ZLINE Kitchen and Bath DW-BM-18 - Manuals

3 Prior to removal of original dishwasher and the installation of your new unit, make sure to switch off your circuit breaker. Do not connect the dishwasher until you have completed the installation. Connecting the power cable is the last step when installing the dishwasher.All wiring and grounding ...

4 Electric Shock Hazard Failure to follow these instructions can result in death, fire, or electric shock:Electrically ground the dishwasher. Connect the ground wire to the green ground connector in the junction box. Do not use an extension cord. To reduce the risk of electric shock, fire, or injury...

5 Product Dimensions The water supply line, power cable, and drain hose should go through the space behind the dishwasher. The power cable runs in channels under the dishwasher to connections in the front. Enclosure Dimensions This dishwasher is designed to be enclosed on the top and on both sides b...

6 Be sure that you or your installer follow these instructions closely so that the new dishwasher works properly and that you’re not at risk of injury when washing dishes. Step 1: Check the Parts and Tools Before starting on the installation, prepare all the necessary tools and parts required to ins...

9 If the dishwasher is a new installation, most of the installation work must be done before the dishwasher is moved into place. If the dishwasher is replacing an old dishwasher, you must check the existing dishwasher connections for compatibility with the new dishwasher. Replace the existing connec...

10 Step 3: Check Water Supply Requirements and Cautions The hot water supply line pressure must be between 0.04-1MPa.Adjust the water heater to deliver water between 120°F ~149°F. The dishwasher must be connected to a hot water supply between 120°F~149 °F. This temperature range provides the best wa...

12 Step 5: Unpacking and Inspecting the Dishwasher Unbox the dishwasher in an open area free of obstruction both around the carton and overhead. We recommend that you retain the carton and all of the packing materials until the dishwasher is fully installed and operational to ensure you have removed...

13 Step 5: Unpacking and Inspecting the Dishwasher Continued Plumbing Inspection 1. Check the hot water connection on the front left side of the base of the dishwasher. The mounting plate should be secured to the front of the base, the threads inside the connection should be smooth and shiny, and th...

14 Step 6: Preparing the Dishwasher Ensure that the circuit breaker and water supply valve are turned off before proceeding with the following steps. Before you move or lay down the dishwasher for installation, make sure to adjust the height of the legs so the legs are as short as possible. This pre...

16 Step 8: Leveling the Dishwasher 1. Open the door and place the level against the top of the tub on the inside and check if the dishwasher is level. If it is not level, rotate the leveling legs at the at the bottom front of the dishwasher until the dishwasher is level. See the first note below for...

17 Step 9: Securing the Dishwasher You must fix the dishwasher to the countertop or cabinet side walls for additional stability. If the countertop is made of wood or the material will not be damaged by drilling, follow the instructions in 1 below.If the countertop is made of granite, marble, or any ...

18 Step 9: Securing the Dishwasher Continued The screws or tub spacer cap may fall into the dishwasher while you are working with the door open. Cover the interior of the dishwasher with a towel to prevent any screws from falling into the dishwasher. If any foreign items such as a screw get into the...

19 Step 10: Connecting the Drain Hose 1. Check the parts on the sink to which the drain hose will be connected. 2. There are several ways to insert the drain hose into the drain hose connector of the sink, as shown in the following figure. You must connect the drain hose in accordance with the water...

20 Step 10: Connecting the Drain Hose Continued To prevent leaks or drainage problems, make sure the drain hose is not damaged, kinked, or twisted.8. Do not cut the wrinkled area of the drain hose to fit the size. When arranging the drain hose, take caution to avoid contact with sharp edges of the c...

21 Step 11: Wiring Connections 1. Before connecting the power cable to the dishwasher, make sure the circuit breaker is completely turned off.2. In the junction box located at the front bottom right of the dishwasher, find the three power wires from the dishwasher including the grounding line.3. Pas...

22 Step 12: Completing the Installation 1. Open the door and remove all foam, paper packaging, and unnecessary parts.2. Turn on the circuit breaker you turned off before you began the installation.3. Open the water supply valve to supply water to the dishwasher.4. Turn on the dishwasher, and then se...

