ZOOM Dialer 26 - Manuals - manualsarea.com

Page 2 - Contents

Contents GETTING STARTED .......................................................... 3 H OW THE D IALER W ORKS ........................................................ 3 INSTALLING THE DIALER ................................................ 4 SETTING UP THE DIALER........................................

Page 3 - Getting Started; How the Dialer Works

Getting Started 3 Getting Started Thank you for purchasing our dialer. Before you begininstalling it, you should read the section below. How the Dialer Works The dialer simplifies using calling cards by dialing all the extra numbers automatically. When you first install thedialer, or when you get a ...

Page 4 - Installing the Dialer

4 Dialer Installation & User’s Guide Installing the Dialer First, find a suitable location for the dialer. This locationneeds two things: • A standard phone jack connected to the phone lineyou want to use for your dialer. It’s okay if there’s something plugged into that jack, since the dialer ha...

Page 6 - Setting Up the Dialer; LearnMode

6 Dialer Installation & User’s Guide Setting Up the Dialer If you want to share your dialer among people who will use different calling cards, please read the section Advanced LearnMode (page 8) for instructions on how to set up dialer keys. Otherwise please read aboutLearnMode below. LearnMode ...

Page 8 - Advanced LearnMode: Adding Keys

8 Dialer Installation & User’s Guide Advanced LearnMode: Adding Keys You can define privacy keys in Advanced LearnMode. Keys configure the dialer so that only people who know the keyscan use the dialer. Roommates with different calling cardscan share a single dialer if each roommate has his or h...

Page 11 - Settings

Settings 11 Settings In this section we tell you how to go into and use AutoRoute Mode, and how to vary the loudness or length of the DTMF tones generated by your dialer. If you don’tcare about these things, please go to Using Your Dialer on page 15. In AutoRoute Mode, the dialer routes calls withou...

Page 12 - Routing Commands

12 Dialer Installation & User’s Guide Example: If your local area code is 555, take your phoneoff-hook and enter #94 555 ##. After getting this command, the dialer will no longer auto- route calls within your local calling area. (Note: your localcalling area may include from one to about ten are...

Page 14 - Dialer Tone Settings

14 Dialer Installation & User’s Guide Dialer Tone Settings The dialer dials by generating DTMF tones. You can adjust the DTMF tone volume and tone length to please you.However, if you make the tones too short or soft, they maynot be consistently and reliably detected during dialing. Often you ca...

Page 28 - Command Summary; Dialer Learns a Calling Card using; Select Dialing Mode; Make a North American Call

28 Dialer Installation & User’s Guide Command Summary All commands begin right after you take your phone off-hook. Dialer Learns a Calling Card using LearnMode Dialer learns calling card for North American calls: #1 <Call a North American number using calling card> Dialer learns calling ca...

Page 29 - Change Dialing Speed; Change Dialing Volume

Command Summary 29 AutoRoute Mode: < Dial 011 plus international number> Route with 2-digit key <XY>: *# <XY> < Dial 011 plus international number> Redial any Call: ## Change Dialing Speed Very Fast Tones (50msec): #* 41 ## Fast Tones (70msec): #* 42 ## Standard Tones (100mse...

Page 30 - Dialer LED Definitions

30 Dialer Installation & User’s Guide Dialer LED Definitions The dialer’s LED can give you useful information about the dialer and the line it’s connected to. Here is a table that shows the LED’s blinking patterns and what theymean. LED Pattern Meaning ON ☼ When the LED is ON solidly, it indicat...