Page 2 - TABLE OF CONTENTS
23861-1-0308 Page 2 SECTION PAGE Important Safety Information .................................................................................................3Introduction ............................................................................................................................3Cl...
Page 3 - IMPORTANT SAFETY INFORMATION
23861-1-0308 Page 3 The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1 (latest edition) and to the National electrical Code, ANSI/NFPA70 (latest edition).NOTE: Installation and repair should be done by a quali- fied service p...
Page 4 - CLEARANCES
23861-1-0308 Page 4 Sidewall Clearances: The clearance from the inside of the firebox to perpendicular combustible side wall should not be less than 6". See Figure 1. Firebox Side and Back Clearances: The firebox outer casing side and back flanges are zero clearance to combustibles. Top Framing and...
Page 5 - FIREBOX INSTALLATION INSTRUCTIONS
23861-1-0308 Page 5 Select Vent-Free Firebox Framing Dimensions (in inches) "A" "B" "C" Model Framing Height Framing Width Framing Depth VFS32FB 41 1/2" 35" 23" VFS36FB 41 1/2" 40" 23" VFS42FB 41 1/2" 44" 23" Attention: Add 3-3/4" to ...
Page 6 - FIREBOX INSTALLATION INSTRUCTIONS (continued)
23861-1-0308 Page 6 Figure 6 Firebox Dimensions J K H I A G F B E C D L M SELECT FIREBOX INSTALLATION INSTRUCTIONS (continued) SELECT REFERENCE LETTER FLUSH VFS32 VFS36 VFS42 A 41 1/8" 41 1/8" 41 1/8" B 34 1/2" 39 1/2" 43 1/2" C 23 7/16" 23 7/16" 23 7/16" D 26 3/8...
Page 8 - GAS LINE CONNECTION
23861-1-0308 Page 8 The firebox is designed to accept a 3/8-inch gas line for an approved vent-free gas logset. Have the line installed by a qualified service person in accordance with all building codes. Consult local building codes to properly size the gas supply line leading to the 3/8-inch hook-up...
Page 9 - OPTIONAL SINGLE SPEED BLOWER INSTALLATION INSTRUCTIONS; Select Firebox Models
23861-1-0308 Page 9 OPTIONAL SINGLE SPEED BLOWER INSTALLATION INSTRUCTIONS Attention: Install blower assembly before connecting gas inlet supply line. Wiring The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the Nation...
Page 12 - JUNCTION BOX WIRING INSTALLATION INSTRUCTIONS; PARTS LIST
23861-1-0308 Page 12 CAUTION: ALL WIRING SHOULD BE DONE BY A QUALIFIED ELECTRICIAN AND SHALL BE IN COMPLIANCE WITH ALL LOCAL, CITY AND STATE BUILDING CODES. BEFORE MAKING THE ELECTRICAL CONNECTION, MAKE SURE THAT MAIN POWER SUPPLY IS DISCONNECTED. THE APPLIANCE, WHEN INSTALLED, MUST BE ELECTRICALLY ...
Page 14 - PARTS VIEW; HOW TO ORDER REPAIR PARTS
23861-1-0308 Page 14 PARTS VIEW Parts can be ordered through your service person or dealer. For best results, the service person or dealer should order parts through the distributor. Parts can be shipped directly to the service person/dealer. All parts listed in the Parts List have a Part Number. Wh...
Page 15 - ACCESSORIES
23861-1-0308 Page 15 Accessory Description Model Numbers Fan Kit 1 2 Designed to provide forced air flow. FBB5 Variable Speed Control Kit Wall mounted variable speed control for use with FBB5 blower SCV-1 Frame Kits Standard 3-Piece Frame Kits Black, Brass, Stainless Steel, or Hammered Pewter Extrude...
Page 16 - EMPIRE
23861-1-0308 Page 16 Extended 4" Hoods Extended hoods that extend out 2" farther than the standard hoods, to accommodate thicker surround materials. Available as optional kits in Black, Brass, Hammered Pew- ter, and Stainless Steel finishes. Contact dealer for all available optional hood acce...