BASS OPEN A OPEN G OPEN E OPEN D DADGAD G D A E B E B G D A E B E DB A E A E D A GB D A D E B AB E B E D B G D G D D A G D A D Tuner type String number Using other tuner types B e s i d e s c h ...
Page 13 - Effect module keys; Figure 1
Changing the Sound of a Patch (Edit Mode) ZOOM G7.1ut 24 [COMP] key [EQ] key [MOD/EFX2] key [REVERB] key [WAH/EFX1] key [PRE-AMP] key [CABINET] key [DELAY] key [TOTAL/FUNCTION] key [ZNR] key Effect module keys • The effect module keys for modules that are ON in the currently selected patch are lit i...
Page 14 - Changing a patch name; çå; Storing Patches and Banks; Storing/swapping patches
Changing the Sound of a Patch (Edit Mode) ZOOM G7.1ut 26 5. Repeat steps 2 – 4 to edit other modules in the same way. 6. When editing is finished, press the [EXIT] key. The G7.1ut returns to the previous mode. NOTE • The changes that you have made to a patch will be lost when you select another patc...
Page 15 - Storing/swapping banks; U1 é
Storing Patches and Banks (Store Mode) ZOOM G7.1ut 28 5. Use parameter knob 1 or the foot switches 1 – 4 to select the store/swap target patch number. 6. Press the [STORE/SWAP] key once more. The store/swap process is carried out, and theG7.1ut then returns to the play mode or manualm o d e w i t h ...
Page 16 - The display changes as follows.; The display changes as follows.
ZOOM G7.1ut 30 Using the Expression Pedal This section explains how to use the built-in and an external expression pedal. About the built-in expression pedal The G7.1ut has an integrated expression pedalt h a t c a n b e u s e d t o c o n t r o l s p e c i f i c e f f e c tparameters in real time. T...
Page 17 - PDL Calibration; The volume level changes.
Using the Expression Pedal ZOOM G7.1ut 32 NOTE It is also possible to specify the same parameterf o r m o r e t h a n o n e c o n t r o l t a r g e t , b u t i n s o m ecases, extreme parameter value changes may leadto noise. This is not a defect. 8. When all settings for the built-in expression ped...
Page 18 - The unit returns to play mode.
ZOOM G7.1ut 34 Using the Function Foot Switch The G7.1ut provides a programmable [FUNCTION] (CH A/B) foot switch on the top panel. You can selectone from a range of functions, assign it to the switch, and store the setting for each patch individually. 1. In play mode, select the patch. HINT The [FUN...
Page 19 - MIDI Usage Examples; This section describes the various MIDI functions of the G7.1ut.; What you can do with MIDI; ¡FRONT
Using the Function Foot Switch ZOOM G7.1ut 36 4. To synchronize a parameter to the specified tempo, select the effect type and effect parameter to synchronize, and select the note symbol as the setting value for the parameter. The setting value for effect parameters whichsupport tempo synchronizatio...
Page 20 - Direct mode; Mapping mode; Enable program change send/; Using direct mode
MIDI Usage Examples ZOOM G7.1ut 38 5. Turn parameter knob 1 to select the MIDI channel (1 – 16) on which the G7.1ut will send MIDI messages. 6. When the setting is complete, press the [EXIT] key to exit the AMP SELECT/SYSTEM menu. The indication “Store...?” appears on the display,to allow you to sto...
Page 21 - Using mapping mode; program change numbers.
MIDI Usage Examples ZOOM G7.1ut 40 SELECT/SYSTEM menu. If any setting on the AMP SELECT/SYSTEMmenu has been changed, the indication “Store...?”appears on the display, to allow you to store thechanges. 5. Press the [STORE/SWAP] key to save the changes. The setting is accepted, and the unit returns to...
Page 22 - Enable control change send/
MIDI Usage Examples ZOOM G7.1ut 42 ■ Enable control change send/ receive T h e p r o c e d u r e f o r e n a b l i n g s e n d / r e c e i v e o fcontrol change messages is described below. 1. In play mode, press the [AMP SELECT/SYSTEM] key. 2. To enable the G7.1ut to receive control change messages...
Page 23 - Example for receiving control
MIDI Usage Examples ZOOM G7.1ut 44 ● When module on/off switching is performed When the module is set to on, the value 127 ofthe control change number is sent. When themodule is set to off, the value 0 of the controlchange number is sent. ● When bypass/mute on/off switching is performed When bypass/...
Page 24 - Using the ARRM function; Wah Wah; x2
ZOOM G7.1ut 46 Other Functions Using the ARRM function The G7.1ut incorporates an innovative featurec a l l e d A R R M ( A u t o - R e p e a t R e a l - t i m eM o d u l a t i o n ) w h i c h u s e s v a r i o u s i n t e r n a l l ygenerated control waveforms to cyclically modifyeffect parameters....
Page 25 - Compatible operating system; USB Only
Other Functions ZOOM G7.1ut 48 Fig. 1: Signal flow during recording Fig. 2: Signal flow during playback (1) Fig. 3: Signal flow during playback (2) [USB] [USB] [INPUT] USB USB DAW software DAW software DAW software Effects G7.1ut G7.1ut [INPUT] [OUTPUT] [OUTPUT] Effects [USB] USB G7.1ut [INPUT] [OUT...
