Wharfedale 10.7 - Manuals - manualsarea.com

Page 3 - Specifications; Loudspeakers; Contents; Good Practice Guide

Specifications Format Bass Driver Bass/mid driver Midrange Driver Tweeter Amplifier power (rec.) Impedance (Nominal) A/V shielded Sensitivity (1W@1M) Nominal Frequency Range HF Limit (-10dB) Freq. Fb Crossover Frequency Dimensions (HxWxD) (mm) ) Height on feet/spikes (mm) Stand mount–100mm 25mm15 - ...

Page 4 - Preliminaries; Looking After Your Loudspeaker

Preliminaries Diamond 10 loudspeakers come in many shapes and sizes. If you are unpacking the larger loudspeakers or asubwoofer, please remember that these units are heavy. We suggest that you have someone to assist you. Lift the loudspeaker carefully out of the packing. Do NOT try and lift the loud...

Page 5 - Delay and LFE Settings; Troubleshooting; Choosing Loudspeaker Cable; Crossover Networks

Delay and LFE Settings The purpose of delay is to enable surround and dialogue information to arrive at the listener’s ears at the same timeas the Front channels, even when the listening seat is in a non-ideal position. If the listening position is equidistant from the Front and Rear speakers, a low...

Page 6 - Placement; Front And Effects Channels:; Setting Up a Home Theatre System; LFE

Positioning the Front Loudspeakers The 10.3, 10.4,10.5, 10.6 and 10.7 models are designed to be floor standing. We suggest that they are positioned at least 200mm from the rear walls and 700 mm from the side walls, facing slightly inwards. The 10.1, and 10.2 models should be standor wall mounted tho...

Page 7 - Setting the Phase of the Subwoofer:; Fine Tuning Procedures; D10 DFS Surround Loudspeakers; Wall mounting the D10 SR:; Positioning Surround Loudspeakers; Alternative 5.1 System Layouts with D10 DFS Surrounds; Alternative 5.1 System Layouts with D10 SR Surrounds

Listening rooms are not ideal. Because of room geometry and construction there will be areas with severe peaks atsome frequencies and severe troughs at others. If you site loudspeakers in such areas the response will be highlynon-flat. It is easier to treat high frequency irregularities by the use o...

Page 8 - Standard Connection; AMPLIFIER; Connecting the Front Loudspeakers; RIGHT SPEAKER; STANDARD CONNECTION; RIGHT SPEAKER; Operating Your Subwoofer; Initial Settings; Phase Switch

Standard Connection Bi-Wiring Bi-Ampifying (Bi-Amping) Choose a suitable length of twin core speaker cable for each channel, and prepare the ends. Unscrew each terminal a few turns. Connect the red, positive (+) terminal of the Left loudspeaker to the corresponding red, positive (+) amplifier termin...

Page 9 - Connecting to a Digital AV Processor; Using a Y Adaptor; Pre Out - Main In Connections; Connecting Your Subwoofer - 2; PRE; FRONT LEFT; RIGHT; Connecting Centre and Surround Loudspeakers; SURROUNDS; RIGHT; SURROUNDS; Multichannel 5.1 System Connections

HF - BA S S - H F+ BA S S+ HF - BA S S - H F+ BA S S+ LEFT INPUT OUTPUT RIGHT LEFT INPUT OUTPUT LINE LEVEL LINE LEVEL RIGHT LEFT INPUT OUTPUT RIGHT Connecting to a Digital AV Processor Stereo Line Level Connections High Level (loudspeaker) Connections If your AV processor has a line level or LFE sub...

Page 10 - Diamond 10 Subwoofers; Connecting Your Subwoofer - 1; The 10. MX-Sub has one additional feature

Introduction Preparing the Subwoofer Positioning the Subwoofer Wharfedale subwoofers are intended for use with high quality domestic sound systems. They are equally effective in Stereo and Home Cinema applications. Your subwoofer will probably be used in conjunction with Wharfedale loudspeakers thou...