Westinghouse P2650HR - Manuals

5 GENERAL INFORMATION Feature Your TV is designed with the latest technology and is a high-performance unit that includes the following special feature: • Multiple sources input included RF IN, D-SUB, HDMIx2, Compositex2, S-Videox2, and Componentx2. • Built-in combo tuner is able to receive ATSC, NT...

11 INSTALLATION AND FUNCTION ADJUSTMENT Installation 1. Insert Batteries into Remote Control 1. Remove the battery cover. 2. Insert two size AAA batteries corresponding to (+) and (-) marks on the battery compartment. CAUTION ‧ Only use AAA batteries. ‧ Do not mix new and old batteries. This may res...

13 3. Connect USB converter Connect the USB converter device into the USB port of the TV for command control functionality. 4. Connect power cables Connect the power cord to the LCD TV then to a proper AC outlet. IMPORTANT: The power input voltage for TV is 120Vac, before beginning; make sure all de...

14 How to remove the BASE a. Carefully place the TV face down on a soft clean surface. b. Remove the four screws underneath the BASE. (See picture below) c. Pull out the BASE from the TV.

15 Function adjustment There are four main Setup Menus; these are Settings, Channels, Locks and Guide. All the functions can be adjusted either by the remote control or by using the control keys on the LCD TV’s right side. Viewing OSD Menu To display the main menu, press the Menu button on the right...

16 3D Comb Filter: Press arrow keys to select or adjust your preferred settings. Off/Low/Medium/High Temporal NR: Press arrow keys to select or adjust your preferred settings. Off/Low/Medium/High Audio Setting Bass, Treble & Balance Use arrow keys to adjust the bass, treble and balance. Optical ...

17 Caption Preference Select Always Basic/Always Advanced/Automatic. Timers Select automatic power-on time. Date & Time Set Date & Time. Menu Language Use arrow keys to adjust Menu Language. Select OSD language. Input Use arrow keys to adjust Input Source labels. System Info Display importan...

19 Find Channel Enter channel number via number key then press DONE button to find a channel. You may be required to enter four digits pin number if pin number was set before. Channel Name Edit Edit the channel name in channel list. Enter the edited channel, press “enter” button of remote control, s...

21 Channel Locks To set which channels are locked, use arrow keys to lock one or more channels. Select button on menu to lock and unlock channels. Guide Show program information for the current channel, such as signal strength, resolution, channel number, V-chip, CC, and Program Title.

22 INSTALLER FUNCTIONS RS232 Connection The Westinghouse commercial display can be controlled by a personal computer with an RS-232C port. Plug the USB-RS232 converter into the USB port of the TV. This will enable RS232 communications to and from the TV. Connect the RS-232 input jack to an external ...

25 TROUBLESHOOTING There is no picture or sound. ▪ Make sure the AC adapter is connected. ▪ Verify that there is a valid source signal. ▪ Make sure the correct input mode is selected. There is no picture from AV. ▪ Make sure the BRIGHTNESS is properly adjusted. ▪ The florescent lamp may have reached...

28 PC INPUT PRESET TIMMING TABLE * The resolution and the frequencies are displayed on the screen may not exactly same as this list. PC / Timing Table No. Mode Name Resolution H.Freq. V.Fre. H. Polarity V. Polarity Pixel CLK (MHz) Hor. Total CLK No. Hor. Display CLK No. Hor. Bck Porch CLK No. Hor. S...