White Mountain VFP32FB2DL-2 - Manuals

23859-1-0308 Page 5 Premium Vent-Free Firebox Framing Dimensions (in inches) "A" "B" "C" Model Framing Height Framing Width Framing Depth VFP32FB 41 1/2" 35" 21" VFP36FB 41 1/2" 40" 21" VFP42FB 41 1/2" 44" 21" Attention: Add 3-3/4" to &...

23859-1-0308 Page 6 Figure 7 Firebox Dimensions H J K I A G F B E H I A G F B E C D L M PREMIUM LOUVERED PREMIUM FLUSH FIREBOX INSTALLATION INSTRUCTIONS (continued) PREMIUM LOUVERED FLUSH VFP32 VFP36 VFP42 VFP32 VFP36 VFP42 A 41 1/8” 41 1/8” 41 1/8” 41 1/8” 41 1/8” 41 1/8” B 34 1/2” 39 1/2” 43 1/2” ...

23859-1-0308 Page 7 Locating Firebox Place firebox in framing opening. Use the four (4) framing brackets provided on the firebox to attach firebox to framing. Different hole locations can be used for finishing materials with thicknesses of 3/8", 1/2" and 3/4". Attach these materials with scr...

23859-1-0308 Page 8 The firebox is designed to accept a 3/8-inch gas line for an approved vent-free gas logset. Have the line installed by a qualified service person in accordance with all building codes. Consult local building codes to properly size the gas supply line leading to the 3/8-inch hook-up...

23859-1-0308 Page 9 OPTIONAL FRESH AIR KIT INSTALLATION INSTRUCTIONS FOR DELUXE AND PREMIUM FIREBOXES 4. Next, with the vise grip attached, feed the long control rod through the small rectangular opening at the left side of the firebox face. Carefully position the rod and bracket so that the bracket ...

23859-1-0308 Page 10 with the hole in the front flange of the movable air door. See Figure 18. 7. Once the control rod is fed through the air door hole, gently lift the outer air door plate assembly inward and upward until the mounting holes in the plate line up with the pilot holes in the side wrap....

23859-1-0308 Page 11 Completion of Air Kit installation 1. Determine the length of 4” Dia. rigid or flex duct connector (installer supplied) you will need from the firebox/fireplace to the exterior surface of the outside wall, where the air kit hood will be installed. Add a few extra inches to the leng...

23859-1-0308 Page 12 OPTIONAL SINGLE SPEED BLOWER INSTALLATION INSTRUCTIONS Attention: Install blower assembly before connecting gas inlet supply line. Wiring The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the Natio...

23859-1-0308 Page 15 CAUTION: ALL WIRING SHOULD BE DONE BY A QUALIFIED ELECTRICIAN AND SHALL BE IN COMPLIANCE WITH ALL LOCAL, CITY AND STATE BUILDING CODES. BEFORE MAKING THE ELECTRICAL CONNECTION, MAKE SURE THAT MAIN POWER SUPPLY IS DISCONNECTED. THE APPLIANCE, WHEN INSTALLED, MUST BE ELECTRICALLY ...

23859-1-0308 Page 16 PARTS LIST INDEX NO. PART NUMBER DESCRIPTION VFP32FB2DL VFP32FB2EL VFP32FB2CL VFP32FB2DF VFP32FB2EF VFP32FB2CF 1 17247 17247 17247 17247 17247 17247 TOP STANDOFF 2 17169 17169 17169 N/A N/A N/A UPPER LOUVER 3 10554 10554 10554 10554 10554 10554 FRAMING BRACKET 4 17170 17170 1717...

23859-1-0308 Page 17 Parts can be ordered through your service person or dealer. For best results, the service person or dealer should order parts through the distributor. Parts can be shipped directly to the service person/dealer. All parts listed in the Parts List have a Part Number. When ordering...

23859-1-0308 Page 18 PARTS VIEW 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 16 17 17 21 19 20 18

23859-1-0308 Page 19 Accessory Description Model Numbers Fan Kit 1 2 Designed to provide forced air flow. FBB5 Variable Speed Control Kit Wall mounted variable speed control for use with FBB5 blower SCV-1 Fresh Air Kit 1 2 8 4 7 6 5 3 Deluxe and Premium Fireboxes BVA-1 Frame Kits Standard 3-Piece Fra...

23859-1-0308 Page 20 Extended 4" Hoods Extended hoods that extend out 2" farther than the standard hoods, to accommodate thicker surround materials. Available as optional kits in Black, Brass, Hammered Pew- ter, and Stainless Steel finishes. Contact dealer for all available optional hood acce...