WD 4CH TRIPLEX - Manuals - manualsarea.com

Page 2 - SAFETY PRECAUTIONS; accompanying the appliance.

SAFETY PRECAUTIONS EXPLANATION OF SYMBOLS This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance. This symbol is intended to alert the user to the presence of unprotected “dangerous voltag...

Page 3 - Table of Contents

Table of Contents 1. Features .......................................................................................................................................................................... 8 2. Name, Function and Connection....................................................................

Page 7 - WARNING; DVR should be turned off first.

WARNING The authorized expert must install DVR. When connecting a camera, audio, or sensor cables DVR should be turned off first. Please be aware that the company is not responsible for the damages caused from using unauthorized goods and not following the instructions from the manual. The company i...

Page 13 - CONTENTS; CODE

2-4. Specification INPUT 4 composite BNC (NTSC/PAL) – 1.0Vp-p 1 composite BNC (NTSC/PAL) – 1.0Vp-p 1 S-VIDEO VIDEO OUTPUT 4 composite loop-back INPUT 4 Line In (RCA) AUDIO OUTPUT 1 Line Out (RCA) INPUT 4 (Power input: DC 10~12V ) ALARM OUTPUT 2 COMPRESSION MPEG-2 VIDEO FORMAT NTSC PAL RESOLUTION 360...

Page 18 - Select LIVE and press SEL button to show LIVE setup menu.

3. Press SEL button when the cursor is LABEL field (channel name). A keyboard will appear for you to type in a new name. 4. Name the label (channel name) by using buttons and SEL button. Press enter to save. The name is changed in LABEL field. 4-2-2-2. Status Display 1. Select LIVE and press SEL but...

Page 29 - CAPTURE button then QUAD passage will appear on each cell.

4-3-4-2. Mapping Recording methods and Front Buttons Front Buttons Recording Method Detailed Feature REW SENSOR Record when the sensor is activated BACK JUMP/STEP MOTION Record when motion is detected PLAY/PAUSE RECORD Record continuously JUMP/STEP MOTION & SENSOR Record by sensor and motion det...

Page 31 - The default password is “1111.”; Reset DVR to factory default settings.

4-4-2. USER PASSWORD USER PASSWORD can be edited here. 1. Place the cursor on the “Select” and press SEL button. 2. CURRENT PASSWORD: Enter the current password and press SEL button. 3. NEW PASSWORD: Enter a new password and press SEL button. 4. RETYPE PASSWORD: Retype the new password and press SEL...

Page 32 - It displays current date, which can be edited.

Supported date formats and examples YYYY-MM-DD 2003-07-11 MM-DD-YYYY 07-11-2003 DD-MM-YYYY 11-07-2003 YYYY/MM/DD 2003/07/11 4-4-5. CURRENT DATE It displays current date, which can be edited. 1. Place the cursor on the Current Date field and press SEL button. This will highlight the first part of the...

Page 33 - Displays the current time, which can be edited.; NOTICE

5. Press “YES” to delete the related data or press “NO” to keep the data and cancel the date change. WARNING If the user selects <YES>, all the data from the changed date will be deleted. 4-4-6. CURRENT TIME Displays the current time, which can be edited. 1. Place the cursor on the Current Tim...

Page 34 - Press SEL button to apply the changed time.

4-4-8. DYALIGHT SAVING 1. Press buttons to decide whether to apply DAYLIGHT SAVING or not by selecting <ON> or <OFF>. 2. After selecting <ON>, move the cursor to BEGIN (MM/DD/HH) field and press SEL button. This will highlight the front part of the displayed date in yellow. 3. Use ...

Page 36 - Site description of DVR is shown and can be edited here.; LOG files are shown here.

4-5. INFO Select INFO from the SETUP menu and press SEL button to go to INFO setup screen. 4-5-1. SITE ID Site description of DVR is shown and can be edited here. Enter in the site description by using buttons and SEL button and press the ENTER key on the keyboard to save and apply the new descripti...

