Page 2 - thoroughly before installing or servicing this equipment.; Read all of these instructions before
2 1 PLEASE READ THE FOLLOWING SAFETY ADVICE PRIOR TO THE OPERATION OF THIS HEATER If you smell gas: 1. Switch off the gas regulator. 2. Extinguish any open flame. 3. If the smell continues immediately call your gas supplier or your fire department. 4. Do not store or use flammable liquids in the vic...
Page 4 - PROHIBITED; HEATER STAND AND LOCATION
6 5 The gas cylinder should only be changed in a ventilated area, away from sources of ignition (candles, cigarettes, and other flame producing appliances) Do not obstruct the ventilation holes of the cylinder housing Switch off the gas tap after use when using red propane cylinders. Switch off the ...
Page 6 - CLEANING AND CARE; products that are combustible or corrosive.; PARTS AND SPECIFICATION; • Transportable terrace/garden heater with cylinder housing.; SPECIFICATIONS; • This heater is best used with propane gas; Gas Consumption; Injector Information; minimum length of 0.5
10 9 CLEANING AND CARE • Wipe off surfaces with soft, moist cloth. Do not clean the heater with cleaning products that are combustible or corrosive. • Remove debris and insects from the burner periodically to keep it clean and safe for use. • Cover the burner unit with the optional protective cover ...
Page 7 - ASSEMBLY PARTS; • Philips screwdriver w/ medium blade; Hardware Contents; Fixing Bracket; NN
12 11 ASSEMBLY PARTS Tools needed: • Philips screwdriver w/ medium blade • Spray bottle of soap solution for leakage test Parts List: N O I T P I R C S E D T R A P QUANTITY 1 Reflector Glass Tube Protective Guard 11 1 N 1 1 L M 4 N O I T P I R C S E D T R A P QUANTITY A 1 B 1 C DE 1 F G 4 H I J K 41...
Page 8 - AA; M6 nut; Assembly Procedure; Hardware Used; CC; CC; Hardware Used; Screw the 3pcs stud (DD) on the top plate; EE; Wing nut; FF; Flat washer
Hardware Used AA BB 1 x 4 x 4 M AA BB Bolt M6x10 M6 nut 14 13 Assembly Procedure 2 Hardware Used CC x 8 screw M5x10 HH x 8 Screw 3/16” 3 HH CC D 1.Assemble the wheel assembly (M) to the bottom plate (N) using 4pcs bolt M6x10 (AA) and 4pcs M6 nut (BB). Hardware Used CC x 8 screw M5x10 2-1. Unscrew th...
Page 9 - GG; Fixing; I I; Large flat washer; Do not cover the front side where the control; silicone ring must be in place; Please unscrew Igniton to put in battery.
16 15 6.Assembly the protective guard (E). Hang the hooks of the protective guard (E) onto the holes in supports Secure the protective guards (E) with fixing brackets (GG) with 4pcs screw Screw 3/16” (HH). Hardware Used 6 E HH GG GG Fixing Bracket x 4 7 8 HH Hardware Used HH x 18 Screw 3/16” II JJ K...
