ZOOM G2 - Manuals

ZOOM G2 – Manual in PDF format online.

Manuals:

Manual

Manual ZOOM G2

Summary

Page 2 - SAFETY PRECAUTIONS; SAFETY PRECAUTIONS Usage Precautions; ZOOM G2; Contents

ZOOM G2 2 SAFETY PRECAUTIONS In this manual, symbols are used to highlight warnings and cautions for you to read so that accidents can be prevented. The meanings of these symbols are as follows: This symbol indicates explanations about extremely dangerous matters. If users ignore this symbol and han...

Page 3 - Features; Operating the G2 on batteries; Terms Used in This Manual

ZOOM G2 4 Features Thank you for selecting the ZOOM G2 (hereafter simply called the "G2"). The G2 is a multi effectprocessor with the following features and functions. ● Latest processing technology for outstanding performance 96 kHz / 24 bit sampling (with 32 bit internal processing) assure...

Page 4 - Module selector; Top Panel; Serves for storing edited patches in memory.; Parameter knobs 1 - 3; Turns the unit on and off.

ZOOM G2 6 Controls and Functions / Connections Module selector Top Panel Rear Panel Switches between play mode and edit mode. In edit mode, the knob selects the module for operation. [ W ]/[ Q ] foot switches These switches are used for selecting patches, switching effect modules on and off, control...

Page 5 - HINT; Turn power on; ] foot switch calls up the next lower patch, and pressing the [; Bank name Patch number; Adjust tone and volume; NOTE; Parameter knob 2; Directly selecting a bank

ZOOM G2 8 Selecting a Patch A 1 HINT Turn power on Set the G2 to play mode Use a monaural shielded cable to connect the guitar to the [INPUT] jack of the G2. When using the G2 with the AC adapter, plug the adapter into the outlet and plug the cable from the adapter into the [DC IN] jack on the G2. T...

Page 6 - Switch to bypass or mute; Setting the G2 to the bypass state; switches together briefly and release.; Setting the G2 to the mute state; Play the string to tune; Patch change at bypass/mute; Pitch is high; Adjusting the reference pitch of the tuner; Turn Parameter knob 1.

ZOOM G2 10 Using the Tuner A 8 B P M T Switch to bypass or mute Setting the G2 to the bypass state In play mode, press both [ W ]/[ Q ] foot switches together briefly and release. Setting the G2 to the mute state In play mode, press both [ W ]/[ Q ] foot switches together and hold for at least 1 sec...

Page 7 - Dot is shown; To adjust the rhythm volume, turn Parameter knob 3.; The G2 returns to the previous condition.

ZOOM G2 12 Set the G2 to play mode If the Module selector is set to a position other than "PLAY", set it to "PLAY". Start the rhythm function Select a rhythm pattern To start the rhythm function, press the RHYTHM [ R / P ] key. To continuously switch rhythm patterns, turn Parameter k...

Page 8 - Select the effect module; Effect type; B L; Terminate the edit mode

ZOOM G2 14 Editing a Patch The patches of the G2 can be freely edited by changing the effect parameter settings. Try editing thecurrently selected patch to create your own sound. F C O F Select the effect module Turn the Module selector to select the effect module to edit. The following settings are...

Page 9 - To cancel the store process

ZOOM G2 16 Storing/Copying Patches An edited patch can be stored in a bank of the user area (A – d). It is also possible to store an existing patchin another location to create a copy. A 0 D 0 In play mode or edit mode, press the [STORE] key. The bank and patch number are shown on the display as a f...

Page 10 - oF

ZOOM G2 18 Foot switch pressed Pressed again Original sound Delay sound Hold Using an Optional Foot Switch or Pedal The G2 is equipped with a [CONTROL IN] jack designed for connection of an optional foot switch orexpression pedal. This section explains how to use these accessories. Using the foot sw...

Page 11 - Restoring Factory Defaults; A L; EXTRA EQ; Algorithm for; Linking Effects; EXTRA EQ is selected

ZOOM G2 20 Restoring Factory Defaults In the factory default condition, the patches of the user area (A0 – d9) contain the same settings as thepatches of the preset area (00 – 39). Even after overwriting the user patches, their original content can berestored in a single operation ("All Initiali...

Page 12 - TAP; How to read the parameter table; COMP

ZOOM G2 22 Effect Types and Parameters DELAY DELAY module This is a delay module which allows long delay times and use of the hold function. dL DELAY This is a delay with a maximum setting of 5000 ms. Pd PINGPONG DELAY This is a ping-pong type delay where the delay sound alternates between left and ...

Page 13 - ZNR; DRIVE module

Effect Types and Parameters ZOOM G2 24 rG RING MODULATOR This effect produces a metallic ringing sound. Adjusting the FREQUENCY parameter results in a drastic change of sound character. POSITION bF, AF FREQUENCY 1 – 50 MIX 0 – 98, 1.0 Selects the connection position of the WAH/EFX module. Available ...

Page 14 - EQ

Effect Types and Parameters ZOOM G2 26 EQ EQ (Equalizer) module Allows adjusting the three main bands (BASS, MIDDLE, TREBLE) of the six-band equalizer. BASS ±12 160Hz MIDDLE ±12 800Hz TREBLE ±12 3.2kHz Adjusts the low frequency range level. Adjusts the mid frequency range level. Adjusts the high fre...

Page 15 - REVERB; REVERB module

Effect Types and Parameters ZOOM G2 28 tE TAPE ECHO This effect simulates a tape echo. TIME 1 – 99, 1.0 – 2.0 FEEDBACK 0 – 98, 1.0 MIX 0 – 98, 1.0 Adjusts the delay time. In the range from 10 – 990 ms, the adjustment is made in 10-ms steps (1 – 99). For 1 second and above, the adjustment is made in ...

Page 16 - CONTROL; CONTROL module; Specifications; Troubleshooting

Effect Types and Parameters ZOOM G2 30 "UP" Maximum value Minimum value Maximum value Maximum value Value set in patch Value set in patch Minimum value Minimum value "DOWN" "HIGH" "LOW" CONTROL CONTROL module Serves for making pedal settings and lets you control the f...

Page 17 - PatternName

ZOOM CORPORATION ITOHPIA Iwamotocho 2chome Bldg. 2F, 2-11-2, Iwamoto-cho,Chiyoda-ku, Tokyo 101-0032, JapanWeb Site: http://www.zoom.co.jp G2 - 5000-2 G2 Preset Pattern # PatternName TimSig # PatternName TimSig 1 8beat_1 4/4 21 POP_3 4/4 2 8beat_2 4/4 22 DANCE_1 4/4 3 8beat_3 4/4 23 DANCE_2 4/4 4 8sh...

Page 18 - Introduction for newly developed effects; Fender TWIN Reverb; Setting recommendation on popular guitar amps; G2 Patch List

6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 Early Reflection Early Reflection is the component of the reverb sound that reaches to the listener first after the original sound h...

Page 19 - MESA/BOOGIE Dual Rectifier; bC; Modeling Description; ... Reference for drive effect types and its original models.

The long history of the VOX company harks back to the foundation of “Jennings Musical Instruments” (JMI) in 1958. Originally, this company made amplifiers with 10-15w output power but the musical trend required more powerful amplification, which resulted in the birth of the revered “AC30” guitar amp...