Weslo WLTL29321 - Manuals

Weslo WLTL29321 – Manual in PDF format online.

Manuals:

Manual

Manual Weslo WLTL29321

Summary

Page 3 - SAVE THESE INSTRUCTIONS

The decals shown have been placed on your treadmill. If a decal is missing, or if it is not legible, pleasecall our Customer Service Department, toll-free, to order a free replacement decal (see ORDERING RE-PLACEMENT PARTS on the back cover of this manual). Apply the decal in the location shown. Not...

Page 4 - Congratulations for selecting the new WESLO; BEFORE YOU BEGIN; Handrail; BACK; Console

Congratulations for selecting the new WESLO ® CA- DENCE C42 treadmill. The CADENCE C42 treadmillcombines advanced technology with innovative designto help you get the most from your exercise in the con-venience and privacy of your home. And when you’renot exercising, the unique CADENCE C42 can befol...

Page 5 - ASSEMBLY; Make sure that the power cord is unplugged.; Round Hole; Side View

ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do notdispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt iscoated with high-performance lubricant. During shipping, a small amoun...

Page 6 - With the help of a second person, tip the treadmill so the; Do not tighten the Bolts yet.; Large; Touch the Right; Tie

4. Feed the Wire Harness (21) up into the rectangular bracket on one of the Handrails (1) and out of the largehole in the left side. Note: It may be helpful to useneedlenose pliers to pull the Wire Harness out of thelarge hole. Remove any plastic ties from the rectangular bracket onthe Handrail (1)....

Page 7 - Ties; Make sure that no wires are; Do not overtighten

7 9. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust thewalking belt (see page 13). To protect the floor or carpet, place a mat under the t...

Page 8 - OPERATION AND ADJUSTMENT; THE PERFORMANT LUBE; WALKING BELT; HOW TO PLUG IN THE POWER CORD; Grounded Outlet Box

8 OPERATION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated withPERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or othersubstances to the walking belt or the walking plat-form. Such substances will deteriorate ...

Page 9 - Follow the steps below to operate the console.; Insert the key fully into the console.; Heart Rate; CONSOLE DIAGRAM; Displays

9 STEP-BY-STEP CONSOLE OPERATION Before operating the console, make sure that thepower cord is properly plugged in (see page 8). Locate the on/off circuitbreaker near the power cord.Make sure that the circuitbreaker is in the on position. Next, stand on the footrails of the treadmill.Find the clip a...

Page 10 - button to change the unit of measurement.

10 As you exercise, change the speed of the walkingbelt as desired by pressing the Speed buttons.Each time a button is pressed, the speed settingwill change by 0.1 mph; if a button is held down,the speed setting will change in increments of 0.5mph. Note: The console can display speed anddistance in ...

Page 11 - HOW TO FOLD AND MOVE THE TREADMILL; HOW TO FOLD THE TREADMILL FOR STORAGE; Catch

11 11 HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. CAUTION:You must be able to safely lift 45 pounds (20 kg) in order toraise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown a...

Page 12 - TROUBLESHOOTING; PROBLEM: The power does not turn on; c. Check the on/off circuit breaker located on the; PROBLEM: The power turns off during use; wait for five minutes and then press the switch back in.; PROBLEM: The displays of the console do not function properly; Tripped; Top

12 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, andfollow the steps listed. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mount...

Page 13 - b. If the walking belt slips when walked on, first remove

13 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be-come damaged. Remove the key an...

Page 14 - CONDITIONING GUIDELINES; Each workout should include the following three parts:

14 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex-ercise program. For more detailed exercise informa-tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen yourcardiovascular system, the key to ach...

Page 16 - PART IDENTIFICATION CHART

3/4” Screw (13)–13 Wheel Bolt (36)–2 3/4” Tek Screw (25)–2 1 1/4” Tek Screw (87)–2 5/16” Washer (57)–2 Silver Screw (70)–1 2 1/2” Bolt (53)–6 Star Washer (9)–4 1” Bolt (8)–4 Wheel Nut (38)–2 Remove this chart and use it to identify small parts during assembly. Savethis chart and the EXPLODED DRAWING...

Page 18 - EXPLODED DRAWING—Model No. WLTL29321

22 65 25 24 56 25 42 13 77 59 99 13 14 13 76 90 4 13 13 10 92 46 13 13 94 12 17 20* 27 19 18 31 30 29 28 21 70 2 25 25 43 44 45 50 98 48 48 39 51 23 81 25 15 69 68 67 93 5 74 84 83 39 83 39 25 7 48 16 38 38 75 55 54 73 80 71 25 3 52 82 79 77 52 3 17 17 6 31 32 79 48 86 87 1 49 49 36 37 38 37 38 36 4...