Weed Eater 545146904 - Manuals

-- 6 -- blower tubes. The rotating blades can cause serious injury. 1. Insert the tip of a screwdriver into the latch area of the vacuum inlet. Latch Area Blower Outlet Vacuum Inlet Cover Latch Area 2. Gently tilt the handle of the screwdriver to- ward the front of the unit to release the latch whil...

-- 7 -- OPERATION KNOW YOUR BLOWER READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Choke Lever Fuel Mix Fill Ca...

-- 8 -- S To reduce noise levels, operate power blowers at the lowest possible throttle speed to do the job. S Use rakes and brooms to loosen debris be- fore blowing. S In dusty conditions, slightly dampen sur- faces or use a mister attachment when wa- ter is available. S Conserve water by using pow...

-- 9 -- Choke Lever Starter Handle Primer Bulb 4. Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times. 5. As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position. 6. Pull starter rope sharply u...

-- 11 -- CARBURETOR IDLE SPEED ADJUSTMENT The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions: S Engine will not idle when the throttle is re- leased. To adjust idle speed: Allow engine to idle. Adjust speed until engine ru...