Page 26 - Web site of ZOOM CORPORATION; Linking Effects; When CABINET module is off; The live performance algorithm is selected for; When CABINET module is on; EQ
Other Functions ZOOM G7.1ut 50 About the editor/librarian software Z O O M C O R P O R A T I O N m a k e s a n e d i t o r /l i b r a r i a n s o f t w a r e a p p l i c a t i o n a v a i l a b l e f o rdownload on its web site. To use the software, the computer must have aM I D I i n t e r f a c e ...
Page 27 - FRONT; Changing the insert position of
Linking Effects ZOOM G7.1ut 52 Using the Amp Select Function The G7.1ut incorporates an Amp Select functionthat optimizes the frequency response to match athe type of amplifier in use. When starting to usethe G7.1ut or when changing the guitar amp, youshould choose a suitable Amp Select setting asde...
Page 28 - Effect parameters 1 – 4; Effect module; Effect Types and Parameters; COMP module; Compressor; RackComp; Limiter; Booster
ZOOM G7.1ut 54 This effect simulates a tape echo. The above two effect types have the same parameters. PARM1 PARM2 PARM3 PARM4 Time 1 – 2000 mS FeedBack 0 – 100 HiDamp 0 – 10 Mix 0 – 100 Sets the delay time. Adjusts the amount of feedback. Higher setting values result in a higher number of delay sou...
Page 29 - ZNR module
Effect Types and Parameters ZOOM G7.1ut 56 Tremolo This effect periodically varies the volume level. PARM1 PARM2 PARM3 PARM4 Depth 0 – 100 Rate 0 – 50 Wave UP 0 – 9, DWN 0 – 9, TRI 0 – 9 Level 2 – 100 Adjusts the modulation depth. Adjusts the modulation rate. Controls the modulation waveform. Availa...
Page 30 - PRE AMP module; EQ module
Effect Types and Parameters ZOOM G7.1ut 58 PRE AMP module This module comprises 35 types of distortion and an acoustic simulator. In edit mode, the module is adjusted using the [GAIN] and [LEVEL] knobs of the pre-amp section and the parameter knobs 1 and 2. For each effect type in this module, there...
Page 31 - CABINET module
Effect Types and Parameters ZOOM G7.1ut 60 CABINET module This effect simulates the sound obtained when recording an amp cabinet with a microphone. The simulated mic type and position can be selected. The on/off status of this module controls the automatic algorithm selection in the PRE-AMP module (...
Page 33 - REVERB module
Effect Types and Parameters ZOOM G7.1ut 64 Comb Filter This effect uses the comb filter characteristics generated by using fixed modulation on the flanger as an equalizer. PARM1 PARM2 PARM3 PARM4 Frequency 1 – 50 Resonance -10 – 10 HiDamp 0 – 10 Mix 0 – 100 Adjusts the frequency to be emphasized. Ad...
Page 34 - Ping Pong Dly; Auto Pan; TOTAL module; TOTAL; NAME
Effect Types and Parameters ZOOM G7.1ut 66 Ping Pong Dly This is a ping-pong delay with a delay time of up to 3000 ms. PARM1 PARM2 PARM3 PARM4 Time 1 – 3000 FeedBack 0 – 100 Hi Damp 0 – 10 Mix 0 – 100 Sets the delay time. Adjusts the feedback amount. Adjusts the treble attenuation of the effect soun...
Page 36 - MIDI implementation chart; GROUP BANK
Specifications ZOOM G7.1ut 70 MIDI implementation chart [EFFECTOR ] Date : 08.Oct.,2005 Model G7.1ut MIDI Implementation Chart Version :1.00+---------------------+--------------------+--------------------+---------------------+| | Transmitted | Recognized | Remarks || Function ... | | | |+----------...
Page 38 - MESA/BOOGIE Dual Rectifier; G7.1ut Modeling Description; 5 AMP/STOMP BOX MODELS; Reference for drive effect types and its original models.
The long history of the VOX company harks back to the foundation of “Jennings Musical Instruments” (JMI) in 1958. Originally, this company made amplifiers with 10-15w output power but the musical trend required more powerful amplification, which resulted in the birth of the revered “AC30” guitar amp...
Page 40 - USB/Cubase LE Startup Guide; Connect this unit to the computer using a USB cable.; Cubase LE Installation; Windows XP; Connections and Preparations; Connections and Preparations
To connect this unit to a computer running Windows XP and to enable audio input/output, proceed as follows. Install Cubase LE on the computer. When you insert the CD-ROM supplied with this product into the CD-ROM drive of the computer, the installer will start up automatically.Follow the on-screen i...
Page 41 - A new audio track is added to the project window.; Make the following settings for the new audio track.; You can perform the following steps here.; Verify that the transport panel is shown.; To play the recording, perform the following steps.; For optimum enjoyment; In particular, check for resident software and utilities.; Continued from front
Access the "File" menu and select "New Project". The new project window appears. Here you can select a projecttemplate. Make sure that the "Empty" template is selected, and click the OK button. A window for selecting the project file save location appears. After specifying th...
ZOOM 1598
Manual
ZOOM 5565
Manual
ZOOM 4386/TF
Manual
ZOOM 1640A
Manual
ZOOM 1550
Manual
ZOOM 5654A
Manual
ZOOM G1N
Manual
ZOOM 300
Manual
ZOOM IG 4165
Manual
ZOOM 4410A
Manual
ZOOM MRS-1266
Manual
ZOOM 4310B
Manual
ZOOM 4420-A
Manual
ZOOM Zoom V3
Manual
ZOOM 504 II
Manual
ZOOM FIRE-18
Manual
ZOOM 4117
Manual
ZOOM 4414F
Manual