Weed Eater 530163448 - Manuals

5 S If engine does not stop, move choke to theFULL CHOKE position. EngineON/STOPSwitch Choke Lever FULL HALF OFF HOW TO START YOUR UNIT WARNING: The trimmer head will turn while starting the engine. Avoid any con-tact with the muffler. A hot muffler can causeserious burns. STARTING A COLD ENGINE (or...

6 To stop engine: S Release the throttle trigger. S Push and release the engine ON/STOPswitch. TRIMMER LINE ADVANCE The trimmer line will advance approximately 2in. (5 cm) each time the bottom of the trimmerhead is tapped on the ground with the enginerunning at full throttle.The most efficient line ...

7 SWEEPING -- The fanning action of the rotat-ing line can be used for a quick and easyclean up. Keep the line parallel to and abovethe surfaces being swept and move the toolfrom side to side. Sweeping MAINTENANCE WARNING: Disconnect the spark plug before performing maintenance exceptfor carburetor ...

8 SERVICE AND ADJUSTMENTS LINE REPLACEMENT 1. Remove spool by firmly pulling on tap button.2. Clean entire surface of hub and spool.3. Replace with a pre-wound spool, or cut two lengths of 12-1/2 feet of 0.080 ! (2 mm) diam- eter Weed Eater r brand line. WARNING: Never use wire, rope, string, etc., ...

10 LIMITED WARRANTY ELECTROLUX HOME PRODUCTS, INC.,warrants to the original purchaser that each newWeed Eater r brand gasoline tool or attachment is free from defects in material and workmanship and agrees to repair or replaceunder this warranty any defective gasolineproduct or attachment as follows...