Vizio XMF1000 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; This mount fits most screens from 32” to 55”.

IMPORTANT SAFETY INFORMATION Read the Important Safety Information on this page before installing or using this mounting system. Always follow the instructions in this Quick Install Guide. VIZIO is not liable for damage or injury caused by incorrect mounting, assembly, or use. This mount fits most s...

Page 3 - STEP 1 - BEFORE YOU BEGIN; YOU WILL NEED; Power Drill; all; of the following items.

STEP 1 - BEFORE YOU BEGIN YOU WILL NEED Power Drill 1/2” (12.7mm) Concrete Drill Bit 7/32” (5.5mm) Drill Bit Pencil Electronic Stud Finder Phillips-head Screwdriver 1/2” Wrench Before you begin the installation, ensure you have all of the items listed on this page. Do not begin the installation unle...

Page 4 - STEP 2 - REVIEW THE PACKAGE CONTENTS

STEP 2 - REVIEW THE PACKAGE CONTENTS Before you begin, ensure all parts are included and undamaged. To prevent loss, do not unpack the small parts until they are required. If any parts are missing or damaged, contact VIZIO Customer Service (877) 698-4946. 2 x 2 x 2 x 1 x 1 x 1 x 1 A B C D E F x 1 x ...

Page 6 - STEP 3A - MOUNTING TO A WALL WITH WOOD STUDS; If you are mounting on a concrete wall, go to Step 3B on page 10.

STEP 3A - MOUNTING TO A WALL WITH WOOD STUDS The mount can be attached to walls with wood studs. The wall covering (drywall, lath, plaster, etc.) may not be thicker than 1/2”. If you are mounting on a concrete wall, go to Step 3B on page 10. 1. Use the electronic stud finder to locate two studs in t...

Page 10 - lag bolts; and; washers; from the pouch; LAG; Insert Screw in

8 9. Remove 2 lag bolts and 2 washers from the pouch labeled LAG . Use a wrench to insert the lag bolts and washers as shown. Tighten the bolts completely. 10. Attach the handle ( part F ) to the end of the bar. Secure the handle to the bar by inserting a screw ( part H ) into the bottom hole on the...

Page 11 - part H; into the bottom hole on the handle. Tighten the screw completely.; Go to Step 4 on page 15.

OPTIONAL: The extender can be attached to lengthen the bar. A longer bar may be easier to access when mounting large TVs. To attach the extender, push it onto the end of the bar. Secure the extender to the bar by inserting a screw ( part H ) into the bottom hole on the extender. Tighten the screw co...

Page 12 - STEP 3B - MOUNTING TO A CONCRETE WALL; anchor; from the pouch labeled; ANCHOR; Pencil Mark

1 STEP 3B - MOUNTING TO A CONCRETE WALL 1. Determine the height at which you want the mount to hang. Mark the position of the left bracket hole with a pencil. Using the power drill and the 1/2” concrete drill bit, drill a hole into the pencil mark. Drill about 2 1/2” deep. 2. Remove 1 anchor from th...

Page 14 - part A; Allow the attached bracket to swing down.; anchors; Pencil Marks

5. Remove the bar, the leveler, and the unattached bracket ( part A ) from the wall. Allow the attached bracket to swing down. Using the power drill and the 1/2” concrete drill bit, drill into the 3 pencil marks as shown. Drill each hole about 2 1/2” deep. 6. Remove 3 anchors from the pouch labeled ...

Page 17 - STEP 4 - ATTACHING THE TV HOOKS AND KICK STANDS; part B; ) against the top 2 mounting holes as; Mounting Holes

STEP 4 - ATTACHING THE TV HOOKS AND KICK STANDS 1. Gently place the TV on the floor screen-down. You may want to place a rug or blanket beneath the screen to prevent scratches. In your TV’s User Guide, find the size and depth of your TV’s mounting holes. These will be listed as M4 , M5 , M6 , or M8 ...

Page 18 - If you want your TV to have a 9° downward tilt when; part G; ) and the longer screws when

OPTIONAL: If you want your TV to have a 9° downward tilt when mounted, use the spacers ( part G ) and the longer screws when mounting the TV hooks. 3. Using the screwdriver, insert the screws and washers as shown. Because each TV is different, your VIZIO TV mount includes screws of different lengths...

Page 20 - STEP 5 - HANGING THE TV ON THE MOUNT; With the help of another person

STEP 5 - HANGING THE TV ON THE MOUNT 1. Turn the handle on the bar until the flat side of the bar is facing the wall. 2. With the help of another person , lift the TV and hang the TV hooks on the bar as shown. This step requires lifting the TV. To prevent injury to yourself or damage to your TV, per...

Page 22 - TECHNICAL SUPPORT; security screw

TECHNICAL SUPPORT Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone. For more information on warranty service or repair, afte...