Westinghouse UW32SC1W - Manuals

E n g lis h IMPORTANT INFORMATION IMPORTANT INFORMATION War nings To reduce the risk of fire or electric shock: • Do not expose this product to rain or moisture. • Do not remove the rear cover. There are no user-serviceable parts inside. Refer all servicing requirements to qualified service personne...

E n g lis h IMPORTANT INFORMATION NOTICES Important Notices Concerning Power Cord Selection The specific power cord for this LED TV is enclosed and has been selected according to the country of destination. Use the enclosed power cord to prevent electric shock. Observe the following guidelines if it...

E n g lis h IMPORTANT INFORMATION FCC COMPLIANCE STATEMENT This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa...

E n g lis h IMPORTANT INFORMATION Cir cuit Over load Do not overload wall outlets, extension cords, or power strips. This can result in a fire or electronic shock. Power Cor d Pr otection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon ...

E n g lis h IMPORTANT INFORMATION ANTENNA INSTALLATION SAFETY Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LED TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code...

E n g lis h IMPORTANT INFORMATION CLEANING THE LED TV • Make sure the LED TV is turned off and the power cord is disconnected from the power outlet. • Never spray or pour any liquid directly onto the screen or the case. To clean the screen : 1 W ipe the screen with a clean, soft, lint-free cloth. Th...

E n g lis h PACKAGE CONTENTS PACKAGE CONTENTS 32 ” LED TV Unit Remote Control (with 2x AAA batteries) LED TV Base User Manual Power Cord Warranty Card AC Adapter Warranty Brochure Screws for Base 10

E n g lis h CONTROL PANEL CONTROL PANEL T L I te m D es c ri p ti on 1. Power Toggles the power on and off. 11

E n g lis h TERMINALS TERMINALS I t em F u nc t io n 1. DC in Connects the AC to DC adapter from this outlet to a power source. 2. Audio in Connects to the audio out port of a computer. 3. VGA Connects to a computer or other device with a VGA output using a 15-pin VGA cable. 4. Composite AV input Co...

Item Description 1. Mute Mutes the sound. Press again to toggle the sound back on. 2. Power Toggles the TV power on or off. 3. Channel keys Use to key in the channel number. 4. Enter ENT Executes a channel entry. 5. Sleep Sets the sleep timer for the LED TV to turn off automatically. 6. VGA Switches...

E n g lis h REMOTE CONTROL OPERATION REMOTE CONTROL OPERATION INSTALLING THE REMOTE CONTROL BATTERIES C AU T I O N S : • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Insert batteries accor...

E n g lis h LED TV BASE LED TV BASE C AU T I O N : Th e LE D TV u ni t ma y b e to o h ea vy f o r on e pe rs o n t o lift . I f th is is th e c ase , m ak e su r e to a sk fo r a ssi sta nc e in ha nd li n g th e LE D TV t o p r eve nt p h ys ic al i nj ur y a nd /o r d amag e to t he u ni t. INSTA...

E n g lis h REMOVING THE LED TV BASE REMOVING THE LED TV BASE If you intend to repack the LED TV unit (for shipping or storage) or you want to change the installation to a wall mount option, you must first remove the LED TV base. 1 Turn off the LED TV and all connected devices. 2 Disconnect the powe...

E n g lis h ANTENNA CONNECTION ANTENNA CONNECTION OUTDOOR ANTENNA CONNECTION Cable TV lead in VHF, UHF or VHF/UHF combination antenna 75 ohm coaxial cable (round) 300 ohm twin-lead (flat) 300-75 ohm ADAPTER (Not supplied) RF IN Separate VHF/UHF Antenna VHF Antenna UHF Antenna 300 ohm twin-lead COMBI...

E n g lis h EXTERNAL DEVICE CONNECTIONS • A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TV's channel keys. • B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converter's chann...

E n g lis h HD M I 1 HD M I 2 SP DI F U SB EXTERNAL DEVICE CONNECTIONS The following diagram shows the external device connections. VGA Audio amplifier 3.5 mm stereo mini jack cable RGB cable Audio cable AUDIO OUT SPDIF cable DC IN TUNER VGA AUDIO IN VIDEO R IN L R OUT L AC to DC adapter Antenna cab...

M E NU V OL C H IN P UT E n g lis h HD M I 1 H DM I 2 SP D IF US B POWER CONNECTION POWER CONNECTION CONNECTING AC POWER I M P O R TAN T: Th e L E D TV i s des ig ne d to b e p o we re d vi a an A C adap t er. Us e O N LY t he A C a d ap te r in clu d ed i n th e pac kag e . Tu r n o ff al l c on ne...