Page 39 - User can turn ON or OFF the sound of inter buzzer.

2. Press buttons and SEL button to type an email address on the keyboard, and use “ENTER” button on the keyboard to save and apply the changed e-mail address. 3. Move the cursor under Mail Server IP field and press SEL button to select the IP number. Then the first part should turn into yellow color...

Page 41 - first part of IP address in yellow color.

4-7-2. LAN Users connected to LAN network, which uses static IP addresses, should follow the setup described below. 1. Press buttons to set network type to <LAN>. 2. Press buttons to set DHCP to <OFF>. 3. Press buttons to set DDNS to <ON>. 4. Use buttons to edit DDNS SERVER IP Addr...

Page 42 - ADSL service ID. Then the keyboard will appear.

1. Press buttons to set network type to <LAN>. 2. Press buttons to set DHCP to <ON>. 3. Press buttons to set DDNS to <ON>. 4. Use buttons to edit DDNS SERVER IP Address. And press SEL button to apply the changed DDNS SERVER IP address. NOTE To use DDNS function, the DVR Serial numb...

Page 43 - All data will

3. Press buttons and SEL button to type the ADSL service ID on the keyboard, and use “ENTER” button on the keyboard to save and apply the saved ID. 4. Edit PASSWORD using the same method as editing SERVICE ID. 8. Press buttons to set DDNS to <ON>. 5. Use buttons to edit DDNS SERVER IP Address....

Page 44 - formatting will not proceed and all saved data will be maintained.; This menu is to be enabled only when DVR has CD-RW.

2. If you select “YES,” DVR will reconfirm the formatting procedure, showing “ Do you really want to delete all data?” 3. Formatting will proceed when you select “YES”. If you select “NO”, the hard disk formatting will not proceed and all saved data will be maintained. WARNING Formatting the hard di...

Page 52 - Connect an USB flash memory stick into USB port.; Press the MISC button; in triple; to go to the screen where PTZF can be adjusted.

5-7-3. Still image Backup in USB flash memory stick 1. Connect an USB flash memory stick into USB port. 2. Select the still image that you want to backup in an USB flash memory stick. Please refer to “5-8-2. Viewing Captured Image”. 3. Press SEL button. Then the still image will be stored in an USB ...

Page 56 - blending Adjustment; HUE – to adjust the CONTRAST level of the selected channel using

5-9. Brightness, Contrast, Hue, Saturation & Alpha- blending Adjustment Press the MISC button twice to go to the screen where brightness, contrast and alpha-blending can be adjusted. 1. BTIGHTNESS – to adjust the BRIGHTNESS of the selected channel using buttons. 2. CONTRAST – to adjust the CONTR...

Page 57 - -10. OSD position and Screen size Adjustment

5-10. OSD position and Screen size Adjustment The position of OSD on LIVE screen can be adjusted up and down. Depending on the characteristics of the monitor, being able to adjust the position of OSD and Screen Size may be a very useful feature. 5-10-1. Adjusting OSD Ceiling & Bottom Line Place ...

Page 62 - Connect THE SENSOR SIGNAL LINE; Warning; Please go to “STORAGE” in the SETUP menu.

5-14. Sensor Installation DVR can connect up to 4sensors. There are two simple steps to install the sensors. Connect THE SENSOR SIGNAL LINE Connect the sensor power line (10~12V) Warning Vice versa connection of Positive and Negative will occur a fatal error or a malfunction of DVR. 5-15. Video back...

Page 63 - not select Q, QUAD mode will not be backed up on the CD.; Please go to SEARCH and select PLAYBACK VIDEO button.; up data on CD only in Network Client S/W.

3. If the recorded data on DVR is QUAD mode, you need to select Q on VIDEO. If you do not select Q, QUAD mode will not be backed up on the CD. 4. If the selected data volume exceeds CD media size, you need to put another CD in. And then DVR automatically proceeds backing up from the end of the data ...

