Weed Eater RT10 - Manuals

5 OPERATION Use only a voltage supply as specified on your unit. SELECT AN EXTENSION CORD Extension Cord Gauge Chart Length of Cord Gauge 25 Ft. (7.5 m) 50 Ft. (15 m) 100 Ft. (30 m) 18 Gauge 16 Gauge 16 Gauge Extension cords are available for this unit. ATTACH THE EXTENSION CORD TO YOUR TRIMMER Loop...

6 SERVICE REPLACING THE LINE S Disconnect unit from the power source. S Remove the spool by firmly pulling on the tap button. S Clean entire surface of hub and spool. S Replace with a pre-wound spool or cut a length of 30 feet of 0.065 inch (1.65 mm) diameter Weed Eater r brand line. Use of heavier ...

7 TROUBLE CAUSE REMEDY Trimmer head stops under a load or does not turn when switch is pressed. 1. Allow tip of line to do the cutting. 2. Contact your authorized service dealer . 3. Check breaker box. 4. Remove debris. Line does not advance or breaks while cutting. 1. Check line routing. 2. Rewind ...

8 LIMITED WARRANTY ELECTROLUX HOME PRODUCTS NORTH AMERICA, Division of WCI Outdoor Products, Inc. , warrants to the original purchaser that each new Weed Eater r r r r brand electric or cordless product is free from defects in material and workmanship and agrees to repair or replace under this warra...