Yazoo/Kees 111793 / CS1372 - Manuals

Page 3 - INDEX

3 Operators Guide Features and Controls .............................................................. 4General Information ................................................................. 5Safety Procedures .................................................................... 5Unpacking Instruction...

Page 5 - SAFETY RULES

5 SAFETY RULES Safety Procedures 1 - Training: • Read the Operator’s manual. If the operator(s) or mechanic(s) can not read English it is theowner’s responsibility to explain this material tothem. • Become familiar with the safe operation of the equipment, operator’s controls, and safetysigns. • All...

Page 7 - ASSEMBLY; Unpacking Instructions; Assembly Instructions; Collection System

7 ASSEMBLY Unpacking Instructions Assembly Instructions Collection System Tools Required: RatchetTorque Wrench1/2" Wrench1/2" Socket9/16" Wrench 1. Cut plastic tie securing the hitch to the crate top. 2. Remove the top of the crate. 3. Remove the plastic bag. 4. Remove the hose. 5. Remov...

Page 13 - Operating the Collection System; OPERATION

13 Operating the Collection System 1. NEVER USE THE COLLECTION SYSTEMWITHOUT THE B L O W E R A S S E M B LYAND HOSES SECURELY ATTACHED. 2. Make sure hoses are connected at bothends. Inspect hoses prior to each use. 3. Do not use the unit on slopes greater than10 degrees. 4. The mower must be running...

Page 14 - Preventative Maintenance Schedule; SERVICE AND MAINTENANCE; Cleaning and Washing

14 Preventative Maintenance Schedule Item Before Every Every Every Each Use 5 Hours 25 Hours 50 Hours Inspect/Clean Poly Mesh X X Check/Tighten Nuts & Bolts X Check/Tighten Hoses X Turn Hose End to End X Rotate Hose X Clean Machine X Inspect Bags X SERVICE AND MAINTENANCE WARNING The collection ...

Page 15 - Caring For Hoses; Cleaning Poly Mesh

15 Caring For Hoses 1. Inspect hoses before each use. If hoses have excessive wear, tears, or punctures, replaceimmediately. 2. To prolong the life of the hose, periodically ro- tate hose and turn hose end to end. Refer toPreventative Maintenance Schedule in thismanual. 3. Avoid twists and sharp tur...

Page 16 - Troubleshooting Guide

16 PROBLEM POSSIBLE CAUSE CORRECTION Loss of Vacuum. 1. Blower, hose or hood inlet clogged. 1. Remove hose and clean inlet. 2. Bags full. 2. Inspect and empty. 3. Fan blades bent or broken. 3. Replace/repair impeller. 4. Poly mesh plugged. 4. Clean poly mesh. Unusual vibration 1. Solid object jammed...

Page 17 - SPINDLE DRIVE ASSEMBLY

17 NOTE: Your Front Weight Bar may look different from those shown in this diagram. SPINDLE DRIVE ASSEMBLY

Page 18 - HOOD ASSEMBLY

18 HOOD ASSEMBLY 97 69-79 (x 8) 11 11-77 (x 2) 99 06-13 (x 2) 99 07-30 (x 2) 20 06-84 (x 30) 99 05-98 (x 16) 97 69-78 (x 8) 20 06-84 (x 30) 20 06-84 (x 30) 20 06-84 (x 30) 99 05-98 (x 16) 99 10-03 (x 8) 11 11-82 11 13-39 11 17-55 11 11-83 10 27-44 (x 11) 10 54-08 (x 12) 10 27-44 (x 11) 11 11-74 11 1...

Page 19 - HITCH ASSEMBLY

19 HITCH ASSEMBLY 11 11-58 (x 2) 11 11-87 (x 4) 99 05-80 (x 3) 99 02-54 (x 4) 99 06-25 (x 4) 11 11-67 11 11-71 97 69-78 (x 3) 97 69-79 (x 22) 10 13-31 (x 2) 11 11-90 97 72-50 (x 2) 99 05-63 (x 20) 97 69-79 (x 22) 11 11-55 99 06-13 (x 2) 99 06-55 (x 2) 10 83-69 (x 2) 97 69-79 (x 22) 99 05-63 (x 20) 1...

Page 20 - BLOWER ASSEMBLY

20 BLOWER ASSEMBLY LOCKING COLLAR THIS SIDE UP THIS SIDE DOWN HUB DOWN 10 25-35 99 07-17 (x 12) 99 01-96 (x 3) 10 67-86 (x 2) 11 13-31 10 67-41 10 81-20 (x 12) 99 00-74 (x 10) 10 04-72 (x 3) 11 13-32 88 03-16 (x 7) 11 12-27 10 26-91 (x 5) 10 26-91 (x 5) 10 67-86 (x 2) 11 12-29 (x 3) 11 17-47 11 12-2...

Page 22 - WEIGHT KIT

22 WEIGHT KIT 20 09-21 11 13-13 10 20-49 (x 2) 10 80-96 (x 2) 11 12-59 (x 2) 97 69-41 (x 4) 99 05-17 (x 4) 97 69-79 (x 4) ER92531 (x 3)

Page 23 - MOUNTING KIT

23 MOUNTING KIT REF. 11 13-22, RIGHT11 11-99, LEFT, NOT SHOWN 10 13-31 (x 6) 11 12-12 99 06-22 (x 6) 11 12-06 (x 2) 10 25-63 (x 4) 11 11-92 (x 2) 99 05-63 (x 6) 11 12-15 (x 2) 97 69-79 (x 6) 11 11-97 09 70-76 99 05-63 (x 6) 10 29-98 (x 2) 97 69-79 (x 6) 99 06-54 (x 2) 11 12-08 (x 2) 11 12-07 (x 2) 1...

Page 24 - BAG ASSEMBLY

24 BAG ASSEMBLY 11 11-68 99 07-17 (x 7) 99 06-92 (x 3) 11 11-66 99 07-17 (x 7) 11 00-63 99 03-16 (x 7) 99 07-99 (x 7)

Page 25 - DRIVE KIT ASSEMBLY

25 DRIVE KIT ASSEMBLY 111775 - 72 INCH DECK 10 57-43 10 57-44 97 69-98 10 89-51 11 13-44 11 16-76 99 05-46 (x 4) 99 01-34 (x 4) 10 89-44 (x 2) 10 44-11 (x 4)

Page 26 - PARTS DESCRIPTION

26 PARTS DESCRIPTION PART NUMBER DESCRIPTION 0 70-76 HOSE CLAMP 6”-& 7” 10 01-41 HCS, 7/16-20 X 1 1/2, GR5 10 04-13 RHSNB, 3/8-16 X 1 1/4, GR5 10 04-72 RHSNB, 5/16C X 1 1/4 10 13-31 NUT, 1/2C, NYLOC 10 17-21 HCS, 5/16-18 X 2 3/4, GR5 10 20-49 CLEVIS PIN 10 20-67 KEY, 1/4” SQ. X 3/4” 10 22-44 BUS...