E n g lis h POWER CONNECTION CABLE OR SATELLITE BOX CONNECTION SETUP Select Language Use the up and down arrows on your HDTV control panel or remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use the up and down arrows on your HDTV control p...

E n g lis h POWER CONNECTION Cable/Satellite Box Input Use the up and down arrows on your HDTV control panel or remote control to select the input connected to the set top box. Press SELECT to continue. Press Go Back to return to the previous screen. RF Warning Use the up and down arrows on your HDT...

E n g lis h POWER CONNECTION Select Input Source Use the up and down arrows on your HDTV control panel or remote control to select the input source. Press SELECT to continue. Press Go Back to return to the previous screen. 24

E n g lis h POWER CONNECTION Select Channel Scan Type Use the up and down arrows on your HDTV control panel or remote control to select the channel scan type. Press SELECT to continue. Press Go Back to return to the previous screen. Channel Scan in progress The channel scan may take a while to compl...

E n g lis h BASIC OPERATIONS BASIC OPERATIONS TURNING THE POWER ON AND OFF Turning on the power Press on the control panel or on the remote control to turn on the LED TV. Turning off the power Press on the control panel or on the remote control to turn off the LED TV. The LED behavior will depend on...

E n g lis h BASIC OPERATIONS CHANGING CHANNELS Follow the instructions below to change channels. Using the Ch / Buttons Browse channels To browse through the available channels, press Ch / on the remote control or on the control panel. Using the Channel Keys Selecting channel To change to a certain ...

E n g lis h BASIC OPERATIONS Using the Input Key Select source using Input Key 1 Press Input . 2 A list of supported video sources is displayed. 3 Press / to select the preferred source. 4 Press to switch to the selected input source. ADJUSTING THE DISPLAY FORMAT The input source can sometimes affec...

E n g lis h SETUP MENUS SETUP MENUS SETUP MENU OPERATION Use the setup menus to configure the various operational settings of the LED TV. Displaying the setup menu screen Press on the remote control or MENU on the control panel to display the setup menu screen. Navigating the setup menu screen Use t...

E n g lis h SETUP MENUS PICTURE Use the Picture sub-menus to configure the display quality. Press on the remote control or MENU on the control panel to display the setup menu screen then select Picture to display the Picture sub-menu. The following options are available: Picture Settings, Screen Siz...

E n g lis h SETUP MENUS Picture mode Use this sub-menu to select one of four preset view options optimized for different viewing conditions. The following options are available: • Standard: Select for standard picture. • Movie: Select for a finely detailed picture. • User: Select for standard pictur...

E n g lis h SETUP MENUS Color Use Color to adjust the color intensity. Adjusting Color 1 Use the / keys to select Color and press . 2 Press the / keys on the remote control to adjust the Color level. 3 Press to save and exit the screen. Tint Use Hue to adjust the balance of the red, green, and blue ...

E n g lis h SETUP MENUS 2 Press the / keys on the remote control to adjust the sharpness level. 3 Press to save and exit the screen. Screen Size Press / to selet the display aspect ratio till the picture is fit onto the screen. The options are different according to different input source. VGA sourc...

E n g lis h SETUP MENUS Auto Adjust Automatically adjust Clock, Phase, H-Position and V-Position settings. In order to get a good result, you should open a "filling the screen" picture before executing Auto Adjust. H.Position Shift the screen slightly to left or right. V.Position Shift the s...

E n g lis h SETUP MENUS Phase Adjust the DB15 picture signal sampling phase. It maybe affect the definition. Wrong value maybe result the interference. Reset Reset the parameters of current menu to default value. Adjusting VGA Settings 1 Use the / keys to select VGA Settings and press . 2 Press the ...

E n g lis h SETUP MENUS Advanced Picture Settings • Dynamic Contrast (Off/On) The system will adjust the luminance curve by analyzing the picture content dynamically. • Film Mode (Off/On) For the 2:2 or 3:2 format signal of cinema, enable special pixel process to reduce the flick of moving area. • N...

E n g lis h SETUP MENUS SOUND Use the Sound sub-menus to configure the sound quality. Press on the remote control or MENU on the control panel to display the setup menu screen then select Sound to display the Sound sub-menu. The following options are available: Sound Settings, Analog Sound, Digital ...

E n g lis h SETUP MENUS Sound mode Use this sub-menu to select one of four preset view options optimized for different listening conditions. The following options are available: • Standard: Select for standard picture. • Soft: Select for a finely detailed picture. • User: Select for standard picture...

E n g lis h SETUP MENUS Balance Use Balance to adjust the sound balance between the L/R speakers. Adjusting Balance 1 Use the / keys to select Balance and press . 2 Press the / keys on the remote control to adjust the Balance level. 3 Press to save and exit the screen. Analog Sound (SAP/Stereo/Mono)...