Page 64 - -1. Installing HDD in removable HDD rack; Prepare a hard disk and rack as shown below.

6. HDD Installation 6-1. Installing HDD in removable HDD rack For DVR, the hard disk, on which images are saved, is installed into the RACK. The hard disk is installed into DVR as shown in the following instructions. 1. Prepare a hard disk and rack as shown below. 2. Set the hard disk to master. (Re...

Page 66 - ITEM INDICATOR; POWER GREEN; DVR must be turned off when one installs a hard disk into DVR.

6-3. HDD Indicator When the POWER is on, the hard disk indicator is displayed as the chart shows. ITEM INDICATOR POWER GREEN LED HDD ACCESS YELLOW LED WARNING 1. DVR must be turned off when one installs a hard disk into DVR. 2. DVR must be turned off when changing hard disk. 3. The system will recog...

Page 69 - related Mail Server’s IP address in the INFO menu.

For setting up an email address for sending out assigned IP addresses to the client user, please refer to “4-5-5. SEND MAIL (IP ADDRESS Mailing)”. IMPORTANT To receive e-mail with Dynamic IP address from DVR, User has to apply IP address of Mail Server run by Manufacturer on the field of “MAIL SERVE...

Page 70 - Do the following before starting installation.

For setting up an email address for sending out assigned IP addresses to the client user, please refer to “4-5-5. SEND MAIL (IP ADDRESS Mailing)”. IMPORTANT To receive e-mail with Dynamic IP address from DVR, User has to apply IP address of Mail Server run by Manufacturer on the field of “MAIL SERVE...

Page 75 - D. SCHEDULE SETTING

ALARM: Select the alarm to be set off when Sensor is activated CHANNEL: Select the channel to be recorded when Sensor is activated DURATION: Select the duration of alarm and recording time when Sensor is activated Please refer to “4-3-2. QUAD Recording Mode”. D. SCHEDULE SETTING The schedule setup a...

Page 76 - A. SYSTEM INFORMATION

7-6-2. LIVE D. CH1 / CH2 / CH3 / CH4 LABEL: Show the selected channel name P/T/Z/F TYPE: Select the appropriate camera protocol for the channel E. ROTATION SETTING CHANNEL: Select a channel to rotate DURATION: Select the time interval between each channel for automatic channel rotation. Please refer...

Page 78 - Saving Settings

7-6-5. BACKUP Available backup file format *.nsf – This format can be playback only in network client S/W. *.avi – This format can be playback only in Media Player. 7-6-6. Saving and Uploading Settings 1. Saving Settings If you wish to use the current settings later on, customize the settings and pr...

Page 84 - Networking by Web Browser; -1. Download Web Brower Viewer and Connection; address and password will appear.

8. Networking by Web Browser 8-1. Download Web Brower Viewer and Connection 1. Enter the DVR IP address. Then the window will appear as bellow. Click “YES” to download Web Browser Viewer from the server run by the manufacturer. NOTE Web Browser Viewer is to be downloaded from the server run by the m...

Page 86 - Networking by DDNS (Dynamic Domain Name; Register your own domain name on DDNS Server.; can access network with your own domain name.

8-2-3. BACKUP 9. Networking by DDNS (Dynamic Domain Name Server) 1. Check the serial number of DVR from SETUP>INFO>SYSTEM>SERIAL ID. 2. Please contact a distributor or an installer to register the DVR on DDNS Server. 3. Register your own domain name on DDNS Server. NOTE If your own domain n...

Page 87 - Playback of local HDD in Network Client S/W; Take HDD out from DVR and connect it to PC as Slave.; Network access beyond Rauter; Live channels, and Storage channels

10. Playback of local HDD in Network Client S/W 1. Take HDD out from DVR and connect it to PC as Slave. 2. Please go to CMOS setup and confirm that CMOS recognizes HDD and its size or not. 3. Save CMOS setting and boot PC. 4. Run Network Client S/W. 5. Press SEARCH button and then SITE button of Net...