Vizio VZL-6011 - Manuals - manualsarea.com

Page 2 - parts overview

1. Diagram www.vax.co.uk 2 parts overview 1 1 Handle Grip 2 Handle/Extension Wand 3 Carry Handle 4 Foam Filter (located behind dirt container) 5 Exhaust Hepa Filter (located under dirt container) 6 Dirt Container Release Button 7 On/Off Switch 8 Dirt Container 9 Central Dust Chamber 10 Bin Release E...

Page 3 - safety information; Safety Information; For Household Use Only; Motor Thermostat

3 Vax Careline 0870 606 1248 safety information 2. Safety Information For Household Use Only When using the vacuum cleaner, basic safety precautionsshould always be observed, including the following: 1. Only use the vacuum cleaner indoors on drysurfaces. 2. Turn off the vacuum cleaner controls befor...

Page 4 - how to assemble / how to operate; Handle Assembly; BACK; ON

www.vax.co.uk 4 how to assemble / how to operate 3. How to assemble Handle Assembly Slide handle through top ofback panel until it snapsinto place. Tool Storage Attach tools: (a) Slide the dust brush into the hole on theback of the cleaner with bristles facing out. (b) Slide thecrevice tool onto rou...

Page 5 - how to operate; Floor/Carpet Cleaning

5 Vax Careline 0870 606 1248 how to operate Floor/Carpet Cleaning Move the handle and adjust it to the desired position for(a) storing the upright, (b) operating the cleaner, and (c)de-press the handle release pedal again to clean underfurniture. NOTE: Brushbar could cause rug fringe area tobecome t...

Page 6 - dirt container and filter; to reduce risk of injury from moving

www.vax.co.uk 6 dirt container and filter 5. Dirt container & filter:removal & replacement WARNING: to reduce risk of injury from moving parts - unplug before servicing. Press dirt container release button and remove dirtcontainer from cleaner. Hold dirt container inside rubbish bin (Fig.5/2...

Page 7 - The filter housing also needs to be washed

7 Vax Careline 0870 606 1248 dirt container and filter NOTE: The filter housing also needs to be washed regularly with cold water and dried thoroughly beforereplacing and restarting the vacuum cleaner. Remove exhaust filter Press tab on side of exhaust cover and lift to remove. Press tab on exhaust ...

Page 8 - belt or brushbar; To remove belt; MOTOR SHAFT

www.vax.co.uk 8 belt or brushbar 6. Belt or brushbar: removaland replacement TOOL REQUIRED: Phillips screwdriver WARNING: to reduce the risk of injury from moving parts - unplug cleaner before changing belt or brush. To remove belt Lay cleaner flat and flip cleaner to expose nozzle base.Base should ...

Page 9 - belt or brushbar / lightbulb removal and replacement; flathead screwdriver

9 Vax Careline 0870 606 1248 belt or brushbar / lightbulb removal and replacement 7. Lightbulb: removal andreplacement TOOL REQUIRED: flathead screwdriver WARNING: to reduce risk of electric shock - unplug cleaner before removing or replacing lightbulb. For bulb replacement call 0870 606 1248 Using ...

Page 10 - general maintenance; General maintenance; Debris removal/nozzle guard; PROBLEM: Brushbar does not turn

www.vax.co.uk 10 general maintenance 8. General maintenance WARNING: to reduce risk of injury from moving parts - unplug before servicing. Debris removal/hose Debris removal/nozzle guard • Check to see if dirt container is full; empty if needed. • Plug cleaner in and check to see if there is any suc...

Page 11 - Technical Specification; Filters: Foam pre-motor pleated HEPA exhaust filters

11 Vax Careline 0870 606 1248 troubleshooting / service & help / technical specification 10. UK Service & Help Vax Care 0870 6061248 Monday-Friday 8.00am to 8.00pm. Saturday-Sunday 9.00am to 5.00pm. Any queries or concerns about using the Vax, call theVax Careline. Calls are charged at the U...

Page 12 - EEC STATEMENT OF COMPLIANCE; 004/108/EC Electromagnetic Compatibility Directive

EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the VZL-6011 Mach1 Upright is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive EMC: 2004/108/EC Electromagnetic Compatibility Directive...