Page 2 - IDENTIFICATION OF SAFETY SYMBOLS
2 IDENTIFICATION OF SAFETY SYMBOLS WARNING: This unit can be dangerous! Careless or improper use can cause serious injury. Read the operator’s manual before use. Failure to follow instructions could result in serious injury. Save operator’s manual. Trimmer line can throw objects violently. You can b...
Page 3 - OPERATOR SAFETY
3 IDENTIFICATION OF SAFETY SYMBOLS When servicing unit, use only identical replace- ment parts. Store unit indoors in a high, dry place out of the reach of children. Always stop unit and disconnect spark plug before cleaning or servicing. WARNING: Fire hazard. Never mix, pour, or store gasoline or u...
Page 5 - ASSEMBLY; SHAFT ASSEMBLY
5 ASSEMBLY WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure. Examine parts for damage. Do not use dam- aged parts. NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723. It is normal for the fuel filt...
Page 6 - OPERATION; HELPFUL TIP
6 OPERATION KNOW YOUR TRIMMER READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Assist Handle Line Limiter Blade ...
Page 8 - STARTING A FLOODED ENGINE; OPERATING INSTRUCTIONS; OPERATING POSITION
8 STARTING A FLOODED ENGINE Flooded engines can be started by placing the choke lever in the RUN position; then, pull the rope to clear the engine of excess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded. If the unit still doesn’t start, ref...
Page 9 - MAINTENANCE
9 SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side. MAINTENANCE WARNING: Disconnect the spark plug before performing maintenance except for carburetor adju...
Page 10 - SERVICE AND ADJUSTMENTS
10 REPLACE SPARK PLUG Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed and nonadjustable. 1. Twist, then pull off spark plug boot. 2. Remove spark plug from cylinder and dis- card. 3. Replace wi...
Page 11 - STORAGE; SEASONAL STORAGE; ENGINE
11 Air Filter Cover Idle Speed Screw If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723. STORAGE WARNING: Perform the following steps after each use: S Allow engine to cool, and secure the unit before storin...