Whirlpool UXT4030AA - Manuals

3 PREPARE THE HOOD - CONT. PREPARE THE INSTALLATION LOCATION FIG. 2 FIG. 3 FIG. 5A FIG. 5B UXT2030AA UXT2036AA FIG. 4 UXT3030AA UXT3036AA UXT4030AA UXT4036AA 3. Remove top or rear electrical knockout. (FIG. 2) 4. (UXT3030AA and UXT3036AA hoods ONLY ) Remove duct knockout. Insert screwdriver under ed...

5 INSTALLING RANGE HOOD WARNING TURN OFF THE PROPER CIRCUIT AT THE SERVICE ENTRANCE BEFORE WIRING THIS RANGE HOOD. 1. Run electric wiring through hole drilled in wall or cabinet. Split wiring for 6" and install proper connector for type of wire used. (FIG. 9) FIG. 9 FIG. 11 6. Strip 1/2" of ...

6 USE AND CARE SWITCHES The fan and light are each controlled by a rocker switch. The light switch has two positions, "ON" AND "OFF". The fan switch has three positions - "HIGH", "LOW" and "OFF". ("OFF" is the middle position.) FILTERS UXT3030AA, UXT30...