Zenith 30609 - Manuals

Zenith 30609 – Manual in PDF format online.

Manuals:

Manual

Manual Zenith 30609

Summary

Page 2 - Contents; Pull-out Font Template

Page 2 of 20 Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Contents Read These Warnings First . . . . . . . . . . . . . . . . . . . . . . . . . .3 Models covered by these instructions . . . . . . . . . . . . . . . . . .4 Installation Requirements . . . . . . . . . ...

Page 3 - Read These Warnings First

Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Page 3 of 20 Read These Warnings First Safety Do not allow young children, handicapped or infirm persons, to use the ZenithHydroTap without supervision. Refrigerant The Zenith HydroTap Chilling unit contains 134A refrig...

Page 4 - Models covered by these instructions; BC; Section Heading

Page 4 of 20 Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 These Installation Instructions cover the entire Zenith HydroTap range. Use thechart on the left to identify the model you are using: Commercial and Domestic Models: BC = Boiling and Chilled, Filtered, Time...

Page 5 - Special tools required; NOTE 1: The tap assembly must not be positioned more than 1m above; Installation procedure

Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Page 5 of 20 In addition to normal tools, the following will be required: • 38mm diameter sheet metal hole punch for sink tops. (not supplied) • 38mm diameter hole saw for timber bench tops. (not supplied) • Nut runner ...

Page 6 - This instruction is critical!

Page 6 of 20 Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Installation procedure continued Vent line Chilled line Hot line Front Vent Hot Outlet Step B - Installing the undersink unit (all models)SPECIAL NOTE: The HydroTap undersink units are heavy, take note of t...

Page 7 - Boiling

Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Page 7 of 20 Step D - Connecting the water supply (all models) To prevent sediment from entering the Zenith HydroTap at connection, flush waterthrough the supply line thoroughly before connection to the Zenith HydroTap....

Page 8 - Font installation procedure

Page 8 0f 20 Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 LARGE HOLE 1. Position the Font template (provided) on the bench area. Ensure the position you select is within the length of the supply tube and USB cablefixed to the Tap Head Assembly. These cannot be ext...

Page 9 - Operating the Tap

Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Page 9 of 20 Operating the Tap Blue Chilled Water LightOn all the time: This indicates that the chilled water temperature is within the usable range. Flashing slowly : This indicates that the chilled water is not at the...

Page 11 - Setting the Energy Saver Timer

Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Page 11 of 20 Setting the Energy Saver Timer (products with this feature only) Normal Operation (not available on HT boiling only series) Set Time To change time, press either Mode ∧ or Mode ∨ button until Set Time is o...

Page 12 - Auxiliary Fan Attachment; Boiling Water Safety Isolation

Page 12 of 20 Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Auxiliary Fan Attachment (excluding HT boiling only models) Auxiliary fan connection Cold waterconnection Electrical connections The HydroTap is equipped with an auxiliary connection point for an exhaust f...

Page 13 - Trouble Shooting

Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Page 13 of 20 Symptom Possible Cause Solution No LED display, no tap headlights or, no water when taplevers are operated. No water flow. Slow water recovery afteruse. Water not hot. Water not chilled. No power. Plug is ...

Page 14 - Exploded View Chiller Module and Spare Parts

Page 14 of 20 Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Exploded View Chiller Module and Spare Parts Item Kit No. Description Item Kit No. Description 1 Z90613 plumbing fittings kit 14 Z90056 braided hose 2 Z90614 safety solenoid kit 15 Z90635 level sensor kit ...

Page 15 - Exploded View Boiler Module and Spare Parts

Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Page 15 of 20 Exploded View Boiler Module and Spare Parts Item Kit No. Description Item Kit No. Description 1 Z90613 plumbing and fittings kit 13 Z90130 clips kit 2 Z90614 safety solenoid kit 14 Z90628 stop valve and jo...

Page 16 - Exploded View HT Series Boiling Only and Spare Parts; ITEM

Page 16 of 20 Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Exploded View HT Series Boiling Only and Spare Parts ITEM KIT NO. DESCRIPTION 1 Z90656 Plumbing and Fittings kit 2 Z90614 Safety Solenoid Kit 3 Z90657 Single Solenoid Kit 4 Z90658 Gasket and Elbow Kit BC 1...

Page 17 - Notes

Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Page 17 of 20 Notes

Page 20 - Head Office; Warranty Information

Z enith Hydrotap - Installation & Operating Instructions - 81438 - June 2004 Page 20 of 20 Head Office Parex Appliances103 Central Park DrHenderson Auckland Email: [email protected]:www.parex.co.nz Telephone (0 9) 836 6566 Facsimile (09) 836 6033 # Warranty Information The Z enith applianc...