Page 2 - CONTENTS; WELCOME 3; 0V 5A Quick Charger
CONTENTS WELCOME 3 Introduction ..................................................................................................... 3Specifications ................................................................................................... 3 SAFETY 4 General Safety Rules .....................
Page 3 - safety for both yourself and others.
SPECIFICATIONS INTRODUCTION Thanks for purchasing the WEN Brad Nailer. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to ...
Page 4 - GENERAL SAFETY RULES; WORK AREA SAFETY
GENERAL SAFETY RULES WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmo- spheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ig- nite the dust or fumes....
Page 5 - POWER TOOL USE AND CARE
GENERAL SAFETY RULES 7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. POWER TOOL USE AND CARE 1. Do not force the power tool. Use the correct power tool fo...
Page 6 - BRAD NAILER SAFETY WARNINGS; BRAD NAILER SAFETY
BRAD NAILER SAFETY WARNINGS BRAD NAILER SAFETY 1. THIS TOOL IS DESIGNED for household use only, not for industrial or professional purposes. Do not force the tool to do a job for which it was not designed. 2. INSPECT TOOL BEFORE USE. Do not operate if any portion of the tool, trigger, or safety brac...
Page 7 - GUIDELINES AND RECOMMENDATIONS FOR EXTENSION CORDS; Use a separate electrical circuit for your tool.
ELECTRICAL INFORMATION (CHARGER) AMPERAGE REQUIRED GAUGE FOR EXTENSION CORDS 25 ft. 50 ft. 100 ft. 150 ft. 0.5A 18 gauge 16 gauge 16 gauge 14 gauge IMPORTANT: Servicing a double-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personne...
Page 8 - BATTERY & CHARGER SAFETY WARNINGS; ABOUT THE BATTERY
BATTERY & CHARGER SAFETY WARNINGS ABOUT THE BATTERY 1. The battery pack has to be charged completely before you use the tool for the first time.2. For optimum battery performance, avoid low discharge cycles by charging the battery pack frequently.3. Lithium-ion batteries are subject to a natural...
Page 9 - UNPACKING; UNPACKING & PACKING LIST; PACKING LIST; TOOL PURPOSE; KNOW YOUR BRAD NAILER; Description
UNPACKING Carefully remove the brad nailer from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories. If ...
Page 10 - ASSEMBLY & ADJUSTMENTS; CHARGING THE BATTERY PACK; Battery Life Indication:; INSERTING AND REMOVING THE BATTERY
ASSEMBLY & ADJUSTMENTS CHARGING THE BATTERY PACK The 20V battery pack for this tool is supplied in a low charge condition to prevent possible problems, and must be charged completely before you use the tool for the first time.1. Connect charger to a 120V, 60Hz AC outlet. The green light on the c...
Page 11 - ADJUSTING THE BELT HOOK
ASSEMBLY & ADJUSTMENTS ADJUSTING THE BELT HOOK 1. Using a screwdriver (not included), loosen the belt hook screw by turning it counterclockwise.2. Rotate the belt hook (Fig. 1- 1) to your desired posi- tion.3. Using a screwdriver (not included), tighten the belt hook screw by turning it clockwis...
Page 12 - ADJUSTING THE DEPTH OF DRIVE; Mode; LED INDICATOR
ASSEMBLY & ADJUSTMENTS ADJUSTING THE DEPTH OF DRIVE To adjust the depth of drive of the nail, use the depth adjustment wheel (Fig. 4 - 1) on top of the tool’s nose. Experiment on a piece of scrap wood to find the proper depth for your workpiece. • To increase the depth of drive: Rotate the depth...
Page 13 - OPERATION; FIRING FASTENERS
OPERATION FIRING FASTENERS 1. Check that the fasteners have been loaded into the magazine and that the magazine is securely locked in place.2. Attach the battery to the battery terminal on the nailer.3. Test the driving depth on a scrap piece of wood. If the fasteners penetrate too deeply, decrease ...
Page 14 - MAINTENANCE; CLEANING
MAINTENANCE CLEANING Keep tools clean for better and safer performance. Wipe the tool clean with a damp towel and mild soap. Blow the tool clean using compressed air, then use non-flammable cleaning solutions to wipe exterior of the tool as neces- sary. Do not soak tool with cleaning solutions. Such...
Page 15 - TROUBLESHOOTING GUIDE
PROBLEM CAUSE SOLUTION The tool doesn’t turn ON. (LED does not turn ON) 1. The battery is low or not charged. 1. Charge the battery. 2. The battery is damaged. 2. Replace the battery (model 20202). 3. The firing contact pin is locked in posi- tion. 3. Unlock the firing contact pin. 4. The battery te...
Page 17 - EXPLODED VIEW & PARTS LIST
Page 20 - WARRANTY STATEMENT; LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser on...
