Whirlpool gas range - Manuals

6 COOKTOP USE Electric igniters automatically light the surface burners when control knobs are turned to IGNITE.Before setting a control knob, place filled cookware on the grate. Do not operate a burner using empty cookware or without cookware on the grate. To Set: 1. Push in and turn knob countercl...

7 4. Replace the burner cap, making sure the alignment pins are properly aligned with the burner cap. 5. Turn on the burner. If the burner does not light, check cap alignment. If the burner still does not light, do not service the sealed burner yourself. Contact a trained repair specialist. Griddle ...

8 12-Hour Shutoff The oven control is set to automatically shut off the oven 12 hours after the oven initiates a cook or clean function. This will not interfere with any timed or delay cook functions. Press and hold START TIME for 5 seconds to toggle to the 12-hour shutoff function. Scrolling text w...

9 Multiple Rack Cooking 3-rack: Use rack positions 1, 3 and 5 or 2, 3 and 5.2-rack: Use rack positions 2 and 5.Baking Layer Cakes on 2 Racks For best results when baking cakes on 2 racks use racks 2 and 5. Place the cakes on the racks as shown. Oven Vent The oven vent releases hot air and moisture f...

10 Timed Cooking To Set a Timed Cook: 1. Press BAKE, CONVECT or CONTROL BAKE (on some models). 2. Press the SET TEMP/TIME “+” or “-” arrow pads to enter a temperature other than the one displayed. 3. Press COOK TIME. The cook time oven indicator light will light up. 4. Press the SET TEMP/TIME “+” or...

11 RANGE CARE Self-Cleaning Cycle (on some models) IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well-ventilated room.Do not block t...

13 TROUBLESHOOTING First try the solutions suggested here or visit our website and reference the Frequently Asked Questions (FAQs) section to possibly avoid the cost of a service call. www.whirlpool.com Nothing will operate ■ Is the power supply cord unplugged?Plug into a grounded 3 prong outlet. ■ ...

14 Display shows messages ■ Is the display showing a flashing time?There has been a power failure. Clear the display. On some models, reset the clock, if needed. See “Clock” keypad feature in the “Feature Guide” section. ■ Is the display showing a letter followed by a number?Depending on your model,...

15 WHIRLPOOL CORPORATION MAJOR APPLIANCE WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) wi...