Weed Eater 545117528 - Manuals

5 SAVE THESE INSTRUCTIONS ASSEMBLY WARNING: Stop the unit and dis- connect from the power source before opening the inlet cover or attempting to in- sert or remove the inlet restrictor, blower tube, or vacuum tubes. The motor must be stopped and the impeller blades no longer turning to avoid serious...

7 NOTE: If you are unable to locate the inlet restrictor, the unit will still operate. This restrictor improves the blower function. 4. Remove the collection bag. 5. Close the inlet cover and make sure it is latched closed. 6. Re-install the blower tube. Refer to AT- TACHING THE BLOWER TUBE for inst...

8 USING YOUR UNIT KNOW YOUR ELECTRIC BLOWER READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations to your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Variable Speed Contro...

9 NOTE: The variable speed control will not function with the switch in the HIGH (high speed) position. With the switch in the VAR (variable speed) position, the motor speed can be increased by moving the control toward the + position or decreased by moving the control toward the -- position. Variab...

10 S ON/OFF Switch -- Ensure switch func- tions properly by moving the switch to the OFF position. Make sure motor stops; then restart motor and continue. S Inlet Cover -- Discontinue use of unit if inlet cover fails to latch properly or if it is damaged in any way. AFTER EACH USE INSPECT AND CLEAN ...

11 TROUBLESHOOTING TABLE SYMPTOM CAUSE REMEDY Unit fails to operate. 1. Switch in the OFF position. 2. Extension cord discon-- nected. 3. Circuit breaker tripped, or fuse blown. 4. Mechanical failure 1. Slide switch to HIGH or VAR position. 2. Reconnect extension cord. 3. Reset circuit breaker or fu...