E n g lis h SETUP MENUS Equalizer Settings Use this sub-menu to select one of four preset audio options optimized for different sounding conditions. The following options are available: • Rock: Sets the equalizer to the Rock mode. • Pop: Sets the equalizer to the Pop mode. • Jazz: Sets the equalizer...

E n g lis h SETUP MENUS CHANNEL Use the Channel sub-menus to configure the channel. Press on the remote control or MENU on the control panel to display the setup menu screen then select Channel to display the Channel sub-menu. The following options are available: Channel List, Favorite List, Channel...

E n g lis h SETUP MENUS Favorite List All of you favorite channels are listed in this menu, and you can choose them quickly. Channel Setting Set the favorite channels, skipped channels, label of channels. • Skip: Set the channel to be skipped when using CH+/CH- to view channels. • Favorite: Set the ...

E n g lis h SETUP MENUS Change the settings • Skip & Favorite Press / to select the channel you want to set. Press / to highlight corresponding item, and press SELECT to set or cancel. • Label Press / to select the channel and SELECT to enter the edit state. Press / to select the character, pres...

E n g lis h SETUP MENUS PARENTAL CONTROL Use the Channel sub-menus to configure the parental control. Press on the remote control or MENU on the control panel to display the setup menu screen then select Parental Control to display the Parental Control sub- menu. The following options are available:...

E n g lis h SETUP MENUS R a t in g D es c ri p ti on TV-Y Suitable for young children. TV-Y7 May not be suitable for children under 7. TV-G Suitable for all audiences. TV-PG Parental guidance suggested. TV-14 Parental guidance suggested for children under 14. TV-MA Suitable for mature audiences only...

E n g lis h SETUP MENUS Change Password Change Password allows you to change your current password. Changing Password 1 Use the / keys to select Change Password and press . 2 Use the Channel keys to enter the current password and press . 3 Use the Channel keys to enter the new password and press . 4...

E n g lis h SETUP MENUS SETUP Use the Settings sub-menus to configure the LED TV operational setup and view the current firmware version. Press on the remote control or MENU on the control panel to display the setup menu screen then select Setup to display the Settings sub-menu. The following option...

E n g lis h SETUP MENUS Menu Language Use Menu Language to select the language to display on the screen: English, French, or Spanish. Adjusting Menu Language 1 Use the / keys to select Menu Language and press . 2 Press the / keys on the remote control to select English, French or Spanish . 3 Press t...

E n g lis h SETUP MENUS • Setup Time Set Auto Clock to Off, then you can set the time manually . NOTE: In the case of loss of power, the clock setting will be lost. • Day of Week The TV will calculate current day of week according to the time. • Daylight Saving Time When Auto Clock set to ON, this i...

E n g lis h SETUP MENUS OTHERS Blue Back Set the screen background color blue or not when no valid signal input. When analog TV input and has no signal, snow noise will display if this option is cleared. No Signal Power Off If it is set, TV will automatically enter standby after 10 minutes without s...

E n g lis h WALL MOUNT OPTION WALL MOUNT OPTION The LED TV has been fitted with VESA FPMPMI compliant mounting holes. These 200 x 100 mm mounting holes allow the unit to be mounted on a wall. Use the four M6 x L12 mm screws to wall mount the LED TV. WALL MOUNT INSTALLATION REMINDERS • Remove the LED...

E n g lis h TROUBLESHOOTING TROUBLESHOOTING P r o bl em Co r r e c ti ve Ac t i o n No power • Make sure the power indicator is illuminated blue. • Make sure the power cord is securely connected to the AC-in jack and is plugged into a functional AC outlet. You may want to plug in another electrical ...

E n g lis h TROUBLESHOOTING P r o bl em Co r r e c ti ve Ac t i o n No picture or the No Signal message appears when a VGA cable is connected. • Make sure the VGA cable is properly connected to the LED TV’s VGA port. • Decrease the video resolution setting on the computer and try again. • Adjust the...

E n g lis h TROUBLESHOOTING P r o bl em Co r r e c ti ve Ac t i o n No sound • Make sure the audio input cable is properly connected to the correct terminal, and that the correct input mode is enabled. • The volume may be muted, press or Vol+ key to turn on the volume. • Adjust the Bass, Treble, and...

E n g lis h SPECIFICATIONS SPECIFICATIONS I t em Sp e ci f i ca ti on Model Name UW32SC1W Panel Active Area (Diagonal, mm) 697.685 (H) x 392.256 (V) Resolution 1366 (H) x 768 (V) Contrast Ratio (min) 3000:1 Response Time (min) 6.5ms(g-g) Aspect Ratio 1.77 (16:9) Display color 16.7M Audio/Video Input...