23 Step 12: Completing the Installation Continued 6. Install the decoration door to the outer door of the dishwasher. Install the hook and brackets on the decoration door, see figure 17. Put the hook into the slot of the outer door, see figure 18. Fix the decoration door onto the outer door with the...

24 Specifications are subject to change without any notice for quality improvement purposes. The actual appearance of the dishwasher may differ from the illustrations in this manual. Specifications for Model DW7714-18 Specifications for Model DW7713-24 Specifications Power Supply 120 Volts, 60 Hz Wa...

26 Proper Installation Please install your dishwasher properly by following the installation guide. Water supply inlet temperature should be between 120° and 149°.Dispose of the discarded appliance and packing material properly.The dishwasher must be properly grounded, or it can result in a risk of ...

27 Basic Precaution Before Use Continued Do not let children abuse, sit, or stand on door or racks of the dishwasher.Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not b...

28 Specifications for Model DW7714-18 Features of your New Dishwasher 1 2 3 4 56 7 8 9 1 Lock 6 Lower Spray Arm 2 Upper Basket 7 Rinse Aid Dispenser 3 Upper Spray Arm 8 Cup Shelf 4 Cutlery Basket 9 Heating Element 5 Lower Basket Capacity 8 place settings Dimensions 17.6" x 22.6" x 32.4" ...

30 Features of your New Dishwasher Filter System Your dishwasher has a multiple filter system. In the system, there are three mesh filters. It can separate soiled water and clean water in different chambers. The multiple filter system helps your dishwasher to get better performance with less water a...

32 Operating Instructions Control Panel 1. Start/Cancel Open the door to select the desired cycle and options, touch the Start/ Cancel button and close the door within 4 seconds to start the cycle or begin the delay countdown. To cancel and reset the program during the cycle, open the door, and touc...

34 E - Energy Save When the energy save function is selected, energy consumption will be reduced during the washing process. Status Window H:01- H:24 If the delay start option is selected, the number of delay start hours shows in the status window. 2:25 - 0:00 After the machine starts operation, the...

35 Cycle Chart Program Heavy Normal ECO Glass Rapid Rinse Description of Cycle Water (L or G) Cycle Time (min) Pre WashMain Wash (140°F)Rinse (149°F)Rinse with Sanitize (156.2°F)DryingPre WashMain Wash (122-131°F)Rinse (136.4-140°F)Rinse with Sanitize (156.2°F)Drying Pre WashMain Wash (113-122°F)Rin...

36 Preparing and Loading Dishes Dish Preparation Scrape away large pieces of food, bones, pits, toothpicks, etc. The continuously filtered wash system will remove the remaining food particles. Burned-on foods should be loosened before loading. Empty liquids from glasses and cups. Foods such as musta...

38 Preparing and Loading Dishes Loading the Silverware Basket The silverware basket can be divided into three separate modules that can be used in both upper and lower racks.1. Spoons 4. Forks 2. Knives 5. Large Spoons 3. Salad Forks 6. Large Forks Adding a Dish To add or remove items after wash cyc...

40 User Maintenance Keeping your dishwasher clean improves its performance, reduces unnecessary repairs, and lengthens it’s life. Cleaning the Exterior It’s best to clean spills on the outside of your dishwasher as they occur. Use a soft, damp cloth on the control panel to gently wipe away spills an...

41 Troubleshooting Problem Rinse Aid light on Dishwasher won't start Dishwasher operates too long Dishes are not clean enough Dishes are not drying Spots and film on dishes Etching Power supply or power line is not connectedDelay start option has been selectedChild lock activated (selected models) R...

43 If overflow occurs, turn off the main water supply before calling a service. If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher. Troubleshooting WARNING during the water inlet step, if the flow meter can't detect th...

Kitchen and Bath Three Locations: 350 Parr Circle Reno, NV 89512 916 Delaware Avenue Marysville, OH 43040 319 Rowland Mill Road Bruceton, TN 38317 www.zlinekitchen.com 1-614-777-5004