XtremepowerUS 75117-H - Manuals

Page 2 - IMPORTANT SAFETY INFORMATION

GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. SAFETY The warnings, precautions, and instructions discussed in this i...

Page 5 - DIAGRAM AND SPECIFICATIONS

4 PUMP HOUSING PUMP HOUSING PUMP COVER & GASKET MOTOR MOUNTING FOOT STRAINER COVER TRAINER HOUSING STRAINER BASKET FEATURES AND SPECIFICATIONS 3/4 HP Self-Priming Pump2400GPH1.5” NPT Inlet & OutletThermal ProtectedStrainer Basket IncludedMax Water Temp 105FMax Suction 32ft110V 60HZ 2.8AMP 3 ...

Page 6 - INSTALLATION

5 PUMP LOCATION Locate the system below the pool water line, for best pump performance. Install pump on a firm, level base or pad to meet all local and national codes. The field supplied base or pad must be level. Though the pump is designed for outdoor use, it is strongly advised to protect the ele...

Page 8 - START-UP AND OPERATION

7 PUMP DISCHARGE POSITION Step 1: Remove ALL plumbing attached to pump. Remove pump from base (if applicable). Step 2: Remove strainer housing.  Disengage and lift off strainer cover.  Remove strainer basket.  Lift up on strainer ‘C’ clip and remove.  Slide strainer housing forward and remove. S...

Page 9 - OPERATION

8 EXPLOSION HAZARD: Purging the system with compressed air can cause components to explode, with risk of severe injury or death to anyone nearby. Use only a low pressure (below 5 PSI), high volume blower when air purging the pump, filter, or piping. Allowing the pump to freeze will void the warranty...

Page 10 - SHAFT SEAL CHANGE INSTRUCTIONS

1. Shut off water flow to pump by closing appropriate valves or by plugging both the skimmer outlet port and return port to pool. Disconnect piping or hoses from the motor/pump assembly. 2. Remove the strainer by disengaging and removing the strainer cover. Remove the basket. Lift up on strainer ‘C’...

Page 11 - TROUBLESHOOTING

Page 12 - PARTS LIST

Page 13 - PLEASE READ THE FOLLOWING CAREFULLY; WARRANTY; PRODUCT MADE IN CHINA

12 THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR TH...

XtremepowerUS 75117-H - Manuals

Manuals:

User Manual XtremepowerUS 75117-H

Summary