Page 2 - INSTALLATION REQUIREMENTS; Tools and Parts; Tools Needed; Location Requirements; Your safety and the safety of others are very important.; DANGER
2 BUILT-IN OVEN SAFETY INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools Needed ■ Phillips screwdriver ■ Measuring tape ■ Drill (for wall cabinet installations) ■ 1 /...
Page 4 - Flush Installations
4 Cabinet Dimensions - Double Ovens, Flush Installations A 25 3 / 8 " (64.4 cm) minimum cutout depth is required. These dimensions will result in a 1 / 4 " (6 mm) reveal on the top, a 1 / 4 " (6 mm) reveal on the sides, and a 1 / 8 " (3 mm) reveal on the bottom of the wall oven.The ...
Page 5 - INSTALLATION INSTRUCTIONS; Prepare Built-In Oven; WARNING
5 INSTALLATION INSTRUCTIONS Prepare Built-In Oven NOTES: ■ Refer to the following “Installation Instructions” and the “Installation Instructions” section of the Installation Instructions provided with your built-in oven. ■ Refer and adhere to the “Electrical Requirements” section, and complete the i...
Page 6 - Positioning Oven Feet; Single Ovens
6 Replace Oven Door(s) 1. Using two hands, grasp side edges of door at the midpoint. Face the oven cavity. 2. Locate the slots on each side of the oven cavity for the door hinge locks. 3. At a 45° angle, align door hinges with slots in the lower front of the oven cavity. Slowly insert door, making s...
Page 7 - Replace Plastic Spacers; Replace Plastic Spacers on Single Ovens
7 1. Using 2 or more people, place the oven on its back on a covered surface. 2. Install a foot on the left rear spacer using a #8-18 x 3 / 8 " screw. NOTE: Position the foot so the long side of the foot is facing toward the top of the oven. 3. In the same manner, install a foot on the right rea...
Page 8 - Replace Plastic Spacers on Double Ovens; Install Oven
8 3. In the same manner, remove and replace the plastic spacer on the left side of the oven. Replace Plastic Spacers on Double Ovens 1. Remove the 2 screws, 1 in each spacer, attaching the 2 plastic spacers (A) to the right side of the oven. 2. Using the 2 screws removed, install 2 new plastic space...